基于粒子法的可变边界柔性气缸弹射研究

PDF(1901 KB)

振动与冲击 ›› 2023, Vol. 42 ›› Issue (10) : 43-50.

论文

基于粒子法的可变边界柔性气缸弹射研究

杨宝生，姜毅，杨哩娜

作者信息 +

Research on flexible cylinder ejection with variable boundary based on corpuscular method

YANG Baosheng，JIANG Yi，YANG Lina

Author information +

文章历史 +

摘要

为解决现有弹射器红外目标明显、能量不稳定、结构复杂等问题，进一步提升弹射效率、弹射稳定性，本研究在现有压缩空气弹射器的基础上提出一种可自主增长气缸边界的柔性气缸弹射器，实现高压气体在柔性气缸约束下的长距离做功。在显式动力学基础上，建立多工况下的大尺度柔性气缸弹射负载有限元模型，实现基于粒子法模型的大尺度柔性结构弹射负载的流固耦合数值仿真。研究结果表明在充气量一定时，柔性气缸弹射器比压缩空气弹射器弹射速度增加11.7%，火箭最大过载减小71.6%。进一步研究表明，同种织物漏气的主要影响因素为柔性气缸内外压差，针对不同材料漏气，选取三种材料，其中棉纶66C为柔性气缸织物的弹射系统的弹射指标最佳。对比不同环境压力，外界大气压越低，弹射动能越高，70kPa环境压力下，比标准大气环境压力下，动能增加15.8%。

Abstract

In order to solve the problems of obvious infrared target, unstable energy and complex structure of the existing ejector, and further improve the ejection efficiency and ejection stability, this study proposes a flexible cylinder ejector that can independently increase the cylinder boundary based on the existing compressed air ejector, so as to realize the long-distance work of high-pressure gas under the constraint of flexible cylinder. On the basis of display dynamics, the finite element model of large-scale flexible cylinder ejection load under multiple working conditions is established, and the fluid-solid coupling numerical simulation of large-scale flexible structure ejection load based on particle method model is realized. The results show that when the inflation rate is constant, the velocity of flexible cylinder ejection is 11.7 % higher than that of compressed air ejection, and the maximum overload of missile is reduced by 71.6 %. Further research shows that the main influencing factors of air leakage of the same fabric are the pressure difference inside and outside. For air leakage of different materials, three materials are selected, among which cotton 66C is the best ejection index of ejection system of flexible cylinder fabric. Compared with different ambient pressure, the lower the ambient pressure is, the higher the ejection kinetic energy is. Under 70 MPa ambient pressure, the kinetic energy increases by 15.8 % compared with the standard atmospheric pressure.

导出引用

杨宝生，姜毅，杨哩娜. 基于粒子法的可变边界柔性气缸弹射研究[J]. 振动与冲击, 2023, 42(10): 43-50

YANG Baosheng，JIANG Yi，YANG Lina. Research on flexible cylinder ejection with variable boundary based on corpuscular method[J]. Journal of Vibration and Shock, 2023, 42(10): 43-50

参考文献

[1] 姚琳,马大为,任杰,魏龙涛,李亚.无杆式气缸弹射装置内弹道仿真与优化设计[J].振动与冲击,2017,36(06):122-127.
Yao L , Dawei M A , Ren J , et al. Internal ballistics simulatin on and improving of rod-less cylinder cold launching device[J]. Journal of Vibration and Shock. 2017,36(06):122-127.
[2] 谢磊,高钦和,邵亚军. 压缩空气弹射内弹道影响因素作用规律研究[J]. 火力与指挥控制,2019,44(3):116-119.
Xie L, Gao Q H, Shao Y J. Analysis of Factors to Compressed Air Ejection Interior Ballistic Based on FLUENT[J]. Fire Control & Command Control, 2019.
[3] 颜凤,史少岩,姜毅. 燃气蒸汽式弹射内弹道研究[J]. 舰船科学技术, 2017, 39(3):118-122.
Yan F, Shi S Y, Jiang Y. Research on interior ballistic of gas-steam ejection[J].Ship Science and Technology , 2017, 39(3):118-122.
[4] 贾文昂,赵伟.分离式气液混合弹射动力系统的研究[J].振动与冲击,2017,36(04):93-98.
Jia W , Zhao W . A study on the separate ejection system with gas-hydraulic hybrid[J]. Zhendong yu Chongji/Journal of Vibration and Shock, 2017, 36(4):93-98
[5] 董健年,吴毅,桂应春,等. 电磁弹射装置中线圈受力与电流相位的关系[J]. 高电压技术,2006,32(7):79-80,122.
Dong J, Wu Y, Gui Y, et al. Relationship Between Electromagnetic Force and Phases of Current in Electromagnetic Launch[J]. High Voltage Engineering, 2006, 32(7):79-80.
[6] 柳忠彬,肖守讷,王欢. 非爆破柔性气缸弹射器研究 [J]. 兵工学报,2017,38(2):389-395.
Liu Z B, Xiao S N, Wang H. Research on Non-blasting Flexible Cylinder Launcher[J]. Binggong Xuebao/Acta Armamentarii, 2017, 38(2):389-395.
[7] WANG J T. An analytical model for an airbag with a hybrid inflator[J]. ASME Crashworththiness Occupant Prot Transportation Syst, 1995,30:467-497.
[8] WANG J T, NEFSKE D J. A new CAL3D airbag inflation model[J]. SAE Transactions, 1988,97:697-706.
[9] Wenyu Lian, Lars Olovesson , Dilip Bhalsod. Development of CFD Capability for Airbag Out-of-Position[C]. ASME 2004 Heat Transfer/Fluids Engineering Summer Conference .Charlotte, North Carolina.
[10] OLOVSSON L. Corpuscular method for OOP Simulations, difficulty dealing with small vent holes[C]//The 6th European LS-DYNA Users Conference. Gothenburg: ERAB, 2007:1-4.
[11] MROZ K, PIPKORN B. Mathematical modelling of the early phase deployment of a passenger airbag–folding using origami theory and inflation using LS-DYNA particle method[C]//The 6th European LS-DYNA Users Conference. Gothenburg: ERAB, 2007:71-86.
[12] FREISINGER M, HOFFMANN J, STAHLSCHMIDT S. Investigation of the early inflation characteristics of a complex folded knee airbag with the new corpuscular method in LS-DYNA[C]//The 6th European LS-DYNA Users Conference. Gothenburg: ERAB, 2007:7-20.
[13] HIRTH A, HAUFE A, OLOVSSON L. Airbag simulation with LS-DYNA past-present-future[C]//The 6th European LS-DYNA Users Conference. Gothenburg: ERAB, 2007: 23-46.
[14]马亮,王新厚. 安全气囊织物动态透气性与静态透气性的测试[J]. 测试技术学报,2009,23(3):205-209.
Liang MA, Wang X. Measurement and Comparison of the Dynamic Permeability and the Static Permeability of Airbag Fabrics[J]. Journal of Test and Measurement Technology, 2009
[15] Wenyu Lian, Dilip Bhalsod, Lars Olovesson. Benchmark Study On the AIRBAG_PARTICLE Method for Out-Of-Position Applications [C].10th International LS-DYNA Uaers’Conference,2008.