新型装配式框架节点地震损伤性能研究

PDF(2734 KB)

振动与冲击 ›› 2024, Vol. 43 ›› Issue (18) : 267-277.

论文

新型装配式框架节点地震损伤性能研究

董静1，白宇航1，刘云贺1，丛潇然1，申长岭2

作者信息 +

Seismic damage performance of a new type of prefabricated frame joints

DONG Jing1, BAI Yuhang1, LIU Yunhe1, CONG Xiaoran1, SHEN Changling2

Author information +

文章历史 +

摘要

梁柱节点的构造型式对框架结构的力学性能影响显著，本文设计了一种新型装配式框架节点，为研究新型装配式框架节点的地震损伤性能，以连接方式和轴压比为设计参数，设计制作了8个节点试件进行低周循环试验，结合VIC-3D技术监测试件柱端表面应变，观察其破坏模式，分析了该节点的滞回曲线、延性和耗能能力等抗震性能指标，建立了适合于装配式节点的修正损伤模型。结果表明：新型装配式节点破坏模式为剪切破坏，主要破坏位置发生在混凝土与钢部件的连接处。装配式节点滞回曲线饱满，耗能能力强，装配式Z字形拼接节点的累积总耗能为现浇节点的1.75倍，表现出较好的抗震性能；装配式节点的延性系数在2.02-3.78之间，轴压比的增大会使节点承载力提高，延性降低。修正模型计算出的损伤发展曲线与实际情况吻合较好；连接方式的改变能够显著影响节点的损伤发展速率，轴压比越小，损伤发展速率越慢；最后，对装配式框架结构性态水平进行了参数量化，给出了性态水平与层间位移角、损伤指数、柱端表面峰值应变的对应关系，研究结果可为该类结构损伤评估及震后恢复提供理论依据。

Abstract

The construction form of beam column joints affects the mechanical performance of frame structures. This paper designs a new type of prefabricated frame joint. In order to study the seismic damage performance of the new type of prefabricated frame joint, cyclic load tests were conducted on 8 joint specimens using connection mode and axial compression ratio as design parameters. The surface strain of the specimens was monitored using VIC-3D technology. The hysteresis curve of the joint was analyzed Mechanical properties such as ductility and energy dissipation capacity. The results indicate that the failure mode of the new prefabricated joint is shear failure, with the main failure location occurring at the connection between concrete and steel components; The hysteresis curve of prefabricated joints is full, and their energy consumption capacity is strong. The cumulative total energy consumption of prefabricated Z-shaped splicing joints is 1.75 times that of cast-in-place joints; The ductility coefficient of prefabricated joints is between 2.02 and 3.78, and an increase in axial compression ratio will increase the bearing capacity of the joint, while the ductility coefficient will decrease; A modified damage model suitable for prefabricated joints has been established, and the calculated damage development curve is consistent with the actual situation. Changes in connection methods can significantly reduce the damage development rate of joints. The smaller the axial compression ratio, the slower the damage development rate; The structural state level of prefabricated frames has been quantified, and the quantitative results can provide a theoretical basis for damage assessment and post earthquake recovery of the structure.

导出引用

董静1, 白宇航1, 刘云贺1, 丛潇然1, 申长岭2. 新型装配式框架节点地震损伤性能研究[J]. 振动与冲击, 2024, 43(18): 267-277

DONG Jing1, BAI Yuhang1, LIU Yunhe1, CONG Xiaoran1, SHEN Changling2. Seismic damage performance of a new type of prefabricated frame joints[J]. Journal of Vibration and Shock, 2024, 43(18): 267-277

参考文献

[1] 黄炜, 胡高兴. 预制装配式RC框架结构抗震性能研究[J].振动与冲击, 2022, 41(24):79-87.
HUANG Wei, HU Gaoxing. A study on the seismic performance of aprecast RC frame structure[J]. Journal of Vibration and Shock, 2022,41(24):79-87.
[2]李升才, 白巨巨, 朱永甫. 装配式复合箍筋约束高强混凝土柱恢复力模型研究[J]. 振动与冲击, 2022, 41(10):205-214.
LI Shengcai, BAI Juju, ZHU Yongfu. Restoring force model of prefabricated high strength concrete columns confined by composite stirrups［J］. Journal of Vibration and Shock, 2022, 41(10):205-214.
[3] 韩春, 李青宁, 姜维山等. 装配式预应力混凝土梁与高强钢筋约束混凝土柱连接节点抗震性能试验研究[J]. 振动与冲击, 2017, 36(01):248-254.
HAN Chun, LI Qingning, JIANG Weishan, et al. Tests for aseismic behavior of prestressed fabricated precast concrete beam-column joints subjected to cyclic loading［J］. Journal of Vibration and Shock, 2017, 36(01):248-254.
[4] 赵均海, 胡壹, 张冬芳, 等. 装配式复式钢管混凝土柱-钢梁框架抗震性能试验研究[J]. 建筑结构学报, 2020, 41(08):88-96.
ZHAO Junhai, HU Yi, ZHANG Dongfang, et al. Experimental investigation on seismic performance of assembled concrete-filled double*skin steel tube-steel beam frames [J]. Journal of Building Structures, 2020, 41(08):88-96.
[5] 黄炜, 胡高兴. 可恢复预制装配式RC梁柱节点抗震性能研究[J]. 工程力学, 2022, 39(12):165-176+189.
HUANG Wei, HU Gaoxing. Seismic performance of earthquake-resilient RC beam-column joints [J]. Engineering Mechanics, 2022, 39(12):165-176+189.
[6] 杨俊芬, 陈雷, 程锦鹏, 等. 一种新型装配式梁柱节点抗震性能试验研究[J]. 工程力学, 2017, 34(12):75-86.
Yang Junfen, CHEN Lei, CHENG Jin-peng, et al. Experimental study on seismic behavior of a new type of fully assembled beam-column joints[J]. Engineering Mechanics, 2017, 34(12):75-86.
[7] 李春雨, 童超, 吴京, 等.可更换耗能连接件的装配式混凝土框架结构抗震性能试验研究［J］. 建筑结构学报, 2022, 43(01):69-76.
LI Chunyu, TONG Chao, WU Jing, et al. Experimental study on seismic performance of precast concrete frame with replaceable energy dissipation connectors [J]. Journal of Building Structures, 2022, 43(01):69-76.
[8] 赵斌, 吕西林, 刘丽珍. 全装配式预制混凝土结构梁柱组合件抗震性能试验研究[J]. 地震工程与工程振动, 2005, (01):81-87.
ZHAO Bin, LV Xinlin, LIU Lizhen. Experimental study on seismic behavior of precast concrete beam-column subassem blage with fully assembled joint[J]. Earthquake Engineering and Engineering, 2005, (01):81-87.
[9] YANG K H, SEO E A, HONG S H. Cyclic flexural tests of hybrid steel–precast concrete beams with simple connection elements[J]. Engineering Structures, 2016, 118:344-35.
[10] ERSOY U, TANKUT T. Precast Concrete Members With Welded Plate Connections Under Reversed Cyclic Loading[J]. Pci Journal, 1993, 38(4):94-100.
[11] 周凌宇, 方蛟鹏, 范进凯, 等. 全装配式组合楼板抗剪连接件受剪性能试验研究[J]. 建筑结构学报, 2023,44(12):194-205.
ZHOU Lingyu, FANG Jiaopeng, FAN Jinkai, et al. Experimental study on shear behavior of perforated steel plate shear connectors in fully prefabricated composite slabs[J]. Journal of Building Structures, 2023,44(12):194-205.
[12] Vidjeapriya R, Jaya P K. Experimental Study on Two Simple Mechanical Precast Beam-Column Connections under Reverse Cyclic Loading[J]. Journal of Performance of Constructed Facilities, 2013, 27(4):402-414.
[13] 吕西林, 范力, 赵斌. 装配式预制混凝土框架结构缩尺模型拟动力试验研究[J]. 建筑结构学报, 2008, 29(04):58-65.
LU Xilin, FAN Li, ZHAO Bin. Pseudodynamic test on a reduced scale jointed precast concrete frame structure[J]. Journal of Building Structures, 2008, 29(04):58-65.
[14] Ertas O, Ozden S, Ozturan T. Ductile Connections in Precast Concrete Moment Resisting Frames[J]. Pci Journal, 2006, 51(3):66-76.
[15] 陈丽华, 冯建东, 薛彦涛, 等. 装配式混凝土外包钢管-对拉钢筋式梁柱节点抗震性能试验研究[EB/OL].(2023-08-04) [2023-11-01].https://doi.org/10.14006/j.jzjgxb.2023.0128.
[16] JGJ101-2015. 建筑抗震试验方法规程[S]. 北京:中国建筑工业出版社,2015.
JGJ101-2015. Specification for seismic test of buildings[S]. Beijing: China Architecture & Building Press, 2015.
[17] 魏康, 员方, 董志强, 等. 基于标志点的多相机数字图像相关方法精度分析及土木工程中的应用[J]. 东南大学学报(自然科学版), 2021, 51(02):219-226.
WEI Kang, YUAN Fang, DONG Zhiqiang, et al. Precision analysis and civil application of multi-camera digital image correlation method based on encoded targets[J]. Journal of Southeast University(Natural Science Edition), 2021, 51(02):219-226.
[18] Stephens J E, Yao J T P. Damage Assessment Using Response Measurements[J]. Journal of Structural Engineering, 1987, 113(4):787-801.
[19] Banon H, Veneziano D. Seismic safety of reinforced concrete members and structures[J]. Earthquake Engineering & Structural Dynamics, 1982, 10(2):179-193.
[20] Meyer I F, Wratzig W B, Stangenberg F. Damage prediction in reinforced concrete frames under seismic actions[J]. European Earthquake Engineering, 1988,3:9-15.
[21] 范杰, 朱星, 胡桔维, 等. 基于3D-DIC的砂岩裂纹扩展及损伤监测试验研究[J]. 岩土力学, 2022, 43(04):1009-1019.
FAN Jie, ZHU Xing, HU Juwei, et al. Experimental study on crack propagation and damage monitoring of sandstone using three dimensional digital image correlation technology [J]. Rock and Soil Mechanics. 2022, 43(04):1009-1019.
[22] Park Y J, Ang H S. Mechanistic Seismic Damage Model for Reinforced Concrete[J]. Journal of Structural Engineering, 1985, 111(4):722-739.
[23] GB 50011-2010. 建筑抗震设计规范[S]. 北京：中国建筑工业出版社, 2010.
GB 50011-2010. Code for seismic design of buildings[S]. Beijing: China Architecture & Building Press, 2010.
[24] 陈宗平, 徐金俊, 薛建阳, 等. 基于变形和能量双重准则的型钢混凝土异形柱地震损伤行为研究[J]. 土木工程学报, 2015, 48(08):29-37.
CHEN Zongping, XU Jinjun, XUE Jianyang, et al. Deformation and energy-based seismic damage behavior of SRC specially shaped columns[J]. China Civil Engineering Journal. 2015, 48(08):29-37.