Analysis of the dynamic characteristics of a small caliber gun’s bullet engraving process
WANG Shaoquan1， LI Qiang1， FAN Jiangtao1， WEI Liansheng1， QU Zhensen2， XIN Chunhong2
1. School of Mechanical and Electrical Engineering，North University of China，Taiyuan 030051， China；
2. Xi’an Kunlun Industrial Group Co., Ltd.，Xi’an 710043， China
Abstract：In order to optimize forcing cone structures and analyze the dynamic characteristics of the engraving process under different forcing cone structures of a small caliber gun, established an internal ballistic equation system considering changes in projectile resistance and introduced it into finite element solution via using the vuamp subroutine to achieve the coupling calculation model of internal ballistics calculation and finite element simulation in the engraving process. The feasibility of the model was verified through simulation analysis of the full barrel motion of the projectile. Simulated and analyzed the velocity, acceleration, and resistance curves and variation patterns of the projectile during the engraving process under different forcing cone taper, rifling depth, and concave line width. The result indicates that the influence of slope chamber taper on the projectile's dynamic parameters during the extrusion process is not monotonic, while the changes in rifling depth and concave line width monotonically affect the projectile's dynamic parameters. This method can provide reference and guidance for the design and optimization of gun barrel structures and bearing band.
王少泉1，李强1，樊江涛1，卫连升1，曲振森2，辛春虹2. 某小口径火炮弹丸挤进过程动力学特性分析[J]. 振动与冲击, 2024, 43(12): 241-247.
WANG Shaoquan1， LI Qiang1， FAN Jiangtao1， WEI Liansheng1， QU Zhensen2， XIN Chunhong2. Analysis of the dynamic characteristics of a small caliber gun’s bullet engraving process. JOURNAL OF VIBRATION AND SHOCK, 2024, 43(12): 241-247.
[1] 曹万有，张文柱，王道宏. 高膛压火炮技术[M]. 北京：国防工业出版社，1989年.
[2] 孙全兆. 大口径榴弹炮弹带挤进动力学研究[D].南京理工大学，2016.
Sun Quan-zhao. Study on Dynamics of Rotating Band Engraving for Large Caliber Howitzers [D]. Nanjing University of Science and Technology, 2016.
[3] 刘 欢,刘朋科,宁变芳等.155mm火炮不同膛线结构与弹带作用力研究[J].兵器装备工程学报,2022,43(11):187-193.
Liu Huan, Liu Peng-ke;Ning Bian-fang. Study on force of different rifling structures and rotating band of 155mm artillery[J]. Journal of Ordnance Equipment Engineering, 2022, 43(11): 187-193.
[4] 郭俊行,刘 琦,丁宏民等.基于光滑粒子法的某大口径火炮不同膛线弹丸挤进过程研究[J]振动与冲击,2021,40(24):75-81.2021.24.010.
Guo Jun-xing, Liu Qi, Ding Hong-min. A study on rotating band engraving process for large caliber gun projectile with differentrifles[J].JournalofVibrationandShock,2021,40(24):75-81.2021.24.010.
[5] 蔡翘楚,杨 臻,蓝维彬等.枪管不同膛线结构参数对弹丸挤进的影响研究[J].兵器装备工程学报,2020,41(04):31-36.
Cai Qiao-chu, Yang Zhen,. Lan Wei-bin. Analysis of Influence of Different Rifling Structure Parameters on Engraving[J]. Journal of Ordnance Equipment Engineering, 2020,41(04):31-36.
[6] S U S,Adrian L Z,H A V, et al. Internal ballistics of polygonal and grooved barrels: A comparative study.[J]. Science progress,2021,104(2).
[7] 程申申,陶如意,王浩等.弹丸不同结构尼龙弹带挤进过程的阻力特性[J].兵工学报,2021,42(09):1847-1857.
Chen Shen-shen, Tao Ru-yi, Wang Hao. Dampling Characteristics of Projectile in Engraving Process of Nylon Sealing Band[J]. Acta Armamentarii, 2021,42(09):1847-1857.
[8] 李 淼,钱林方,陈龙淼.弹带挤进过程内弹道特性研究[J].振动与冲击,2016,35(23):74-79.2016.23.012.
Li Miao, Qian Lin-fang, Chen Long-miao. Interior ballistics' features during rotating band engraving process[J]. Journal of Vibration and Shock, 2016,35(23):74-79.2016.23.012.
[9] 王 兵. 大口径火炮弹带挤进动力学及系统优化研究[D].南京理工大学,2019.
[10] 钱林方．火炮弹道学［Ｍ］．北京：北京理工大学出版社，2009年.
[11] 张小兵, 金志明. 枪炮内弹道学[M]. 北京：北京理工大学出版社,2014．
Zhang Xiao-bing, Jin Zhi-Ming. Interior ballistics of guns［M］．Beijing: Beijing Institute of Technology Press，2014． ( in Chinese).
[12] Meyers M A. 材料的动力学行为[M]. 张庆明, 刘彦, 黄风雷等. 北京: 国防工业出版社, 2006.
[13] 陈帅,于存贵,李宗涛等.ABAQUS子程序UAMP的应用[J].四川兵工学报,2014,35(01):149-152.
Chen Shuai, Yu Cun-Gui, Li Zong-Tao. Application of User Subroutine UAMP of ABAQUS[J]. Journal of Sichuan Ordnance, 2014,35(01):149-152.
