基于集成包络谱的滚动轴承早期故障检测指标

PDF(1820 KB)

振动与冲击 ›› 2023, Vol. 42 ›› Issue (10) : 67-73.

论文

杨新敏，郭瑜，田田，朱云贵

作者信息 +

Early fault detection index of rolling bearing based on integrated envelope spectrum

YANG Xinmin，GUO Yu，TIAN Tian，ZHU Yungui

Author information +

文章历史 +

摘要

针对常规统计指标对滚动轴承早期故障不敏感的问题，本文基于集成包络谱(Integrated Envelope Spectrum, IES)提出一种滚动轴承早期故障检测指标——集成包络谱谱峰因子(Integrated Envelope Spectrum Peak Factor, IESPF)，应用于轴承早期故障检测。首先对信号进行快速谱相干(Fast spectral Coherence, Fast-SCoh)计算；然后根据循环频率与谱频率的映射关系确定包含故障信息丰富的频带，并对该频带积分获得IES；最后计算IES的最大值与其均方根值的比值，从而获得本文所提指标IESPF，应用于轴承外圈故障检测。通过分析滚动轴承外圈模拟故障实验数据和疲劳实验数据表明，本文所提指标对轴承外圈早期故障较敏感，适用于早期故障检测。

Abstract

Aiming at the problem that conventional statistical index is not sensitive to the early fault of bearing, an early fault detection indicator (Integrated Envelope Spectrum Peak Factor, IESPF)of rolling bearings is proposed based on integrated envelope spectrum (IES), which is applied to bearing degradation assessment. Firstly, the signal is calculated by the algorithm of fast spectral coherence (Fast-SCoh). Then the frequency band with rich fault information was determined according to the mapping relationship between cycle frequency and carrier frequency, and integrate the frequency band to obtain the integrated envelope spectrum (IES) for bearing fault detection. Finally, the ratio of the maximum value in IES to the root mean square value of IES is calculated to obtain the IESPF proposed in this paper, and the degree of bearing fault is evaluated according to its value. The analysis of the experimental data and fatigue test data of artificial rolling bearing faults shows that the indexes proposed in this paper are sensitive to early faults and are suitable for early fault detection.

导出引用

杨新敏，郭瑜，田田，朱云贵. 基于集成包络谱的滚动轴承早期故障检测指标[J]. 振动与冲击, 2023, 42(10): 67-73

YANG Xinmin，GUO Yu，TIAN Tian，ZHU Yungui. Early fault detection index of rolling bearing based on integrated envelope spectrum[J]. Journal of Vibration and Shock, 2023, 42(10): 67-73

参考文献

[1] Zhang H, Borghesani P, Smith W A, et al. Tracking the natural evolution of bearing spall size using cyclic natural frequency perturbations in vibration signals[J]. Mechanical Systems and Signal Processing, 2021,151(1): 107376.
[2] XU Xiaoqiang, ZHAO Ming, LIN Jing, et al. Envelope harmonic-to-noise ratio for periodic impulses detection and its application to bearing diagnosis[J] Measurement,2016,19 (3): 385–397.
[3] Tsui K L, Nan C, Qiang Z, et al. Prognostics and health management: A review on data driven approaches[J]. Mathematical Problems in Engineering, 2015(6): 1-17.
[4] Tandon N. A comparison of some vibration parameters for the condition monitoring of rolling element bearings[J]. Measurement, 1994, 12(3): 285-289.
[5] ZHANG XingHui, TENG HongZhi, KANG JianShe, et al. Enhanced bearing fault detection and degradation analysis based on narrowband interference cancellation[J]. International Journal of System Assurance Engineering and Management, 2014, 5(4): 645-650.
[6] ZHONG JingJing, WANG Dong, Ju’e Guo, et al. Theoretical Investigations on kurtosis and entropy and their improvements for system health monitoring[J]. IEEE Transactions on Instrumentation and Measurement, 2020, 99(7): 1-10.
[7] Wang Dong, Z Peng, LI Xi. The sum of weighted normalized square envelope: A unified framework for kurtosis, negative entropy, gini index and smoothness index for machine health monitoring[J]. Mechanical Systems and Signal Processing,2020,140(8):106725.
[8] ZHONG Jingjing, WangDong, LIChuan. A nonparametric health index and its statistical threshold for machine condition monitoring[J]. Measurement,2021,167(6): 108290.
[9] HE Wei, MIAO Qiang, Michael Azarian, et al. Health monitoring of cooling fan bearings based on wavelet filter.[J]. Mechanical Systems and Signal Processing, 2015, 64(12): 149-161.
[10] 张龙, 成俊良, 李兴林,等. 基于自适应频带冲击强度的滚动轴承故障量化评估[J]. 振动与冲击, 2018, 037(9):30-38.
ZHANG Long, CHENG Jun-liang, LIN Xing-lin, et al. Fault quantitative evaluation of rolling bearings based on shock value of selected frequency band[J]. Journal of Vibration and Shock,2018,037(9): 30-38.
[11] 张龙, 吴荣真. 滚动轴承性能退化评估的自适应频带熵能比指标[J].振动与冲击, 2021,2(6):63-71.
ZHANG Long, WU Rongzhen. Performance degradation assessment of rolling bearings based on the entropy energy ratio of adaptive frequency band[J]. Journal of Vibration and Shock,2021, 2(6): 63-71.
[12] Antoni J, Xin G, Hamzaoui N. Fast computation of the spectral correlation[J]. Mechanical Systems and Signal Processing, 2017, 92(8): 248-277.
[13] MIAO YongHao, ZHAO Ming, LIN Jing. Identification of mechanical compound-fault based on the improved parameter-adaptive variational mode decomposition[J]. ISA transactions, 2018,84(5): 82-95.
[14] Antoni J, Randall. Unsupervised noise cancellation for vibration signals: part II—a novel frequency-domain algorithm[J]. Mechanical Systems and Signal Processing, 2004,18(1): 103-117.
[15] https://ti.arc.nasa.gov/tech/dash/groups/pcoe/prognostic-data-repository/#bearing.
[16] YANG Chuangyan, MA Jun, WANG Xiaodong, et al. A novel based-performance degradation indicator RUL prediction model and its application in rolling bearing[J]. ISA Transactions, 2022,121(2): 349-364.