预制装配式RC框架结构抗震性能研究

黄炜1,胡高兴2

振动与冲击 ›› 2022, Vol. 41 ›› Issue (24) : 79-87.

PDF(2832 KB)
PDF(2832 KB)
振动与冲击 ›› 2022, Vol. 41 ›› Issue (24) : 79-87.
论文

预制装配式RC框架结构抗震性能研究

  • 黄炜1,胡高兴2
作者信息 +

A study on the seismic performance of aprecast RC frame structure

  • HUANG Wei1,HU Gaoxing2
Author information +
文章历史 +

摘要

针对预制装配式RC(reinforced concrete)梁柱节点连接及震损后修复的问题,提出了一种可修复的梁柱节点连接形式。为验证其有效性和可行性,设计了一个装配式节点足尺试件并进行拟静力加载测试,并与现浇节点试件试验结果进行对比分析。结果表明:该装配式节点在承载力、延性、变形和耗能能力均显著优于现浇节点,且破坏主要集中在多缝耗能装置上,预制梁、柱构件基本处在弹性阶段,可以实现节点损伤可控以及震后快速修复的目的。在此基础上,建立装配式梁柱节点及结构的简化数值模型,通过非线性动力时程分析研究了此类装配式RC框架结构的抗震性能。研究结果表明,该装配式结构在各级水平地震作用下均表现较好,满足抗震规范设计要求,其整体抗震性能基本接近现浇结构。
关键词:装配式RC框架结构;可修复连接节点;抗震性能;耗能能力;多缝耗能装置

Abstract

Aiming at the problems of precast (bhu RC) beam-column joint connection and repair after earthquake damage, a repairable connection form of beam-column joint is proposed. In order to verify its effectiveness and feasibility, a full-scale precast joint specimen was designed and tested under quasi-static loading, and the test results were compared with those of cast-in-place joint specimen. The results show that the bearing capacity, ductility, deformation and energy dissipation capacity of the precast joint are significantly better than those of the cast-in-place joint, and the damage is mainly concentrated on the multi-slit energy dissipation device, and the precast beam and column members are basically in the elastic stage, which can realize the purpose of joint damage control and rapid repair after earthquake. On this basis, a simplified numerical model of the precast beam-column joint and structure is established, and the seismic performance of this kind of prefabricated RC frame structure is studied by nonlinear dynamic time-history analysis. The results show that the fabricated structure performs well under all levels of horizontal earthquake, meets the requirements of seismic code design, and its overall seismic performance is basically close to that of cast-in-place structure.
Keywords: Prefabricated RC frame structure; replaceable connection joint; seismic performance; energy consumption capacity; multi-slit energy dissipation device

关键词

装配式RC框架结构 / 可修复连接节点 / 抗震性能 / 耗能能力 / 多缝耗能装置

Key words

Prefabricated RC frame structure / replaceable connection joint / seismic performance / energy consumption capacity / multi-slit energy dissipation device

引用本文

导出引用
黄炜1,胡高兴2. 预制装配式RC框架结构抗震性能研究[J]. 振动与冲击, 2022, 41(24): 79-87
HUANG Wei1,HU Gaoxing2. A study on the seismic performance of aprecast RC frame structure[J]. Journal of Vibration and Shock, 2022, 41(24): 79-87

参考文献

[1] Morris A E J. Precast Concrete in Architecture [M]. London: George Godwin Limited, 1978: 2-6.
[2] 颜桂云, 黄冠骅, 滕军, 等. 装配式耗能减震节点连接中削弱型约束钢板阻尼器滞回性能试验[J]. 振动与冲击, 2021, 40(15): 98-106, 122.
YAN Guiyun, Huang Gunahua, TENG Jun, et al. Tests for hysteretic performance of weakened constrained steel-plate damper in prefabricated energy dissipation joints[J]. Journal of Vibration and Shock, 2021, 40(15): 98-106, 122.
[3] 鲁余勇, 冯云, 杨国梁, 等. 全装配式混凝土框架综述[J].工程抗震与加固改造, 2020, 42(06): 96-105, 150.
Lu Yuyong, Feng Yun, Yang Guoliang, et al. Summary of wholly precast concrete frame[J]. Earthquake Resistant Engineering and Retrofitting, 2020, 42(06): 96-105, 150.
[4] 薛伟辰.预制混凝土框架结构体系研究与应用进展[J].工业建筑,2002,32(11): 47-50.
Xue Weichen. Progress of studies and applications of precast concrete frame structure systems[J].Industrial Construction,2002,32(11): 47-50.
[5] 李春雨, 吴京, 章锦洋. 可更换耗能连接的装配式混凝土框架结构抗震性能试验研究[J]. 建筑结构学报, 2020, 1-12.
LI Chunyu, WU Jing, ZHANG Jinyang. Test on seismic performance of precast concrete frame with replaceable energy dissipating connecters[J]. Journal of Building Structures, 2020, 1-12.
[6] Negro P, Bournas D A, Molina F J. Pseudodynamic tests on a full-scale 3-storey precast concrete building: Global response[J]. Engineering Structures, 2013, 57: 594-608.
[7] 吕西林, 范力, 赵斌. 装配式预制混凝土框架结构缩尺模型拟动力试验研究[J]. 建筑结构学报, 2008, 29(4): 58-65.
LU Xilin, FAN Li, ZHAO Bin. Pseudo dynamic test on a reduced scale jointed precast concrete frame structure[J]. Journal of Building Structures, 2008, 29(4): 58-65.
[8] 李正良, 徐姝亚, 刘红军, 等. 新型装配式钢管混凝土柱-钢筋混凝土梁框撑体系振动台试验研究[J]. 土木工程学报, 2016, 49(02): 22-30.
Li Zhengliang, Xu Shuya, Liu Hongjun, et al. Shake table test on a new type of precast CFST column-RC beam braced frame structure[J]. China Civil Engineering Journal, 2016, 49(02): 22-30.
[9] 吕西林, 崔晔, 刘兢兢. 自复位钢筋混凝土框架结构振动台试验研究[J]. 建筑结构学报, 2014, 35(1): 19-26.
LU Xilin, CUI Ye, LIU Jingjing. Shaking table test of a self-centering reinforced concrete frame[J]. Journal of Building Structures, 2014, 35(1): 19-26.
[10] 柳炳康, 黄慎江, 宋满荣, 等. 预压装配式预应力混凝土框架抗震性能试验研究[J]. 土木工程学报, 2011, 44(11): 1-8.
Liu Bingkang, Huang Shenjiang, Song Manrong Wang, et al. Experimental study of seismic performance of prestressed fabricated PC frames[J]. China Civil Engineering Journal, 2011, 44(11): 1-8.
[11] 柳炳康, 宋满荣, 黄慎江, 等. 三层预压装配式预应力混凝土框架抗震性能试验研究[J]. 建筑结构学报, 2011, 32(09): 99-106.
LIU Bingkang, SONG Manrong, HUANG Shenjiang, et al. Experimental study on seismic performance of three story post-tensioned precast RC frame[J]. Journal of Building Structures, 2011, 32(09): 99-106.
[12] 姜绍飞, 祝豪, 张漳荣, 等. 震损不规则装配框剪结构损伤评估[J]. 振动与冲击, 2021, 40(15): 165-174.
JIANG Shaofei, ZHU Hao, ZHANG Zhang- rong, et al. Damage assessment of assembled frame shear wall structures with irregular seismic damage[J]. Journal of Vibration and Shock, 2021, 40(15): 165-174.
[13] Magliulo G, Fabbrocino B, Manfredi G. Seismic assessment of existing precast industrial buildings using static and dynamic nonlinear analyses[J]. Engineering Structures, 2008, 30( 9): 2580-2588.
[14] Clementi F, Scalbi A, Lenci S. Seismic performance of precast reinforced concrete buildings with dowel pin connections[J]. Journal of Building Engineering, 2016, 7: 224-238.
[15] Babic A, Dolsek M. Seismic fragility functions of industrial precast building classes[J]. Engineering Structures, 2016, 118: 357-370.
[16] Spacone E, Ciampi V, Filippou FC. Mixed formulation of nonlinear beam finite element[J]. Computers & Structures, 1996, 1(58): 71-83.
[17] Neuenhofer A., Filippou F.C. Evaluation of nonlinear frame finite-element models[J]. Journal of Structural Engineering, 1997, 7(123): 958-966.
[18] Otani S. SAKE: A Computer Program for Inelastic Response of R/C Frames to Earthquakes[R]. Champaign-Urbana: University of Illinois at Urbana-Champaign, 1974.
[19] Sivaselvan M, Reinhorn A M. Hysteretic models for deteriorating inelastic structures[J]. Journal of Engineering Mechanics, 2000, 126(6): 633-640.
[20] Takeda T, Sozen M A, Neilsen N N. Reinforced concrete response to simulated earthquakes[J]. ASCE Journal of the Structural Division, 1970, 96(ST12): 2557- 2573.
[21] Mander J B, Priestley M J N, Park R. Theoretical stress-strain model for confined concrete[J]. Journal of Structural Engineering, 1988, 114(8): 1804-1826.
[22] Menegotto M, Pinto P E. Method of analysis for cyclically loaded RC plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending[C]. Proceedings of IABSE Symposium on Resistance and Ultimate Deformability of Structures. Lisbon: [s. n.], 1973: 15-22.

PDF(2832 KB)

520

Accesses

0

Citation

Detail

段落导航
相关文章

/