钢框架平端板连接组合节点弯矩-转角关系

王文达;史艳莉;文天鹏

振动与冲击 ›› 2013, Vol. 32 ›› Issue (10) : 43-49.

PDF(1898 KB)
PDF(1898 KB)
振动与冲击 ›› 2013, Vol. 32 ›› Issue (10) : 43-49.
论文

钢框架平端板连接组合节点弯矩-转角关系

  • 王文达,史艳莉,文天鹏
作者信息 +

Moment versus Rotation Relationship for Composite Joints of Steel Frames with Flush End-plate Connections

  • WANG Wen-da, SHI Yan-li, WEN Tian-peng
Author information +
文章历史 +

摘要

端板连接节点是多高层钢框架结构体系中经常采用的梁柱连接形式,当考虑现浇钢筋混凝土楼板的作用并有足够的抗剪连接件时则形成了端板连接组合节点,楼板对组合节点承载力和刚度都有贡献。基于ABAQUS软件建立了考虑楼板组合作用影响的端板连接梁柱组合节点的三维有限元数值分析模型,并分别用有关研究者完成的无楼板钢框架端板节点及考虑楼板作用的组合节点的试验结果对理论模型进行了验证,总体上数值模拟结果和试验结果吻合良好。基于该数值模型进行了平端板连接组合节点力学性能影响因素的参数分析,探讨了楼板、柱腹板加劲肋、楼板配筋率、端板厚度、梁截面高度等参数对组合节点力学性能的影响,在此基础上对欧洲规范建议的弯矩-转角关系模型进行了必要修正,最终提出了可反映楼板作用的平端板连接组合节点弯矩-转角关系实用模型。本文模型计算结果与有限元结果吻合良好,可为进一步研究该类节点的设计方法提供参考。

Abstract

End-plate connection is one of the main type for beam to column connections of the multistory and highrise steel structures. The reinforced concrete (RC) slab contributes to the strength and stiffness of the composite connections if the composite effect between steel beam and RC slab is considered with effective shear connectors. A 3-D finite element (FE) model was developed to simulate the behavour of the composite joints with flush end-plate connection and RC slab using ABAQUS. The FE model was verified by the other researchers’ experimental results. The FE results match well with the test results in general. Parameteric studies were performed to learn the behavior of the composite joints. The RC slab, the stiffening ribs of column web, the reinforcing bar ratio of RC slab, the thinkness of end-plate and the depth of the beam were considered. A practical moment versus rotation relationship model of the composite joints with flush end-plate connection was proposed to consider the RC slab effect after some parameters of the Eurocode model were modified based on parametric studies. The curves of proposed model agree with the FE results, and the model is refered to further study for the design approach of this type of composite joints.

关键词

钢框架 / 梁柱节点 / 平端板连接 / 组合节点 / 参数分析 / 弯矩-转角关系模型

Key words

steel frame / beam to column joint / flush end-plate connection / composite joint / parametric analysis / moment versus rotation relationship model

引用本文

导出引用
王文达;史艳莉;文天鹏. 钢框架平端板连接组合节点弯矩-转角关系[J]. 振动与冲击, 2013, 32(10): 43-49
WANG Wen-da;SHI Yan-li;WEN Tian-peng. Moment versus Rotation Relationship for Composite Joints of Steel Frames with Flush End-plate Connections[J]. Journal of Vibration and Shock, 2013, 32(10): 43-49

PDF(1898 KB)

Accesses

Citation

Detail

段落导航
相关文章

/