基于&ldquo;等功&rdquo;原理的滚动体导向面设计方法及振动性能分析

PDF(1639 KB)

振动与冲击 ›› 2021, Vol. 40 ›› Issue (19) : 18-25.

论文

基于“等功”原理的滚动体导向面设计方法及振动性能分析

荣伯松1,宋现春2,王继坤3,姜洪奎2

作者信息 +

Design method and vibration performance analysis of rolling element guide surface based on “equal work” principle

RONG Baisong1, SONG Xianchun2, WANG Jikun3, JIANG Hongkui2

Author information +

文章历史 +

摘要

滚柱直线导轨副工作时，滚柱进出承载区会引起滑块振动及摩擦力变化。为了控制及减小这种变化，对滑块的轨道导向面的结构设计方法展开研究，结合滚柱进入承载区受力形变的原理，建立了一种基于“等功”原理的导向面计算模型，推导出导向面的参数方程，通过试验对改进设计的导轨副振动性能进行测试分析。结果表明，优化后的滑块轨道导向面可有效降低滑块的振动及运动噪声。

Abstract

When roller linear guide pair works, rollers in and out of load-bearing area can cause slider vibration and friction force change. Here, to control and reduce this change, the structural design method for rail guide surface of slider was studied. Combined with the principle of force-deformation when roller enters load-bearing area, a calculation model of guide surface based on the principle of "equal work" was established, and the parameter equation of guide surface was derived. The vibration performance of design-improved guide pair was tested and analyzed through tests. The test results showed that the optimized slider rail guide surface can effectively reduce slider vibration and motion noise.

导出引用

荣伯松,宋现春,王继坤,姜洪奎. 基于“等功”原理的滚动体导向面设计方法及振动性能分析[J]. 振动与冲击, 2021, 40(19): 18-25

RONG Baisong, SONG Xianchun, WANG Jikun, JIANG Hongkui. Design method and vibration performance analysis of rolling element guide surface based on “equal work” principle[J]. Journal of Vibration and Shock, 2021, 40(19): 18-25

参考文献

［1］毛宽民, 李斌, 谢波, 等.滚动直线导轨副可动结合部动力学建模［J］.华中科技大学学报(自然科学版)，2008,36(8):85-88.
MAO Kuanmin,LI Bin,XIE Bo, et al. Dynamic modeling of the movable joint on rolling linear guide［J］. Journal of Huazhong University of Science and Technology (Natural Science Edition)，2008,36(8):85-88.
［2］毛宽民,龚灿,李斌,等.考虑波纹度的滚珠直线导轨动力学建模研究［J］.华中科技大学学报(自然科学版)，2014,42(6): 1-5.
MAO Kuanmin, GONG Can, LI Bin, et al. Dynamic modeling research of linear motion ball guide considering suraface waviness［J］.
Journal of Huazhong University of Science and Technology (Natural Science Edition)，2014,42(6): 1-5.
［3］熊小辉. 滚柱直线导轨副接触问题的动力学分析［D］. 武汉:华中科技大学, 2013.
［4］成建平,杨家军,程远雄,等.滚柱直线导轨结合面的振动分析［J］.机电工程,2013,30(3):296-299.
CHENG Jianping, YANG Jiajun, CHENG Yuanxiong, et al.Vibration analysis of the joint surface of roller linear guides［J］.Mechanical & Electrical Engineering， 2013,30(3):296-299.
［5］李磊, 张建润, 刘洪伟. 直线滚动导轨副动态特性分析［J］.振动与冲击，2012,31(18):111-114.
LI Lei,ZHANG Jianrun,LIU Hongwei.Dynamic characteristics of a linear motion guide［J］. Journal of Vibration and Shock,2012,31(18):111-114.
［6］MATSUMOTO J, FUJISAWA. Linear guide apparatus: US2005/0157962［P］. 2015-07-21.
［7］姜大志，应强，孙俊兰，等.基于等刚度的滚动直线导轨副过渡曲线设计［J］.机械设计,2006,23(12): 16-17.
JIANG Dazhi, YING Qiang, SUN Junlan, et al. Design of transition curve of rolling linear guide pair based on constant stiffness［J］.Mechanical Design,2006,23(12): 16-17.
［8］应强.滚动直线导轨副静刚度的研究及过渡曲线的设计［D］.无锡：江南大学，2007.
［9］刘志峰, 李丹丹, 蔡力钢, 等. 考虑导轨位移波动误差影响的滚柱直线导轨振动分析［J］. 振动与冲击,2016,35(23):23-28.
LIU Zhifeng, LI Dandan, CAI Ligang, et al. Vibration analysis of roller linear guides considering the influence of rail displacement fluctuation error［J］. Journal of Vibration and Shock, 2016,35(23):23-28.
［10］宋现春,荣伯松,姜洪奎,等.高速滚柱直线导轨副结构优化设计及其性能测试［J］.制造技术与机床, 2015(12):141-145.
SONG Xianchun, RONG Bosong, JIANG Hongkui, et al. Optimization design and performance test of high-speed roller linear guide pair structure［J］.Manufacturing Technology & Machine Tool, 2015 (12): 141-145.
［11］姜洪奎,宋现春,李保民,等.基于滚珠丝杠副流畅性的滚珠返向器型线优化设计［J］.振动与冲击,2012, 31(2):38-42.
JIANG Hongkui, SONG Xianchun, LI Baomin, et al. Optimal design of passage profile of a ball returner based on fluency of a ball screw mechanism［J］. Journal of Vibration and Shock, 2012,31(2):38-42.
［12］SONG X C, CHEN H J, JIANG H K, et al. Improved design of roller linear guide for heavy load based on finite element method and measurement［J］. Advances in Mechanical Engineering, 2018,10(9):1-8.
［13］陈蓉,欧屹,冯虎田.预紧力对滚柱直线导轨副振动特性的影响研究［J］.组合机床与自动化加工技术,2018(3):11-18.
CHEN Rong, OU Yi, FENG Hutian.Effects of pre-tightening force on vibration characteristics of roller linear guides［J］. Modular Machine Tool & Automatic Manufacturing Technology,2018(3):11-18.
［14］马洪君,宋现春，姜洪奎，等. 基于小波分析的滚柱直线导轨副摩擦力波动分析［J］.组合机床与自动化加工技术,2016(9):27-31.
MA Hongjun,SONG Xianchun,JIANG Hongkui, et al. Friction force fluctuation analysis of roller type linear guideways based on wavelet analysis［J］. Modular Machine Tool ＆ Automatic Manufacturing Technique, 2016(9):27-31.
［15］姜洪奎,宋现春,许向荣,等.考虑径向间隙的非理想双圆弧滚道滚珠丝杠副接触角建模和分析［J］.振动与冲击,2019,38(20):181-187.
JIANG Hongkui,SONG Xianchun,XU Xiangrong, et al. Modeling the elastic contact angle of preloaded ball screw pair with non-ideal double-arc raceway considering radial clearance［J］. Journal of Vibration and Shock, 2019,38(20):181-187.