随着各类型短切纤维的生产成本的降低，纤维混凝土得到大规模发展且应用领域不断扩展，为保证纤维混凝土在复杂环境的服役安全，本文分别对素混凝土（plain concrete，PC）梁与纤维长度为6-8 mm且体积掺量均为0.30%的碳纤维（carbon fiber ,CF）、玻璃纤维（glass fiber ,GF）和玄武岩纤维（basalt fiber ,BF）混凝土梁进行低速冲击试验，研究了普通混凝土梁和纤维混凝土梁的抗弯失效机理及断裂耗能。通过高速摄像机记录各试件梁的断裂破坏过程，提取并分析对比了跨中竖向位移时程曲线、加速度时程曲线及拉压应变时程曲线。详细分析了锤头冲击力和惯性力，并得到等效变形力－位移曲线，计算出各纤维混凝土梁断裂耗能。结果表明，各试件梁的破坏形态均为典型的弯曲破坏，均形成一条竖向主裂缝。GFRC梁断裂消耗的能量最多，相比于PC梁提高了88%。CFRC梁和BFRC梁消耗的能量分别相对于PC梁提高了43%和18%。本文中对不同类型纤维混凝土受弯构件在低速冲击工况下的力学性能与能量消耗方面的定量化研究结果可为纤维混凝土的工程推广应用提供参考。
Abstract
With the reduction of the production cost of various types of chopped fiber, fiber reinforced concrete has been developed on a large scale and its application fields are expanding. In order to ensure the service safety of fiber reinforced concrete in complex environment, this paper analyzes the concrete beam and carbon fiber (CF) with the fiber length of 6-8 mm and the volume content of 0.30% The low velocity impact tests of glass fiber (GF) and basalt fiber (BF) concrete beams were carried out to study the bending failure mechanism and fracture energy consumption of ordinary concrete beams and fiber reinforced concrete beams. The fracture process of each beam was recorded by high-speed camera, and the vertical displacement time history curve, acceleration time history curve and tension compression strain time history curve were extracted and analyzed. The impact force and inertia force of hammerhead were analyzed in detail, and the equivalent deformation force displacement curve was obtained, and the fracture energy consumption of each fiber reinforced concrete beam was calculated. The results show that the failure mode of each specimen is typical bending failure, and a vertical main crack is formed. The energy consumption of GFRC beam is the most, which is 88% higher than that of （plain concrete）PC beam. The energy consumption of CFRC beam and BFRC beam is 43% and 18% higher than that of PC beam, respectively. In this paper, the quantitative research results of mechanical properties and energy consumption of different types of fiber reinforced concrete flexural members under low velocity impact condition can provide reference for the engineering application of fiber reinforced concrete.
关键词
纤维混凝土梁 /
低速冲击 /
惯性力 /
断裂耗能
{{custom_keyword}} /
Key words
Fiber reinforced concrete beam /
low speed impact /
inertia force /
fracture energy dissipation
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] YOO D-Y, BANTHIA N. Impact resistance of fiber-reinforced concrete – A review[J]. Cement and Concrete Composites, 2019, 104.
[2] TUNCER E, BINICI B, CANBAY E. Behavior and design of FRP bonded autoclaved aerated concrete beams[J]. Construction and Building Materials, 2021, 282.
[3] TIAN W, QI B, LIU Y, et al. Early frost resistance and permeability properties of carbon fiber/cement-based composite cured by ohmic heating under ultra-low temperature[J]. Construction and Building Materials, 2021, 282.
[4] PHAN-VU P, TRAN D T, PHAM T M, et al. Distinguished bond behaviour of CFRP sheets in unbonded post-tensioned reinforced concrete beams versus single-lap shear tests[J]. Engineering Structures, 2021, 234.
[5] KHORRAMIAN K, SADEGHIAN P. Hybrid system of longitudinal CFRP laminates and GFRP wraps for strengthening of existing circular concrete columns[J]. Engineering Structures, 2021, 235.
[6] ZENG Y, TANG A. Comparison of effects of basalt and polyacrylonitrile fibers on toughness behaviors of lightweight aggregate concrete[J]. Construction and Building Materials, 2021, 282.
[7] SU C, WANG X, DING L, et al. Effect of carbon nanotubes and silica nanoparticles on the durability of basalt fiber reinforced polymer composites in seawater and sea sand concrete environment[J]. Polymer Composites, 2021.
[8] KIM Y J, SOLANKI M. Post-Peak crack control of concrete with BFRP grids[J]. Construction and Building Materials, 2021, 282.
[9] FU Q, XU W, LI D, et al. Dynamic compressive behaviour of hybrid basalt-polypropylene fibre-reinforced concrete under confining pressure: Experimental characterisation and strength criterion[J]. Cement and Concrete Composites, 2021, 118.
[10] YAN P, CHEN B, AFGAN S, et al. Experimental research on ductility enhancement of ultra-high performance concrete incorporation with basalt fibre, polypropylene fibre and glass fibre[J]. Construction and Building Materials, 2021, 279.
[11] KUMARI A, NAYAK A N. An experimental approach for strengthening of RC deep beams with web openings using GFRP fabrics and gas actuated fasteners[J]. Journal of Building Engineering, 2021, 35.
[12] CHINDAPRASIRT P, SUKONTASUKKUL P, TECHAPHATTHANAKON A, et al. Effect of graphene oxide on single fiber pullout behavior[J]. Construction and Building Materials, 2021, 280.
[13] BILISIK K, OZDEMIR H. Multiaxis three-dimensional (3D) glass fiber preform/cementitious matrix concrete composites: Experimental characterizations by panel test[J]. Cement and Concrete Composites, 2021, 119.
[14] 廉杰, 杨勇新, 杨萌,等. 短切玄武岩纤维增强混凝土力学性能的试验研究[J]. 工业建筑, 2007, 37(6):8-10.
LIE J, YANG Y-X, YANG M, ,et al. Experimental research on the mechanical behavior of chopped basalt fiber reinforced concrete [J]. Industrial Construction, 2007, 37(6):8-10.
[15] TABATABAEI Z S, VOLZ J S, KEENER D I, et al. Comparative impact behavior of four long carbon fiber reinforced concretes[J]. Materials & Design, 2014, 55:212-223.
[16] LIU S, ZHU D, OU Y, et al. Impact response of basalt textile reinforced concrete subjected to different velocities and temperatures[J]. Construction and Building Materials, 2018, 175:381-391.
[17] OU Y, ZHU D, ZHANG H, et al. Mechanical Characterization of the Tensile Properties of Glass Fiber and Its Reinforced Polymer (GFRP) Composite under Varying Strain Rates and Temperatures[J]. Polymers (Basel), 2016, 8(5).
[18] LIU S, ZHU D, LI G, et al. Flexural response of basalt textile reinforced concrete with pre-tension and short fibers under low-velocity impact loads[J]. Construction and Building Materials, 2018, 169:859-876.
[19] WANG C, PENG L, LI B L ,et al. Influences of molding processes and different dispersants on the dispersion of chopped carbon fibers in cement matrix[J]. Heliyon, 2018, 4(10).
[20] MILLARD S G, MOLYNEAUX T C K, BARNETT S J, et al. Dynamic enhancement of blast-resistant ultra high performance fibre-reinforced concrete under flexural and shear loading[J]. International Journal of Impact Engineering, 2010, 37(4):405-413.
[21] MAO L, BARNETT S J. Investigation of toughness of ultra high performance fibre reinforced concrete (UHPFRC) beam under impact loading[J]. International Journal of Impact Engineering, 2017, 99:26-38.
[22] BENTUR A, MINDESS S, BANTHIA N. The behaviour of concrete under impact loading:Experimental procedures and method of analysis[J]. Materials and Structures, 1986, 19:371-378.
[23] BANTHIA N, MINDESS S, BENTUR A, et al. Impact Testing of Concrete Using a Drop-weight Impact Machine[J]. Experimental Mechanics, 1989, 29:63-69.
[24] SOLEIMANI S M, BANTHIA N. A Novel Drop Weight Impact Setup for Testing Reinforced Concrete Beams[J]. Experimental Techniques, 2014, 38(3):72-79.
[25] 许斌, 曾翔. 冲击作用下钢筋混凝土深梁动力性能试验研究[J]. 振动与冲击, 2015, 34(4):6-13.
XU B, ZENG X. Tests for dynamic behaviors of deep RC beams under impact loadings[J]. Journal of Vibration and Shock, 2015, 34(4):6-13.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(2321 KB)
