内环向加筋对功能梯度圆柱壳模态频率的影响

PDF(1698 KB)

振动与冲击 ›› 2021, Vol. 40 ›› Issue (24) : 255-262.

论文

刘超，刘文光，吕志鹏

作者信息 +

Effects of inner ring-stiffener on modal frequencies of a functionally graded cylindrical shell

LIU Chao, LIU Wenguang, LYU Zhipeng

Author information +

文章历史 +

摘要

研究了内环向加筋功能梯度(functionally graded materials ,FGMs)圆柱壳的模态频率。首先，运用Mori-Tanaka模型建立了分离式和整体式加筋FGMs圆柱壳的材料属性。然后，基于三阶剪切变形理论推导了加筋FGMs圆柱壳自由振动的能量模型。在此基础上，结合圆柱壳的最小势能原理与Rayleigh-Ritz法，推导了加筋FGMs圆柱壳的模态频率方程，通过算例验证了模型的正确性和有效性。最后，探讨了加筋设计方式、加筋数量和加筋位置对圆柱壳模态频率的影响。结果表明：分离式加筋对温度的敏感性更弱，但有利于提高圆柱壳的模态频率；加筋数目对圆柱壳模态频率的影响具有收敛性；加筋的非均匀位置参数与圆柱壳几何参数存在相互匹配关系，对圆柱壳模态频率的影响较为复杂；加筋截面高度相比截面宽度，对圆柱壳模态频率更为敏感。

Abstract

The modal frequencies of an inner ring-stiffened cylindrical shell made of functionally graded materials (FGMs) were studied in this article. Firstly, the Mori-Tanaka model was employed to obtain the material properties of the separated and integrated stiffened FGMs cylindrical shell. Thereafter, the energy model due to free vibration of the inner ring stiffened FGMs cylindrical shell was derived based the third-order shear deformation theory. Subsequently, the principle of minimum potential energy of the cylindrical shell and the Rayleigh-Ritz method were used to derive the modal frequency equation of the inner ring stiffened FGMs cylindrical shell. And the validity of the derived frequency model was verified by case studies. Lastly, the effects of the design method, the number of stiffeners, and the stiffener location of the cylindrical shell were discussed. Results indicate that the separated stiffeners are less sensitive to temperature, but are more advantage to increase the modal frequencies of a cylindrical shell. The effects of stiffener numbers on the modal frequencies of a cylindrical shell are convergence. There is a matching relationship between the non-uniform position parameters of the stiffener and the geometric parameters of a cylindrical shell. The effects on the modal frequencies of a cylindrical shell are more complicated. The height of the stiffened section is more sensitive to the modal frequencies of a cylindrical shell than the width of the section.

导出引用

刘超，刘文光，吕志鹏. 内环向加筋对功能梯度圆柱壳模态频率的影响[J]. 振动与冲击, 2021, 40(24): 255-262

LIU Chao, LIU Wenguang, LYU Zhipeng. Effects of inner ring-stiffener on modal frequencies of a functionally graded cylindrical shell[J]. Journal of Vibration and Shock, 2021, 40(24): 255-262

参考文献

[1] LOY C T, LAM K Y, REDDY J N. Vibration of functionally graded cylindrical shells[J]. International Journal of Mechanical Sciences, 1999, 41(3): 309-324.
[2] ABDUL G S, TAHIR M, MUHAMMAD N N. Vibrations of FGM thin cylindrical shells with exponential volume fraction law[J]. Applied Mathematics and Mechanics, 2009, 30(05): 607-615.
[3] 刘文光, 舒斌, 郭隆清, 等. 热环境对FGM壳模态频率的影响[J]. 振动与冲击, 2017, 036(004): 127-131,163.
LIU Wenguang, SHU Bin, GUO Longqing, et al. Impacts of thermal environment on modal frequency of FGM shells[J]. Journal of Vibration and shock, 2017, 036(004): 127-131,163.
[4] 叶曦, 孙永华, 刘见华, 等. 热环境下功能梯度圆柱壳的频散特性[J]. 船舶力学, 2015,19(04): 411-419.
YE Xi, SUN Yonghua, LIU Jianhua, et al. Dispersion characteristics of functionally graded material cylindrical shells in the thermal environment[J]. Journal of Ship Mechanics, 2015, 19(04): 411-419.
[5] QIN Z Y, CHU F L, ZU J. Free vibrations of cylindrical shells with arbitrary boundary conditions: a Comparison study, International Journal of Mechanical Sciences, 2017, 133: 91-99.
[6] HASHEMI S, ILKHANI M R, FADAEE M. Accurate natural frequencies and critical speeds of a rotating functionally graded moderately thick cylindrical shell[J]. International Journal of Mechanical Sciences, 2013, 76: 9-20.
[7] 杜长城, 李映辉. 功能梯度圆柱壳非线性振动中的模态相互作用[J]. 振动工程学报, 2013, 26(05): 647-653.
DU Changcheng, LI Yinghui. Mode interaction in nonlinear vibration of functionally graded cylindrical shells[J]. Journal of Vibration Engineering, 2013, 26(05): 647-653.
[8] HADI A, OVESY H R, SHAKHESI S, et al. Large amplitude dynamic analysis of FGM cylindrical shells on nonlinear elastic foundation under thermomechanical loads[J]. International Journal of Applied Mechanics, 2017, 09(07): 1750105-1-1750105-34.
[9] 梁斌, 陈金晓, 李戎, 等. 水下环肋功能梯度材料圆柱壳稳定性研究[J]. 振动与冲击, 2017, 36(13): 80-85+121.
LIANG Bin, CHEN Jinxiao, LI Rong, et al. Stability of a submerged ring-stiffened FGM cylindrical shell[J]. Journal of Vibration and shock, 2017, 36(13): 80-85+121.
[10] LIU T, WANG A L, WANG Q S, et al. Wave based method for free vibration characteristics of functionally graded cylindrical shells with arbitrary boundary conditions [J]. Thin-Walled Structures, 2020, 148, 1-19.
[11] FARAHANI H, BARATI F. Vibration of sumberged functionally graded cylindrical shell based on first order shear deformation theory using wave propagation method[J]. Structural Engineering and Mechanics, 2015, 53(3): 575-587.
[12] 蒲育, 滕兆春. 基于一阶剪切变形理论FGM梁自由振动的改进型GDQ法求解[J]. 振动与冲击, 2018, 37(16): 212-218. PU Yu, TENG Zhaochun. Free vibration of FGM beams based on the first-order shear deformation theory by a modified generalized differential quadrature method[J]. Journal of Vibration and shock, 2018, 37(16): 212-218.
[13] PUNERA D, KANT T. Free vibration of functionally graded open cylindrical shells based on several refined higher order displacement models[J]. Thin-Walled Structures, 2017, 119: 707-726.
[14] SONG Z G, ZHANG L W, LIEW K M. Vibration analysis of CNT-reinforced functionally graded composite cylindrical shells in thermal environments[J]. International Journal of Mechanical Sciences, 2016, 115-116.
[15] 郝育新, 张伟. 四边简支FGM矩形板非线性振动中的内共振[J]. 振动与冲击, 2009, 28(06): 153-154+187+201-202.
HAO Yuxin, ZHANG Wei. Nonlinear vibration of functionally graded material plate under different internal resonances[J]. Journal of Vibration and shock, 2009, 28(06): 153-154+187+ 201-202.
[16] DAO V D, VU H N. An analytical approach to analyze nonlinear dynamic response of eccentrically stiffened functionally graded circular cylindrical shells subjected to time dependent axial compression and external pressure. Part 2: Numerical results and discussion[J]. Vietnam Journal of Mechanics, 2014, 36(3): 201-214.
[17] PHUONG N T, NAM V H, TRUNG N T, et al. Nonlinear stability of sandwich functionally graded cylindrical shells with stiffeners under axial compression in thermal environment[J]. International Journal of Structural Stability and Dynamics, 2019, 19(07): 1950073-1-1950073-28.
[18] SHENG G G, WANG X. The dynamic stability and nonlinear vibration analysis of stiffened functionally graded cylindrical shells[J]. Applied Mathematical Modelling, 2017, 56: 389-403.
[19] NATARJAN S, BAIZ P M, GANAPATHI M, et al. Linear free flexural vibration of cracked functionally graded plates in thermal environment[J]. Computers and Structures, 2011, 89(15-16): 1535-1546.
[20] SHEN H S. Nonlinear vibration of shear deformable FGM cylindrical shells surrounded by an elastic medium[J]. Composite Structures, 2012, 94(3): 1144-1154.
[21] NAJAFIZADEH M M, ISVANDZIBAEI M R. Vibration of functionally graded cylindrical shells based on higher order shear deformation plate theory with ring support[J]. Acta Mechanica, 2007, 191(1-2): 75-91.
[22] DUNG D V, THIEM H T. Mechanical and thermal postbuckling of FGM thick circular cylindrical shells reinforced by FGM stiffener system using higher-order shear deformation theory[J]. Applied Mathematics and Mechanics, 2017, 38(01): 73-98.
[23] SHENG G G, WANG X. Effects of thermal loading on the buckling and vibration of ring-stiffened functionally graded shell[J]. Journal of Thermal Stresses, 2007, 30(12): 1249-1267.
[24] NAJAFIZADEH M M, ISVANDZIBAEI M R. Vibration of functionally graded cylindrical shells based on different shear deformation shell theories with ring support under various boundary conditions[J]. Journal of Mechanical Science and Technology, 2009, 23(8): 2072-2084.
[25] WANG C M, SWADDIWUDHIPONG S, TIAN J. Ritz method for vibration analysis of cylindrical shells with ring stiffeners[J]. Journal of Engineering Mechanics, 1997, 123(2): 134-142.