预张预应力-承插式预制桥墩抗震试验数值仿真

PDF(4084 KB)

振动与冲击 ›› 2024, Vol. 43 ›› Issue (2) : 254-263.

论文

贾俊峰 1，王召辉 1，许坤 1，张向阳 2，宋承哲 3

作者信息 +

Numerical simulation of seismic tests for pre-tensioned prestressing precastbridge columns with socket connection

A Junfeng1, WANG Zhaohui1, XU Kun1, ZHANG Xiangyang2, SONG Chengzhe3

Author information +

文章历史 +

摘要

为充分利用承插式桥墩施工容差大、无粘结预应力桥墩震后可自恢复的优势，同时减少现场预应力张拉施工，提出一种承插式连接和工厂预张无粘结预应力筋连接的混合连接预制拼装桥墩。采用ABAQUS软件建立了该桥墩的三维有限元模型，基于已开展拟静力试验结果验证了该数值模型的精确性，并分析了桥墩的局部损伤、滞回行为、骨架曲线、耗能能力以及预应力筋张拉力、接缝开口等行为。结果表明：本文建立的数值模型可以较好地再现拟静力结果，混合连接预制拼装桥墩力-位移曲线表现为“旗帜型”；墩顶偏移率为5%时，墩柱仅出现横向裂缝，无其他明显结构损伤；承插深度为0.4D时承台出现轻微裂缝，0.7D时承台可以提供足够的抗拔力且无明显损伤；外包钢管和钢垫板存在应力集中现象。

Abstract

In order to make full use of the advantages of large construction tolerance of socket piers and the self-resetting ability of unbonded prestressed piers after earthquakes, and reduce the on-site prestressed tensioning construction, a hybrid connection prefabricated pier connected by socket connection and factory pretensioned unbonded prestressed reinforcement is proposed. The three-dimensional finite element model of the bridge pier was established by ABAQUS software. The accuracy of the numerical model was verified based on the quasi-static test results. The local damage, hysteretic behavior, skeleton curve, energy dissipation capacity, prestressed tendon tension, joint opening and other behaviors of the bridge pier were analyzed. The results show that the numerical model established in this paper can reproduce the quasi-static results well, and the force-displacement curve of the precast pier with hybrid connection is "flag type"; When the deviation rate of pier top is 5%, only transverse cracks appear on the pier column, without other obvious structural damage; When the socket depth is 0.4D, the cap has slight cracks, and when the socket depth is 0.7D, the cap can provide sufficient uplift resistance without obvious damage; There is stress concentration in the outer steel pipe and steel backing plate.

导出引用

贾俊峰 1，王召辉 1，许坤 1，张向阳 2，宋承哲 3 . 预张预应力-承插式预制桥墩抗震试验数值仿真[J]. 振动与冲击, 2024, 43(2): 254-263

A Junfeng1, WANG Zhaohui1, XU Kun1, ZHANG Xiangyang2, SONG Chengzhe3. Numerical simulation of seismic tests for pre-tensioned prestressing precastbridge columns with socket connection[J]. Journal of Vibration and Shock, 2024, 43(2): 254-263

参考文献

[1] CAI Z K, WANG Z Y, YANG T.Y. Experimental testing and modeling of precast segmental bridge columns with hybrid normal- and high-strength steel rebars[J]. Construction and Building Materials, 2018, 166:945-955. [2] 石岩，张智超，钟正午，等.预制装配式桥墩连接类型及抗震性能研究综述[J].世界地震工程,2022,38(02):205-219. SHI Yan，ZHANG Zhi-chao，ZHONG Zheng-wu，el al. Review on connection system and seismic performance of prefabricated bridge piers [J]. World Earthquake Engineering, 2022,38(02):205-219. [3] 王景全,王震,高玉峰,等.预制桥墩体系抗震性能研究进展:新材料、新理念、新应用[J].工程力学,2019,36(03):1-23. WANG Jing-quan, WANG Zhen, GAO Yu-feng, et al. Review on aseismic behavior of precast piers: new material, new concept, and new application[J]. Engineering Mechanics, 2019,36 (03):1-23. [4] 石岩,李军,秦洪果,等.桥梁双柱式排架墩抗震性能研究进展述评[J].中国公路学报,2021,34(02):134-154. SHI Yan, LI Jun, QIN Hong-guo, et al. Review on seismic performance of bridge double-column bents[J]. China Journal of Highway and Transport, 2021,34(02):134-145. [5] HARALDSSON O S, JANES T M, EBERHARD M O,et al. Seismic Resistance of Socket Connection between Footing and Precast Column[J].Journal of Bridge Engineering, 2013,18(9):910-919. [6] MASHAL M, WHITE S, PALERMO A. Quasi-static cyclic testing of emulative cast-in-place connections for Accelerated Bridge Construction in seismic regions[J]. Bulletin of the New Zealand National Society for Earthquake Engineering, 2016, 49(3):267-282. [7] MOHEBBI A, SAIIDI M S, ITANI A. Shake Table Studies and Analysis of a Precast Two-Column Bent with Advanced Materials and Pocket Connections[J]. Journal of Bridge Engineering, 2018,23(7): 04018046. [8] ZHU Z Y, Ahmad I, Mirmiran A. Seismic Performance of Concrete-Filled FRP Tube Columns for Bridge Substructure[J]. Journal of Bridge Engineering, 2006,11(3):359-370. [9] XU Y, ZENG Z, WANG Z G, et al. Experimental studies of embedment length of precast bridge pier with socket connection to pile cap[J].Engineering Structures, 2021,233:111906. [10] CHENG Z, LIU D, LI S, et al. Performance characterization and design recommendations of socket connections for precast columns[J]. Engineering Structures, 2021,242:112537. [11] 晋智斌,陈科,陆军.预制浅承插式高强混凝土空心桥墩抗震性能试验[J].中国公路学报,2022,35(04):128-139. JIN Zhi-bin, CHEN Ke, LU Jun. Seismic Performance of Precast Hollow High-strength Concrete Bridge Columns with Shallow Socket Connection[J]. China Journal of Highway and Transport,2022,35(04):128-139. [12] 韩强,贾振雷,周雨龙,等.震后可恢复功能桥梁结构之摇摆桥梁研究综述[J].中国公路学报, 2021,34(02):118-133. HAN Qiang, JIA Zhen-lei, ZHOU Yu-long,et al. Review of seismic resilient bridge structures: rocking bridge[J]. China Journal of Highway and Transport, 2021,34(02):118-133. [13] OU Y C, WANG P H, TSAI M S, et al. Large-Scale Experimental Study of Precast Segmental Unbonded Posttensioned Concrete Bridge Columns for Seismic Regions [J]. Journal of Structural Engineering, 2010, 136(3): 255-64. [14] Ou Y C , TSAI M S , CHANG K C , et al. Cyclic behavior of precast segmental concrete bridge columns with high performance or conventional steel reinforcing bars as energy dissipation bars[J]. Earthquake Engineering & Structural Dynamics, 2010, 39(11):1181-1198. [15] GUO T, CAO Z L,XU Z K, et al. Cyclic Load Tests on Self-Centering Concrete Pier with External Dissipators and Enhanced Durability[J]. Journal of Structural Engineering, 2016, 142(1):04015088. [16] ElGAWADY M A, SHA’LAN A. Seismic Behavior of Self-Centering Precast Segmental Bridge Bents[J]. Journal of Bridge Engineering,2011,16(3):328-339. [17] 贾俊峰,魏博,欧进萍,等.外置可更换耗能器的预制拼装自复位桥墩抗震性能试验研究[J].振动与冲击,2021,40(05):154-162. JIA Jun-feng, WEI Bo, OU Jin-ping, et al. Tests for seismic performance of prefabricated self-centering bridge piers with external replaceable energy dissipator [J]. Journal of Vibration and Shock,2021,40(05):154-162. [18] 贾俊峰,赵建瑜,张强,等.后张预应力节段拼装CFST桥墩抗侧力学行为试验[J].中国公路学报,2017,30(03):236-245. JIA Jun-feng, ZHAO Jian-yu, ZHANG Qiang, et al. Experiment on Lateral Bearing Behavior of Post-tensioned Segmental CFST Bridge Pier Columns [J]. China Journal of Highway and Transport, 2017,30(03):236-245. [19] WANG Z, WANG J Q, TANG Y C, et al. Seismic behavior of precast segmental UHPC bridge columns with replaceable external cover plates and internal dissipaters[J]. Engineering Structures, 2018 ,177:540-555. [20] MANDER J B , CHENG C T . Seismic resistance of bridge piers based on damage avoidance design [J]. Technical Report NCEER, 1997, 97-0014. [21] MOHEBBI A,SAIIDI M S, ITANI AM. Shake Table Studies and Analysis of a PT-UHPC Bridge Column with Pocket Connection[J]. Journal of Structural Engineering,2018,144(4):04018021. [22] LI C, BI K M, HAO H. Seismic performances of precast segmental column under bidirectional earthquake motions: Shake table test and numerical evaluation[J]. Engineering Structures,2019, 187:314-328. [23] DAI X H, LAM D, YE N J,et al.Numerical analysis of slender elliptical concrete filled columns under axial compression[J].Thin-Walled structures, 2014,77:26-35. [24] CAI Z K, WANG Z Y, YANG T Y. Cyclic Load Tests on Precast Segmental Bridge Columns with Both Steel and Basalt FRP Reinforcement[J]. Journal of Composites for Construction, 2019,23(3):04019014. [25] 冯鹏,强翰霖,叶列平.材料、构件、结构的“屈服点”定义与讨论[J].工程力学,2017,34(03):36-46. FENG Peng, QIANG Han-lin, YE Lie-ping. Discussion and Definition on Yield Points of Materials, Members and Structures [J]. Engineering Mechanics, 2017, 34 (03):36-46.