具有大振幅放大系数的倒锥形变幅杆

PDF(1844 KB)

振动与冲击 ›› 2020, Vol. 39 ›› Issue (24) : 143-149.

论文

具有大振幅放大系数的倒锥形变幅杆

张然，贺西平，王照伟

作者信息 +

An inverted cone horn with large amplitude amplification factor

ZHANG Ran,HE Xiping,WANG Zhaowei

Author information +

文章历史 +

摘要

有些超声处理的应用中，为了使处理范围大、效率高，希望变幅杆有大的输出面积，但小端面输入大输出面变幅杆的放大系数往往小于1。为了满足实际加工中振幅放大系数与应力的要求，提出了一种前端开横向矩形通孔的倒锥形变幅杆。计算了输出端面位移分布规律与平均放大系数，放大系数大于同尺寸的实心变幅杆。研究了孔的几何尺寸对杆放大系数及谐振频率的影响。进一步将变幅杆的平均放大系数作为目标函数进行了优化设计，得到了大放大系数变幅杆的最优开孔尺寸。把优化后变幅杆的四个直角改为了弧形角，减小了（横向）、避免了（纵向）应力集中，文中对此也进行了分析。

Abstract

In some applications of ultrasonic processing, in order to make the processing range wide and high efficiency, a horn is expected to a large output area.However, the amplification coefficient of the horn with a large output surface is often less than 1.In order to meet the requirement of amplitude amplification factor and stress in actual machining, an inverted cone horn with cuboid hole at the front end was proposed.The displacement distribution law and average amplification factor of the output end were calculated, the amplification factor was greater than that of the solid horn of the same size.The relationship of the amplification factor with geometry of the hole and resonance frequency was studied.The average magnification coefficient of the horn was taken as the objective function to optimize the design and the optimal size of the hole with large amplification factor was obtained.In order to reduce (transverse) and avoid (longitudinal) stress concentration, the four right angles of the cuboid hole were changed to arc angles, which were also analyzed in the paper.

导出引用

张然，贺西平，王照伟. 具有大振幅放大系数的倒锥形变幅杆[J]. 振动与冲击, 2020, 39(24): 143-149

ZHANG Ran,HE Xiping,WANG Zhaowei. An inverted cone horn with large amplitude amplification factor[J]. Journal of Vibration and Shock, 2020, 39(24): 143-149

参考文献

[1] Heimbach D, Munver R, Zhong P, et al. Acoustic and mechanical properties of artificial stones in comparison to natural kidney stones [J]. The Journal of urology, 2000, 164(2):537-544.
[2] J.A. Gallego-Juárez, L. Elvira-Segura, G. Rodrı́guez-Corral. A power ultrasonic technology for deliquoring [J]. Ultrasonics, 2003, 41(4):255.
[3] Oh J H, Jung H E, Lee J S, et al. Design and performances of high torque ultrasonic motor for application of automobile [J]. Journal of Electroceramics, 2009, 22(1-3):150-155.
[4] Alarcon-Rojo A D, Janacua H, Rodriguez J C, et al. Power ultrasound in meat processing[J]. Meat Science, 2015, 107:86-93.
[5] Astashev VK, Babitsky V I. Ultrasonic Processes and Machines. Dynamics, Control and Applications [M]. Ultrasonic Processes and Machines. Springer Berlin Heidelberg, 2007.
[6] 贺西平,张海岛.单端输入多端输出的纵振动转换体的研究[J].中国科学:物理学力学天文学, 2016, 3: 003.
HE X P, ZHANG H D. Investigation of a converter of longitudinal vibration with single-input and multi-outputs[J]. SCIENTIA SINICA: Physica, Mechanica&Astronomica, 2016, 3: 003.
[7] Zongsu W, Kosterman J A, Ruiyang X, et al. Designing and characterizing a multi-stepped ultrasonic horn for enhanced sonochemical performance [J] .Ultrasonics Sonochemistry, 2015, 27:325-333.
[8] 潘巧生,刘永斌,贺良国等.一种大振幅超声变幅杆设计[J]. 振动与冲击, 2014, 33(9):1-5.
Pan Qiaosheng, Liu Yongbin, He Liangguo, et al. Design of a large amplitude ultrasonic horn [J]. Journal of Vibration and Shock, 2014, 33(9): 1-5.
[9] Juan A. Gallego-Juarez. High-power ultrasonic processing: Recent developments and prospective advances[J]. Physics Procedia,2010,3(1)：35-47.
[10] Germán Rodríguez,Enrique Riera,Juan A. Gallego-Juárez,Víctor M. Acosta,Alberto Pinto,Ignacio Martínez,Alfonso Blanco. Experimental study of defoaming by air-borne power ultrasonic technology [J]. Physics Procedia,2010,3(1)：135-139.
[11] Prei K.Apparatus for generating and radiating ultrasonic energy：Acoustical Society of America Journal.US 4537511 A1985.
[12] Žnidarčič A, Mettin R, Cairós C, et al. Attached cavitation at a small diameter ultrasonic horn tip[J]. Physics of Fluids, 2014, 26(2):159-36.
[13] Dular M, Mettin R, Žnidarčič A, et al. Dynamics of Attached Cavitation at an Ultrasonic Horn Tip[C]// International Symposium on Cavitation. 2012:741-745.
[14] Kojima Y, Imazu H, Nishida K. Physical and chemical characteristics of ultrasonically-prepared water-in-diesel fuel: Effects of ultrasonic horn position and water content.[J]. Ultrasonics Sonochemistry, 2014, 21(2):722.
[15] 王维鸽,贺西平.超声纵振动空心变幅杆的特性[J]. 陕西师范大学学报：自然科学版, 2015, 43(4): 43-47.
Wang W G, He X P. Study on the different shapes of ultrasonic horn with a central hole[J]. Journal of Shanxi Normal University: Natural Science Edition, 2015, 43(4): 43-47.
[16] 崔晓娟,贺西平,蒙永红,卫相润.APDL语言优化设计复合超声变幅杆[J]. 云南大学学报(自然科学版),2018,40(1):88-93.
CUI X J, HE X P, MENG Y H, et al. On optimization design of composite ultrasonic horn with APDL language[J]. Journal of Yunnan University (Natural Sciences), 2018, 40 (1):88-93.
[17] 武婷婷,贺西平,汪彦军,李娜,杨佳婷.多台阶过渡段阶梯型变幅杆的设计[J].陕西师范大学学报(自然科学版),2018,46(01):62- 66.
WU Tingting, HE X P,WANG Yanjun, et al. Design of multi-step ultrasonic horn.[J].Journal of Shaanxi Normal University: Natural Sciences Edition, 2018,46 (01):62-66.
[18] 贺西平,程存弟.几种常见形状函数超声变幅杆性能参量的统一表达[J].陕西师大学报(自然科学版),1994(03):29-32.
HE X P, CHENG C D, Unified expression for each of the performance factors of the several common shape functional ultrasonic transformer [J]. Journal of Shaanxi Normal University: Natural Sciences Edition, 1994, 22(3):29-32.