弯扭耦合层合板模态特性数值模拟与试验研究

PDF(2757 KB)

振动与冲击 ›› 2021, Vol. 40 ›› Issue (8) : 194-200.

论文

张颖1,2,安利强1，周邢银1,王璋奇1

作者信息 +

Modal test and numerical analysis of a bending-torsion coupling laminate plate

ZHANG Ying1,2,AN Liqiang1,ZHOU Xingyin1,WANG Zhangqi1

Author information +

文章历史 +

摘要

通过不同位置采用对称偏轴铺设纤维实现层合板的弯扭耦合，利用模态试验和有限元数值模拟研究弯扭耦合层合板的振动模态特性。采用单点拾振的方法采集层合板振动数据，分析其固有频率和振型参数，研究不同耦合区域层合悬臂板的模态节线位置，并且与有限元模拟结果进行对比。提出采用模态置信因子（MAC）定量描述层合板的弯扭耦合性能的方法，实现了采用模态特性研究层合板的弯扭耦合效应。结果表明，层合板的耦合效应，在低阶模态时中部耦合板显著，而高阶模态时端部耦合板显著。

Abstract

The bending-torsion coupling of laminate plates was analyzed from the modal analysis point view，symmetric off-axis orientations in different location were proposed to perform the coupling feature. The frequency and mode shapes were studied experimentally and numerically. The multi-point excitation and single point measurement method was used to acquire the vibration data of the laminates, and analyze the natural frequency and vibration mode parameters. The nodal lines of laminated cantilever plates in different coupling regions were studied, and compared with finite element simulation results. A new method was proposed to quantitatively describe the bending-torsional coupling performance of laminates using modal confidence factor moal assurance criterion(MAC). The results show that the coupling effect of the centrally coupled laminates is significant at low-order vibrations, while the coupling effect of the end-coupled laminates is significant at higher-order modes.

导出引用

张颖1,2,安利强1，周邢银1,王璋奇1. 弯扭耦合层合板模态特性数值模拟与试验研究[J]. 振动与冲击, 2021, 40(8): 194-200

ZHANG Ying1,2,AN Liqiang1,ZHOU Xingyin1,WANG Zhangqi1. Modal test and numerical analysis of a bending-torsion coupling laminate plate[J]. Journal of Vibration and Shock, 2021, 40(8): 194-200

参考文献

［1］BOTTASSO C L, CAMPAGNOLO F, CROCE A, et al. Optimization-based study of bend-twist coupled rotor blades for passive and integrated passive/active load alleviation［J］. Wind Energy, 2013,16:1149-1166.
［2］杨阳，曾攀，雷丽萍.大型水平轴风力机新型叶片结构设计思想和研究进展［J］.工程力学，2019，36（10）：298-303.
YANG Yang, ZENG Pan, LEI Liping. Concept and development of novel blade structure of large horizontal axis wind turbine［J］. Engineering Mechanics,2019,36(10):298-303.
［3］刘建良，梅志远，唐宇航，等.典型复合材料板振动特性综合对比分析及设计规律研究［J］.振动与冲击，2019，38（15）：65-72.
LIU Jianliang, MEI Zhiyuan,TANG Yuhang, et al. Comprehensive comparative analysis for vibration characteristics of several typical composite panels and their design law［J］. Journal of Vibration and Shock, 2019，38（15）：65-72.
［4］BERNARD L, MICHON G, FATMI R E, et al. Static and dynamic analysis of bending-torsion coupling of a CFRP sandwich beam［J］. Composite Structures, 2016,145：26-36.
［5］毛崎波，韩伟.弯扭耦合刚度对薄壁梁弯扭耦合振动的影响研究［J］.应用力学学报，2018，35（2）：298-303.
MAO Qibo, HAN Wei. Coupled bending-torsion vibration analysis of thin-walled beams including bending-torsion rigidity effect［J］.Chinese Journal of Applied Mechanics, 2018,35（2）：298-303.
［6］刘建英，王效岳，宫金良.考虑不同边界条件悬臂梁的模态研究［J］.振动与冲击，2017，36（19）：221-226.
LIU Jianying, WANG Xiaoyue, GONG Jinliang. Modal analysis of cantilever beams with different boundary conditions［J］. Journal of Vibration and Shock, 2017，36（19）：221-226.
［7］曾军才，王久法，姚望.正交各向异性矩形板的自由振动特性分析［J］.振动与冲击，2015，34（24）：123-127.
ZENG Juncai, WANG Jiufa, YAO Wang. Free vibration characteristics of orthotropic rectangular plates［J］. Journal of Vibration and Shock,2015，34（24）：123-127.
［8］赵龙胜，宋福英.复合材料层合板振动特性的模态实验研究［J］.材料导报，2015,29(1):98-101.
ZHAO Longsheng，SONG Fuying. Modal experiment study of vibration characteristics of composite laminated plate［J］.Materials Review,2015,29(1):98-101.
［9］SHAAT M, AIDI B, CASE S W, et al. Predictions of the frequencies of bending-torsion coupled laminated composite plates with discontinuities: novel analytical modeling and experimental validation［J］.Composite Structures,2017,180:334-350.
［10］YOO H H, PIERRE C. Modal characteristic of a rotating rectangular cantilever plate［J］. Journal of Sound and Vibration,2003,259(1): 81-96.
［11］ZHAO J, TIAN Q, HU H Y. Modal analysis of a rotating thin plate via absolute nodal coordinate formulation［J］. Journal of Computational and Nonlinear Dynamics,2011,6(4):041013.
［12］周邢银，安利强，王璋奇.对称非均匀层合板梁的弯扭耦合效应［J］.复合材料学报，2017，34（7）：1462-1468.
ZHOU Xingyin, AN Liqiang, WANG Zhangqi. Bend-twist coupling effect of symmetric un-uniform laminate plate beam［J］.Acta Materiae Composite Sinica, 2017，34（7）：1462-1468.
［13］ALLEMANG R J. The modal assurance criterion (MAC): twenty years of use and abuse［J］. Sound and Vibration，2003，37（8）：14-21.