民用建筑中广泛使用的砌体填充墙在爆炸荷载作用下产生的碎块严重威胁着建筑物内部人员和设备的安全。尤其是近区爆炸作用下，墙体会产生更为严重的局部破坏，碎片飞散速度更快，但已有的相关研究工作仍旧较少。基于已有普通黏土烧结砖填充墙的近区爆炸试验，开展了近区爆炸作用下砌体填充墙损伤破坏和动态响应的数值模拟，对比验证了Load Blast法、任意拉格朗日欧拉 (Arbitrary Lagrange-Eulerian, ALE) 法和冲量法模拟近区爆炸荷载作用、预测墙体损伤破坏和动态响应的适用性。通过冲量法进一步讨论了相同比例距离下的爆炸距离、砌块砂浆界面黏结强度以及砌块材料模型的影响。结果表明：近区爆炸中，相同比例距离下，墙体损伤通常随爆炸距离增加而加剧，由局部破坏向整体坍塌破坏模式发展；墙体的抗爆性能随砌块砂浆黏结强度增强而得到强化，主要受剪切失效应力控制；MAT_BRITTLE_DAMAGE和MAT_WINFRITH_CONCRETE模型较MAT_SOIL_AND_FOAM模型预测效果更好。
Abstract
Under action of explosion load, masonry infilled wall widely used in civil structures can generate fragments to seriously threaten safety of people and equipment inside buildings, especially, under near zone explosion, wall body can cause more serious local damage, and debris can fly faster, but the existing research work is still less.Here, based on near-field explosion tests of ordinary clay fired brick infilled wall, the numerical simulation of damage and dynamic response of masonry infilled wall under near-field explosion was performed.The applicability of the Load Blast method, the arbitrary Lagrange-Eulerian (ALE) method and the impulse method to simulate near-field explosion load and predict wall damage and dynamic response were verified contrastively.The impulse method was used to further discuss effects of explosion distance, bond strength of mortar interface and building block material model under the same proportional distance.The results showed that in near zone explosion, under the same proportional distance, wall body damage usually increases with increase in explosion distance, and develops from local failure to the overall collapse failure mode; the anti-blast performance of wall body is strengthened with increase in bond strength of block mortar, and it is mainly controlled by shear failure stress; the prediction effect of MAT_BRITTLE_DAMAGE model or MAT_WINFRITH_CONCRETE model is better than that of MAT_SOIL_AND_FOAM model.
关键词
砌体填充墙 /
近区爆炸 /
动态响应 /
数值模拟 /
比例距离
{{custom_keyword}} /
Key words
masonry infilled wall /
near zone explosion /
dynamic response /
numerical simulation /
proportional distance
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
［1］ETTOUNEY M, DIMAGGIO P, HAPIJ A.Analysis of masonry bearing walls to blast threats ［C］∥Proceeding, Structures Congress.Seattle, WA: ASCE, 2003.
［2］JOHNSON C F. Concrete masonry wall retrofit systems for blast protection ［D］.College Station, TX: Texas A & M University, 2013.
［3］ORTON S L, CHIARITO V P, MINOR J K, et al.Experimental testing of CFRP-Strengthened reinforced concrete slab elements loaded by close-in blast ［J］.Journal of Structural Engineering, 2014, 140(2): 1612-1625
［4］HENRYCH J, MAJOR R.The dynamics of explosion and its use ［M］.Amsterdam: Elsevier, 1979.
［5］VARMA R K, TOMAR C P S, PARKASH S, et al.Damage to brick masonry panel walls under high explosive detonations.Pressure vessels and piping division ［C］∥Pressure Vessels and Piping Conference.Orlando, FL, 1997.
［6］WEI X Y, STEWART M G.Model validation and parametric study on the blast response of unreinforced brick masonry walls ［J］.International Journal of Impact Engineering, 2010, 37(11): 1150-1159.
［7］范俊余, 方秦, 陈力, 等.砌体填充墙的抗爆性能［J］.爆炸与冲击， 2014, 34(1): 59-66.
FAN Junyu, FAN Qin, CHEN Li, et al.Anti-blast properties of masonry infill walls ［J］.Explosion and Shock, 2014, 34(1): 59-66.
［8］MICHALOUDIS G, GEBBEKEN N.Modeling masonry walls under far-field and contact detonations ［J］.International Journal of Impact Engineering, 2019, 123: 84-97.
［9］SHI Y C, XIONG W, LI Z X, et al.Experimental studies on the local damage and fragments of unreinforced masonry walls under close-in explosions ［J］.International Journal of Impact Engineering, 2016, 90: 122-131.
［10］DAVIDSON J S, PORTER J R, DINAN R J, et al.Explosive testing of polymer retrofit masonry walls ［J］.Journal of Performance of Constructed Facilities, 2004, 18(2): 100-106.
［11］DAVIDSON J S, FISHER J W, HAMMONS M I, et al.Failure mechanisms of polymer-reinforced concrete masonry walls subjected to blast ［J］.Structure Engineering, 2005, 131(8): 1194-1205.
［12］DAVIDSON J S, MORADI L, DINAN R J.Selection of a material model for simulating concrete masonry walls subjected to blast ［D］.Birmingham, AL: University of Alabama, 2004.
［13］DAVIDSON J S, SUDAME S, DINAN R J.Development of computational models and input sensitivity study of polymer reinforced concrete masonry walls subjected to blast ［D］.Birmingham, AL: University of Alabama, 2004.
［14］MORADI L. Resistance of membrane retrofit concrete masonry walls to lateral pressure ［D］.Birmingham, AL: University of Alabama, 2007.
［15］王军国.喷涂聚脲加固黏土砖砌体抗动载性能试验研究及数值分析［D］.合肥：中国科学技术大学, 2017.
［16］WANG J G, REN H Q, WU X Y, et al.Blast response of polymer-retrofitted masonry unit walls ［J］.Composites Part B: Engineering, 2017, 128: 174-181.
［17］LS-DYNA keyword user’s manual ［M］.Livermore, CA: Livermore Software Technology Corporation, 2014.
［18］施楚贤.砌体结构［M］.4版.北京： 中国建筑工业出版社, 2004.
［19］RIDDINGTON J R, GHAZALI M Z.Hypothesis for shear failure in masonry joints ［J］.Proceedings of the Institution of Civil Engineers, 1990, 89(1): 89-102.
［20］ATKINSON R H, AMADEI B P, SAEB S, et al.Response of masonry bed joints in direct shear ［J］.Journal of Structural Engineering, 1989, 115(9): 2276-2296.
［21］RANDERS P, BANNISTER K A.Airblast loading model for DYNA2D and DYNA3D： ARL-TR-1310［R］. ［S.l.］: Army Research Laboratory, 1997.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(4067 KB)
