基于MCKD和改进IESFOgram相结合的行星轴承外圈故障诊断

陈鑫,郭瑜,伍星,樊家伟,林云

振动与冲击 ›› 2021, Vol. 40 ›› Issue (20) : 200-206.

PDF(2196 KB)
PDF(2196 KB)
振动与冲击 ›› 2021, Vol. 40 ›› Issue (20) : 200-206.
论文

基于MCKD和改进IESFOgram相结合的行星轴承外圈故障诊断

  • 陈鑫,郭瑜,伍星,樊家伟,林云
作者信息 +

Planet bearing outer-race fault diagnosis based on MCKD and improved IESFOgram

  • CHEN Xin,GUO Yu,WU Xing,FAN Jiawei,LIN Yun
Author information +
文章历史 +

摘要

针对行星齿轮箱中振动信号传递路径具有时变性和信号间相互耦合的问题,提出了基于最大相关峭度反卷积消噪技术(maximum correlated kurtosis deconvolution,MCKD)和特征优化图改进包络谱(improved envelope spectrum via feature optimisation-gram,IESFOgram)相结合的行星轴承外圈故障诊断方法。该方法使用MCKD技术对信号进行降噪处理,增强与行星轴承故障相关分量的能量幅值;采用改进IESFOgram提取轴承故障振动分量,再基于特征频率各阶次谐波频率与边带积分比值之和最大确定包含轴承故障信息最丰富的优化解调频带;最后包络谱分析辨识故障特征。通过对行星轴承外圈的实测数据分析,验证了所提方法的有效性。

Abstract

In order to solve the problems that the vibration signal transmission path in the planetary gearboxes has time-varying and mutual coupling of vibration signals, a fault feature extraction method of planet bearing outer-race based on the maximum correlation kurtosis deconvolution (MCKD) and improved envelope spectrum via feature optimisation-gram (IESFOgram) were proposed.Firstly, the MCKD was used to suppress the interference of background noise and components outside the filtering band, and enhance the signal to noise ratio (SNR) of the component related to the planet bearing outer-race fault.Then, the planet bearing outer-race fault component could be extracted by the IESFOgram, and the optimal demodulation frequency could be determined based on the maximum value of sum of each order harmonic frequency of the characteristic frequency and the sideband integration ratio.Finally, fault features were extracted by envelope spectrum analysis.By analyzing measured signals of a planet bearing outer-race fault, it was proved that this method can effectively extract fault features of planet bearings.

关键词

行星轴承 / 行星齿轮箱 / 最大相关峭度反卷积 / 特征优化图

Key words

planet bearings / deconvolution of maximum correlation kurtosis / IESFOgram

引用本文

导出引用
陈鑫,郭瑜,伍星,樊家伟,林云. 基于MCKD和改进IESFOgram相结合的行星轴承外圈故障诊断[J]. 振动与冲击, 2021, 40(20): 200-206
CHEN Xin,GUO Yu,WU Xing,FAN Jiawei,LIN Yun. Planet bearing outer-race fault diagnosis based on MCKD and improved IESFOgram[J]. Journal of Vibration and Shock, 2021, 40(20): 200-206

参考文献

[1]郭瑜, 郑华文, 高艳,等.基于谱峭度的滚动轴承包络分析[J].振动、测试与诊断, 2011(4):517-521.
GUO Yu, ZHENG Huawen, GAO Yan, et al.Envelope analysis of rolling bearing based on spectral kurtosis [J].Vibration.Test and Diagnosis, 2011(4): 517-521.
[2]ANTONI J. Fast computation of the kurtogram for the detection of transient faults[J].Mechanical Systems & Signal Processing, 2007, 21(1): 108-124.
[3]李红贤, 汤宝平, 韩延,等.基于增强熵权峭度图的滚动轴承最优频带解调的故障诊断[J].振动与冲击, 2019, 38(17):24-31.
LI Hongxian, TANG Baoping, HAN Yan, et al.Fault diagnosis of optimal frequency band demodulation of rolling bearings based on enhanced entropy weight kurtosis graph [J].Journal of vibration and Shock, 2019, 38(17): 24-31.
[4]ANTONI J. The infogram: Entropic evidence of the signature of repetitive transients [J].Mechanical Systems and Signal Processing, 2016, 74:73-94.
[5]ANTONI J, XIN G, HAMZAOUI N.Fast computation of the spectral correlation [J].Mechanical Systems and Signal Processing, 2017, 92: 248-277.
[6]BORGHESANI P, ANTONI J.A faster algorithm for the calculation of the fast spectral correlation [J].Mechanical Systems and Signal Processing, 2018, 111:113-118.
[7]WANG D, ZHAO X, KOU L L, et al.A simple and fast guideline for generating enhanced/squared envelope spectra from spectral coherence for bearing fault diagnosis [J].Mechanical Systems and Signal Processing, 2019, 122:754-768.
[8]MAURICIO A M R, QI J, SMITH W A, et al.Bearing diagnostics under strong electromagnetic interference based on Integrated Spectral Coherence[J].Mechanical Systems and Signal Processing, 2020, 140:106673.
[9]ALEXANDRE M.Improved Envelope Spectrum via Feature Optimisation-gram (IESFOgram): A novel tool for rolling element bearing diagnostics under non-stationary operating conditions [J].Mechanical Systems and Signal Processing, 2020,144: 106891.
[10]RANDALL R B, ANTONI J.Rolling element bearing diagnostics—A tutorial [J].Mechanical Systems and Signal Processing, 2011, 25(2):485-520.
[11]MCDONALD G L, ZHAO Q, ZUO M J.Maximum correlated Kurtosis deconvolution and application on gear tooth chip fault detection [J].Mechanical Systems and Signal Processing, 2012, 33: 237-255.
[12]刘尚坤, 唐贵基, 何玉灵,等.Teager能量算子结合MCKD的滚动轴承早期故障识别[J].振动与冲击, 2016, 35(15):98-102.
LIU Shangkun, TANG Guiji, HE Yuling, et al.Early fault identification of rolling bearing with Teager energy operator combined with MCKD[J].Journal of Vibration and Shock, 2016, 35(15): 98-102.
[13]郭瑜, 秦树人, 汤宝平,等.基于瞬时频率估计的旋转机械阶比跟踪[J].机械工程学报, 2003, 39(3):32-36.
GUO Yu, QIN Shuren, TANG Baoping, et al.Order tracking of rotating machinery based on instantaneous frequency estimation [J].Journal of Mechanical Engineering, 2003, 39(3): 32-36.

PDF(2196 KB)

Accesses

Citation

Detail

段落导航
相关文章

/