典型汽轮发电机可倾瓦径向轴承冲击刚度研究

PDF(2000 KB)

振动与冲击 ›› 2019, Vol. 38 ›› Issue (20) : 77-82.

论文

李佳张博丁炜周相荣

作者信息 +

A study on the shock stiffness of a titling-pad bearing in a turbo generator

LI Jia ZHANG Bo DING Wei ZHOU Xiangrong

Author information +

文章历史 +

摘要

本文采用仿真结合试验的方法开展汽轮发电机径向可倾瓦滑动轴承的冲击刚度参数研究。基于不同的轴承冲击试验工况，采用黑箱法通过数值模拟识别了轴承冲击刚度参数。研究表明，径向可倾瓦滑动轴承的冲击刚度可采用等值的非交叉刚度模拟，且轴承刚度冲动比与冲击速度之间存在线性比例关系。该方法可为同类型径向可倾瓦滑动轴承的冲击刚度模拟提供参考。

Abstract

The impact performance of a tilting-pad journal bearing in a turbo generator was studied by means of simulation and test.The shock stiffness of the bearing was considered as the only unknown quantity in a black box and it was identified through comparing the simulation result and the test result in various shock test cases.It shows that the shock characteristics of the tilting-pad journal bearing can be simplified as an equivalent non-intersecting stiffness parameter, and there is a simple formula relation between the shock stiffness and the shock velocity which is loaded to the bearing and represents the shock energy.

导出引用

李佳张博丁炜周相荣. 典型汽轮发电机可倾瓦径向轴承冲击刚度研究[J]. 振动与冲击, 2019, 38(20): 77-82

LI Jia ZHANG Bo DING Wei ZHOU Xiangrong. A study on the shock stiffness of a titling-pad bearing in a turbo generator[J]. Journal of Vibration and Shock, 2019, 38(20): 77-82

参考文献

[1] 钟一谔，河衍宗，王正，等．转子动力学[M]．北京：清华大学出版社，1987.
[2] 闻邦椿，顾家柳，夏松波，等．高等转子动力学－理论、技术及应用[M]．北京：机械工业出版社，2000.
[3] 张宇，陈宇恕，毕勤胜．转子－轴承－基础非线性动力学研究[J]．振动工程学报，1998，11（1）:24-30.
Zhang Yu, Chen Yushu，Bi Qinsheng, Nonlinear dynamic analysis of rotor-bearing-foundation system [J]．Journal of Vibration Engineering, 1998, 11(1): 24-30.
[4] 崔颖，刘占生，叶建槐.大型非线性转子－密封－轴承系统的不平衡响应与稳定性[J].振动与冲击，2011，30(5)：205-207.
Cui Ying，Liu Zhansheng，Ye Jianhuai. Dynamic Response and Stability of a Large Scale Nonlinear Rotor-Seal-Bearing System[J].Journal of Vibration and Shock, 2011, 30(5): 205-207.
[5] 孟光.转子动力学研究的回顾与展望[J].振动工程学报，2002，15（1）：1-9.
Meng Guang. Retrospect and Prospect to the Research on Rotor dynamics [J]. Journal of vibration engineering, 2002，15（1）：1-9.
[6] 特劳佩尔．热力透平机[M]．郑松宇，等译．北京：机械工业出版社，1988：603-609．
[7] 徐钢峰，谢明春，顾越，等．汽轮发电机径向滑动轴承性能研究［J］．润滑与密封，2007，32（6）：112-114．
Xu Gangfeng, Xie Mingchun, Gu Yue, et all. Research of the Performance of Journal Bearings in Turbogenerator [J]. Lubrication Engineering, 2007,32(6):112-114.
[8] 王丽萍，乔广，郑铁生．可倾瓦轴承的完整动力分析模型及计算方法［Ｊ］．机械工程学报，2008，44（1）：75-80．
Wang Liping, Qiao Guang, Zheng Tiesheng. Analysis and Calculate Model for the Complete Dynamical Coefficients of Titling-pad Bearings [J]. CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2008, 44(1):75-80.
[9] 郭伟，戴俊，李国平，等．径向可倾瓦轴承动特性特征参数影响研究［Ｊ］．船舶工程，2014,s1:62-65.
GUO Wei, DAI Jun, LI Guoping, et al. Study of the Characteristic Parameters Influence of Titling-pad Journal Radial Bearing Dynamic Performance [J].SHIP ENGINEERING, 2014,s1:62-65.
[10] 孙云昊，金健，吴兵，等.可倾瓦径向滑动轴承油膜动特性实验测试[J].润滑与密封，2014，39（4）：98-104.
Sun Yunhao,Jin Jian,Wu Bing, et al. An Experimental Test of the Dynamic Characteristics of Titling-pad Journal Bearins [J]. Lubrication Engineering, 2014，39（4）：98-104.
[11] 汪玉，华宏星.舰船现代冲击理论及应用[M]．科学出版社，2005.
[12] ABAQUS 6.6在机械工程中的应用[M]. 中国水利水电出版社 , 赵腾伦, 2007.
[13] ABAQUS有限元分析从入门到精通[M]. 电子工业出版社 , 陈海燕, 2015.
[14] 楼江雷唐进元. 基于 CAE/CAT/CAO 的齿轮箱轴承结合部等效刚度识别方法[J].振动与冲击，2014, 33(23): 81-86.
LOU Jiang-lei TANG Jin-yuan. A method of equivalent stiffness identification for bearing joint of gearbox based on CAE/CAT/CAO[J], Journal of Vibration and Shock,2014, 33(23): 81-86.
[15] 郝烨江，李强，郑静. 基于ABAQUS 的列车轴箱轴承动力学分析[J].轴承，2014（3）：10-15.
Hao Yejiang，Li Qiang，Zheng Jing. Dynamics Analysis of Train Axle Box Bearings Based on ABAQUS[J]. Bearing 2014 ，No． 3: 10-15.
[16] 黑箱理论及其应用[J]. 金亚坪.电力技术. 1985(11).