Dynamic load fast localization and reconstruction based on the Wilson-θ explicit algorithm
ZHANG Jing1，YUAN Bo1，ZHANG Fang2
1.Helicopter Research and Development Institute, Jingdezhen 333001, China;
2.State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
Abstract：By transforming the Wilson-θ numerical algorithm into an equivalent explicit expression, a dynamic load identification method based on the Wilson-θ explicit algorithm is established. The algorithm is unconditionally stable when the appropriate parameter θ is selected, and avoids the problem that the identified results diverge seriously due to the error accumulation caused by recursive calculation in previous implicit identification algorithms. By introducing response coefficient matrix, the explicit algorithm can flexibly select response types for load identification calculation. At the same time, combined with the variable separation method, the load location information is extracted from the established model matrix, so as to reduce the times of matrix inversion and improve the efficiency of load localization. The load identification method is verified by simulation examples and experimental tests of a simply supported beam. The results show that the dynamic load fast localization and reconstruction method based on Wilson-θ explicit algorithm can effectively identify the load position and the corresponding time history. Compared with the traditional load identification method, this method has higher accuracy and faster operation efficiency.
张景1，苑博1，张方2. 基于Wilson-θ显式算法的动载荷快速定位及重建方法[J]. 振动与冲击, 2023, 42(14): 115-123.
ZHANG Jing1，YUAN Bo1，ZHANG Fang2. Dynamic load fast localization and reconstruction based on the Wilson-θ explicit algorithm. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(14): 115-123.
[1] BARTLETT F D, FLANNELLY W D.Modal verification of force determination for measuring vibration loads[J]. Journal of the American Helicopter Society, 1979, 19(4) : 10-18.
[2] STARKEY J M , MERRILL G L. On the ill-condition nature of indirect force measurement techniques[J]. International Journal of Analysis and Experimental Modal Analysis, 1989，4（3）：103-108.
[3] 张景绘,李万新. 直升机六力素识别[J]. 航空学报, 1986, 7(2): 139-147.
ZHANG Jinghui, LI Wanxin. Six-force-factor identification of helicopters[J]. Acta Aeronautica et Astronautica Sinica, 1986, 7(2): 139-147.
[4] DESANGHERE G, SNOEY R. Indirect identification of excitation forces by modal coordinate transformation[J]. Proceedings of the 3rd International Modal Analysis Conference. Florida, 1985: 685-690.
[5] KREITINGER T, LUO H L. Force identification from structural responses[J]. Proceedings of the 1987 Sem Spring Conference on Experimental Mechanics. Houston, 1987: 851-855.
[6] CHOI H G, THITE A N, THOMPSON D J. Comparison of methods for parameter selection in Tikhonov regularization with application to inverse force determination[J]. Journal of Sound and Vibration , 2007，304: 894-917.
[7] HANSEN P C. Truncated SVD solutions to discrete ill-posed problems with ill-determined numerical rank[J]. SIAM Journal on Scientific and Statistical Computing, 1990, 11（3）: 503 - 518.
[8] HANSEN P C, SEKII T, SHIBAHASHI H. The modifed truncated SVD method for regularization in general form[J]. SIAM Journal on Scientific and Statistical Computing, 1992, 13: 1142-1150.
[9] HANKE M, HANSEN P C. Regularization methods for large scale problems[J]. Surveys on Mathematics for Industry, 1993, 3: 253-315.
[10] LI Q F, LU Q H. A hierarchical Bayesian method for vibration-based time domain force reconstruction problems[J]. Journal of Sound and Vibration, 2018, 421: 190-204.
[11] LI Q F, LU Q H. Time domain force identification based on adaptive ℓq regularization[J]. Journal of Vibration and Control, 2018: 1-17.
[12] LI Q F, LU Q H. A revised time domain force identification method based on Bayesian formulation[J]. International Journal for Numerical Methods in Engineering, 2019, 118: 411-431.
[13] GAUL L, HURLEBAUS S. Identification of the impact location on a plate using wavelets[J]. Mechanical Systems and Signal Processing, 1997, 12(6): 783-795.
[14] 祝德春,张方,姜金辉. 动态载荷激励位置识别技术研究[J]. 振动与冲击, 2012, 31(1): 20-23.
ZHU Dechun, ZHANG Fang, JIANG Jinhui. Identification technology of dynamic load location[J]. Journal of Vibration and Shock, 2012, 31(1): 20-23.
[15] LI Q F, LU Q H. Impact localization and identification under a constrained optimization scheme[J]. Journal of Sound and Vibration, 2016, 366: 133-148.
[16] ALAJLOUNI S, ALBAKRI M, TARAZAGA P. Impact localization in dispersive waveguides based on energy-attenuation of waves with the traveled distance[J]. Mechanical Systems and Signal Processing, 2018, 105: 361-376.
[17] FENG W, LI Q, LU Q, et al. Time domain force localization and reconstruction based on hierarchical Bayesian method[J].Journal of Sound and Vibration, 2020, 472: 115222.
[18] FENG W, LI Q, LU Q, et al. Force localization and reconstruction based on a novel sparse Kalman filter[J]. Mechanical Systems and Signal Processing, 2020, 144: 106890.
[19] 张景，张方，姜金辉. 采用分离变量法的载荷位置识别技术研究[J]. 振动工程学报, 2021, 34(3): 584-591.
ZHANG Jing, ZHANG Fang, JIANG Jinhui. Identification of dynamic load location based on variable separation method[J]. Journal of Vibration Engineering, 2021, 34(3): 584-591.
