基于改进粒子群算法的非对称传动主轴多目标优化

PDF(2671 KB)

振动与冲击 ›› 2022, Vol. 41 ›› Issue (2) : 130-139.

论文

张运涛1，李以农1，张志达1，罗法氿1，王成2

作者信息 +

Multi objective optimization of an asymmetric transmission spindle based on improved particle swarm optimization

ZHANG Yuntao1，LI Yinong1，ZHANG Zhida1，LUO Fajiu1，WANG Cheng2

Author information +

文章历史 +

摘要

针对某特种车辆传动系统由于结构布局限制导致的主轴两侧非等强度设计问题，综合考虑传动主轴-轴承系统内外多源激励，采用集中质量法建立系统非线性振动模型。基于所建立的模型，利用Runge-Kutta进行数值仿真求解，分析了稳态工况下系统弯扭耦合振动响应以及系统动载荷和振动能量的分布特点，得出了主轴右侧断裂的主要原因。为解决传统粒子群优化 (Particle Swarm Optimization，PSO)算法易陷于局部最优解问题，通过调整算法参数和粒子变异提出一种改进的PSO算法。然后，针对主轴断裂原因，采用改进的PSO算法，以系统的波动扭矩和扭转振动能量为优化目标，对传动主轴结构参数进行多目标优化，并利用模糊集合理论对优化得到的Pareto最优解集进行选优。仿真结果表明，优化后的主轴左右两侧趋近于等强度设计，系统的扭转振动响应达到一个最优的平衡，主轴左侧的波动扭矩虽有所增加，扭转振动能量保持不变，但出现断裂故障的右侧波动扭矩幅值下降25%左右，右侧扭转振动能量下降15%左右，优化效果明显。

Abstract

In order to solve the problem of unequal strength design on both sides of the main shaft due to the structural layout limitation of the special vehicle transmission system, the nonlinear vibration model of the system is established by using the lumped mass method considering the internal and external excitation of the main shaft bearing system. Based on the established model, Runge-Kutta is used to simulate the bending torsional coupling vibration response of the system and the distribution characteristics of dynamic load and vibration energy under steady-state conditions. The main reason for the fracture of the right side of the spindle is analyzed. In order to solve the problem that the traditional PSO(Particle Swarm Optimization) algorithm is easy to fall into the local optimal solution, an improved PSO algorithm is proposed by adjusting the algorithm parameters and particle mutation. Then, according to the reason of spindle fracture, the improved multi-objective PSO algorithm is used to optimize the structural parameters of the transmission spindle with the fluctuating torque and torsional vibration energy of the system as the optimization objectives, and the Pareto optimal solution set obtained from the optimization is optimized by using the fuzzy set theory. The simulation results show that the left and right sides of the spindle approach to the same strength design after optimization, and the torsional vibration response of the system reaches an optimal equilibrium position. Although the fluctuating torque on the left side of the spindle increases and the torsional vibration energy remains unchanged, the amplitude of the fluctuating torque on the right side decreases by about 25% and the torsional vibration energy on the right side decreases by about 15%.The optimization effect is obvious.

导出引用

张运涛1，李以农1，张志达1，罗法氿1，王成2. 基于改进粒子群算法的非对称传动主轴多目标优化[J]. 振动与冲击, 2022, 41(2): 130-139

ZHANG Yuntao1，LI Yinong1，ZHANG Zhida1，LUO Fajiu1，WANG Cheng2. Multi objective optimization of an asymmetric transmission spindle based on improved particle swarm optimization[J]. Journal of Vibration and Shock, 2022, 41(2): 130-139

参考文献

[1] M.J. Miller, Propshafts (Driveshafts), Encyclopedia of Automotive Engineering, John Wiley & Sons, Ltd, 2014.
[2] H.C. Seherr-Thoss, Graf Von, F. Schmelz, E. Aucktor, Universal Joints and Driveshafts: Analysis, Design, Applications, Springer, 2006.
[3] B.M.安东诺夫. 军用履带车辆传动装置[M]. 北京:国防工业出版社, 2014.
[4] 赵梓烨,刘海鸥,陈慧岩,徐宜.某轻型履带车辆起步工况下主离合器接合过程传动轴疲劳损伤研究[J].兵工学报,2018,39(08):1466-1472.
Zhao ziye, Liu Haiou, Chen Huiyan, Xu Yi. Research on fatigue damage of transmission shaft in the process of main clutch engagement during starting of a light tracked vehicle [J]. Acta Armamentarii, 2018,39 (08): 1466-1472.
[5] 周杰,贾云献,刘鑫,柳成成.基于疲劳寿命的履带车辆侧减速器传动轴结构优化[J].机械设计,2019,36(04):82-86.
Zhou Jie, Jia Yunxian, Liu Xin, Liu Chengcheng. Structural optimization of tracked vehicle's side-reducer drive shaft based on the fatigue-life prediction [J]. Journal of Machine Design, 2019,36 (04): 82-86.
[6] 吴镇. 优化设计中的智能方法与可视化技术研究[D]. 武汉理工大学, 2002.
[7] Huang Q, Yan X, Zhang C, et al. Coupled transverse and torsional vibrations of the marine propeller shaft with multiple impact factors[J]. Ocean Engineering, 2019, 178(APR.15):48-58.
[8] Wang W , Xu H , Xu X , et al. Enhancing the Passing Ability of Unmanned Vehicles Using a Variable-Wheelbase Driving System[J]. IEEE Access, 2019,(7):115871-115885.
[9] Hong H, Yin Y, Chen X, et al. Ontological modelling of knowledge management for human–machine integrated design of ultra-precision grinding machine[J]. Enterprise Information Systems, 2016, 10(9): 970-981.
[10] 杜官将, 李东波. 基于ANSYS的机床主轴结构优化设计[J]. 组合机床与自动化加工技术, 2011(12):22-24.
Du Guanjiang, Li Dongbo. Optimization design of the structure of machine tool spindle based on ANSYS [J].
Modular Machine Tool & Automatic Manufacturing Technique, 2011,(12): 22-24.
[11] 刘昱,赵国新.基于粒子群优化算法的无摩擦气缸结构优化[J].系统仿真学报,2018,30(09):3564-3570.
Liu Yu, Zhao Guoxin. Optimization of frictionless cylinder-structure based on PSO [J]. Journal of System Simulation, 2018 ,30(09): 3564-3570.
[12] 余胜威. MATLAB优化算法案例分析与应用.进阶篇[M]. 北京:清华大学出版社, 2015.
[13] Yi Q, Li C, Ji Q, et al. Design optimization of lathe spindle system for optimum energy efficiency[J]. Journal of Cleaner Production, 2020 (250): 119536.
[14] 朱成实, 勾延生, 李铁军,等. 基于改进PSO算法的数控机床主轴优化设计[J]. 中国机械工程, 2015, 26(20):2784-2788.
Zhu Chengshi, Gou Yansheng, Li Tiejun, et al. Optimization design of CNC machine tool spindle based on improved PSO algorithm [J]. China Mechanical Engineering, 2015, 26 (20): 2784-2788.
[15] 陈东菊,李源,查春青等.动态参数影响下液体静压主轴运动精度分析及优化[J].西安交通大学学报,2020, 54(6):90-98.
Chen Dongju, Li Yuan, Cha Chunqing, et al. Analysis and optimization of motion accuracy of hydrostatic spindle under influence of dynamic parameters [J]. Journal of Xi'an Jiaotong University, 2020, 54(6): 90-98.
[16] Zhao L H , Xing Q K , Wang J Y , et al. Failure and root cause analysis of vehicle drive shaft[J]. Engineering Failure Analysis, 2019, 99:225-234.
[17] 甄满, 孙涛, 田拥胜, 等. 滚动轴承转子系统不对中-碰摩耦合故障非线性动力学分析[J]. 振动与冲击, 2020, 39(7):140-147.
Zhen man, Sun Tao, Tian Yongsheng, et al. Nonlinear dynamics of a rotor-ball bearing system with misalignment-rubbing coupled faults [J]. Journal of Vibration and Shock, 2020, 39 (7): 140-147.
[18] 陶海亮, 潘波, 高庆,等. 具有弹性静子的碰摩转子轴承系统非线性动力特性研究[J]. 振动与冲击, 2013(15):204-209.
Tao Hailiang, pan Bo, Gao Qing, et al. Nonlinear dynamics of a rub-impact rotor supported by oil film bearings with a elastic stator [J]. Journal of Vibration and Shock, 2013 (15): 204-209.
[19] 张娅, 王维民, 姚剑飞. 双盘转子系统轴向-径向碰摩非线性动力学特性分析[J]. 振动与冲击, 2012, 31(012):141-145.
Zhang Ya, Wang Weimin, Yao Jianfei. Nonlinear dynamic behavior of a double-disk isotropic rotor system with axial and radial rub-impacts [J]. Journal of Vibration and Shock, 2012, 31 (012): 141-145.
[20] SAWALHI N, RANDALL R B. Simulating gear and bearing interactions in the presence of faults Part I. The combined gear bearing dynamic model and the simulation of localised bearing faults[J]. Mechanical Systems & Signal Processing, 2008(22):1924-1951.
[21] DICK Petersen, CARL Howard, NADER Sawalhi, et al. Analysis of bearing stiffness variations, contact forces and vibrations in radially loaded double row rolling element bearings with raceway defects[J]. Mechanical Systems and Signal Processing, 2015, 50-51:139-160.
[22] 邓四二, 贾群义, 薛进学. 滚动轴承设计原理[M]. 北京：中国标准出版社, 2014.
[23] Yang Y , Ouyang H , Wu X , et al. Bending-torsional coupled vibration of a rotor-bearing-system due to blade-casing rub in presence of non-uniform initial gap[J]. Mechanism and Machine Theory, 2019, 140:2019.
[24] Shi Y, Eberhart R. Empirical study of particle swarm optimization[A]. International Conference on Evolutionary Computation[C]. Washington, USA: IEEE,1999. 1945-1950.
[25] 陈昆弘, 刘小峰. 基于循环相关和LPSO算法的自适应MCKD方法的滚动轴承早期故障特征提取[J]. 振动与冲击, 2017, 36(022):80-85.
Chen kunhong, Liu Xiaofeng. Incipient fault diagnosis of rolling element bearing based on adaptive maximum correlated kurtosis deconvolution [J]. Journal of Vibration and Shock, 2017, 36 (022): 80-85.
[26] 刘相臣. 静力学与材料力学[M]. 重庆:重庆大学出版社, 1990.
[27] ABIDO M A. Multiobjective evolutionary algorithms for electric power dispatch problem[J]. IEEE Transactions on Evolutionary Computation，2006，10(3)：315-329.