碳纤维增强复合材料超声振动辅助车削有限元仿真

PDF(1983 KB)

振动与冲击 ›› 2015, Vol. 34 ›› Issue (14) : 110-114.

论文

路冬1,2，蔡力钢1，程强1，李志凯2

作者信息 +

Finite element simulation of ultrasonic vibration assisted turning of carbon fiber reinforced polymer composite

LU Dong1,2，CAI Li-gang1，CHENG Qiang1，LI Zhi-kai2

Author information +

文章历史 +

摘要

采用Hashin-Damage失效准则建立碳纤维增强复合材料超声振动辅助车削有限元模型，预测超声振动切削过程中切削力变化，将仿真所得切削力平均值与同条件下实验所得切削力平均值比较，验证有限元模型的有效性。将超声振动辅助车削切削力平均值与普通车削切削力平均值比较，采用超声振动辅助加工手段可明显降低切削力，且随超声振动振幅、频率增加切削力降低。研究超声振幅及频率对复合材料基体破坏及损伤影响表明，随超声振幅及频率增加基体破坏、压溃损伤、开裂损伤程度均降低。

Abstract

Finite element model of ultrasonic vibration assisted turning of carbon fiber reinforced polymer (CFRP) composite was developed based on the Hashin-Damage failure criterion. The cutting forces were predicted by using the finite element model. And this finite element model was validated by comparing the principle cutting force between simulation results and experimental ones. The cutting forces in ultrasonic vibration assisted turning are decreased obviously compared with those in conventional turning process. And the cutting forces are decreased with the increase of the vibration amplitude and vibration frequency. Furthermore, the degree of matrix damage, matrix cracking, and matrix crushing is decreased with the increase of the vibration amplitude and vibration frequency.

导出引用

路冬1,2，蔡力钢1，程强1，李志凯2. 碳纤维增强复合材料超声振动辅助车削有限元仿真[J]. 振动与冲击, 2015, 34(14): 110-114

LU Dong1,2，CAI Li-gang1，CHENG Qiang1，LI Zhi-kai2. Finite element simulation of ultrasonic vibration assisted turning of carbon fiber reinforced polymer composite[J]. Journal of Vibration and Shock, 2015, 34(14): 110-114

参考文献

[1] 马星辉. 碳纤维复合材料超声振动铣削的技术基础研究[D]. 焦作: 河南理工大学, 2009.
[2] 王晓博. 碳纤维复合材料超声高速铣削技术研究[D]. 石家庄: 河北科技大学, 2012.
[3] Makhdum F, Jennings L T, Roy A,et al. Cutting forces in ultrasonically assisted drilling of carbon fibre-reinforced plastics[J]. Journal of Physics: Conference Series, 2012, 382: 012019.
[4] Xu W, Zhang L, Wu Y. Elliptic vibration-assisted cutting of fibre-reinforced polymer composites: Understanding the material removal mechanisms[J]. Composites Science and Technology, 2014, 92:103-111.
[5] Xu W, Zhang L. On the mechanics and material removal mechanisms of vibration-assisted cutting of unidirectional fibre-reinforced polymer composites[J]. International Journal of Machine Tools and Manufacture, 2014, 80:1-10.
[6] Liu J, Zhang D, Qin L,et al. Feasibility study of the rotary ultrasonic elliptical machining of carbon fiber reinforced plastics (CFRP)[J]. International Journal of Machine Tools and Manufacture, 2012, 53(1): 141-150.
[7] Phadnis V A, Roy A, Silberschmidt V V. A finite element model of ultrasonically assisted drilling in carbon/epoxy composites[J]. Procedia CIRP, 2013, 8: 140-145.
[8] Cong W, Pei Z, Sun X,et al. Rotary ultrasonic machining of CFRP: a mechanistic predictive model for cutting force[J]. Ultrasonics, 2014, 54(2): 663-675.
[9] Santiuste C, Soldani X, Miguélez M H. Machining FEM model of long fiber composites for aeronautical components [J]. Components Structures, 2010, 92(3): 691-698.
[10] Hashin Z, Rotem A. A fatigue criterion for fiber-reinforced materials[J]. Journal of Composite Materials,1973,7(6):448- 464.
[11] Hashin Z. Failure criteria for unidirectional fiber composites [J]. Journal of Applied Mechanics, 1980, 7(4): 329-334.
[12] Rao G, Mahajana P, Bhatnagar N. Three-dimensional macro-mechanical finite element model for machining of unidirectional fiber reinforced polymer composites[J]. Materials Science and Engineering, 2008, 498(1/2):142-149.
[13] Iliescu D, Gehin D, Iordanoff I,et al. A discrete element method for the simulation of CFRP cutting [J]. Composite Science and Technology, 2010, 70:73-80.