针对液压系统中阀口空化后的气泡进入液压缸对液压缸表面造成气蚀以及对液压系统造成振动、噪声、不稳定等问题，以滚切剪液压系统为例，以液压油有效体积模量为桥梁，建立了阀口初始含气量和气泡运动距离之间的数学模型。通过不同的液压阀口后的初始含气量，得到孔道中气泡运动的最佳溶解距离，从而使更少的气体进入液压缸，并用Fluent进行仿真验证。研究表明：随着初始含气量的变化，孔内气体溶解的距离也在发生变化；并且分析发现数学模型和仿真模型误差在10%以下。该模型的研究有助于防止空化后更多的气泡进入液压缸，防止液压缸造成气蚀及密封装置出现断裂等问题，更有提高液压系统的稳定性。
Abstract
In order to explore the cavitation phenomenon on the surface of a hydraulic cylinder and the instability of a hydraulic system caused by air bubbles entering into the hydraulic cylinder through pipelines after the cavitation at valve mouth, an effective volume modulus of hydraulic oil was taken as a bridge and a mathematical model was established to analyse the relationship between the initial air content at valve mouth and the distance of air bubbles movement.The travel length of the bubble movement in the channel was obtained according to the initial gas content after the gas passing through different hydraulic valve ports.The simulation was verified by using the software Fluent.The results show that as the initial gas content changes, the distance of gas dissolution in the pores also changes.It is found that the error caused by the mathematical model and the simulation model is less than 10%.The study of this model is helpful to prevent more air bubbles from entering the hydraulic cylinder after cavitation, and is benefitial to avoid causing cavitation in the hydraulic cylinder and breaking of the sealing device.It is more conducive to improve the stability of the hydraulic system.
关键词
液压系统 /
含气量 /
距离
{{custom_keyword}} /
Key words
hydraulic system /
gas content /
distance
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] Ali V A. Effect of Bulk Modulus on Performance of a
Hydrostatic Transmission Control System[J].Sadhana,2006,31(5):543–556.
[2] SHEN W, Huang H, Li Y, et al. Work characteristic analysis
of single-rod symmetric cylinders[J]. HighTechnology Letters, 2017,23(3): 286-292.
[3] SHEN W, Huang H, Pang Y, et al. Review of the Energy
Saving Hydraulic System Based on Common Pressure Rail[J]. IEEE Access, 2017, 5: 655-669.
[4] HAN H Y Li H Z, Li J, et al. Analyzing Nonlinear System
Stability of a New Hydraulic Bilateral Rolling Shear[J].
IsijInternational,2016,56(10):1789-1795．
[5]HAN H Y, WANG J, HUANG Q X. Analysis of unsymmetrical valve controlling unsymmetrical cylinder stability in hydraulic leveler. Non- liner Dynam, 2012, 70(2): 1199 – 1203.
[6]安晨亮,马金玉,张青松,权凌霄.液压管路振动功率流传递路径分析[J].噪声与振动控制,2018,38(06):30-36.
AN Chenliang , MA Jinyu , ZHANG Qingsong , Quan Lingxiao. Analysis of Transmission Path of Vibration Power Flow in Hydraulic Pipeline[J].NOISE AND VIBRATION CONTROL,2018,38(06):30-36.
[7]Quan Lingxiao,Guo Meng,Shi Junqiang,Jiao Zongxia,Guo Changhong.Friction coupling vibration characteristics analysis of aviation hydraulic pipelines considering multi factors[J].High Technology Letters,2018,24(02):180-188.
[8]王静,龚国芳,杨华勇.油液体积弹性模量的研究与在线
量[J].机械工程学报.2009.45(7):120-125.
WANG Jing, GONG Guofang,YANG Huayong.Research and Online Measurement of Oil Bulk Modulus[J]. JOURNAL OF MECHANICAL ENGINEERING .2009.45(7):120-125.
[9] 冯斌,龚国芳,杨华勇. 液压油弹性模量提高方法与试验[J]农业机械学报.2010.41(3):219-223.
FENG Bin,GONG Guofang,YANG Huayong.Method and Experiment for Increasing Effective Fluid Bulk Modulus in Hydraulic Systems[J].Transactions of the Chinese Society for Agricultural Machinery.2010.41(3):219-223.
[10] 陈超，龚国芳，杨华勇.液压油体积弹性模量综合测试
验台的设计及研究[J].液压与气动，2008(11):21-24.
CHEN Chao. GONG Guofang,YANG Huayong. Study and Design of Integrated Test Rig for Hydraulic Oil Bulk Modulus[J]Chinese Hydraulics & Pneumatics.2008(11):21-24.
[11] 唐东林,吴凡，贾品元等.含气油液有效体积弹性模量理
模型研究[J].中国机械工程，2017,28(2):300-304.
TANG Donglin,WU Fan,JIA Pinyuan,ZENG Zhichun.Research on Theoretical Model for Effective Buik Modulus of Air—liquid Mixtures of Hydraulic Oil.CHINA MECHANICAL ENGINEERING.2017,28(2):300-304.
[12] 徐巨华.油液体积弹性模量对系统动态特性影响仿真研
究[D]浙江:浙江大学硕士学位论文.2013.
XU Juhua. Simulation study on the influence of oil bulk elastic modulus on system dynamic characteristics[D] Zhejiang: Master's Degree Thesis of Zhejiang University. 2013.
[13]杜学文.液压阀口空化机理及对系统的影响[D].浙江:浙江大学博士学位论文.2008.
DU Xuewen. Cavitation Mechanism of Hydraulic Valve Port and Its Impact on the System[D].Zhejiang: Doctoral Dissertation of Zhejiang University. 2008.
[14] David Bach,Jan Hauke Harmening,Matthias Hofer,Tom
Masselter,Thomas Speck. Separation of Entrained Air Bubbles From Oil in the Intake Socket of a Pump Using Oleophilic and Oleophobic Woven and Nonwoven Fabrics[J].Journal of Fluids Engineering.2018,140(3): 1301-1316.
[15] Junjie Zhou ,Andrea Vacca,Bernhard Manhartsgruber.A
Novel Approach for the Prediction of Dynamic Features of Air Release and Absorption in Hydraulic Oils[J].Journal of Fluids Engineering.2013,135(9):1305-1312.
[16] Yutaka T, Sayako S, Hiroyuki G. Experimental
investigation of effective bulk modulus of oil with entrained air bubbles[C],In:The 12th International Conference on Motion and Vibration
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(1197 KB)
