基于杆系离散元法的结构接触碰撞行为分析

许强1,2,叶继红1,2

振动与冲击 ›› 2023, Vol. 42 ›› Issue (13) : 103-110.

PDF(2350 KB)
PDF(2350 KB)
振动与冲击 ›› 2023, Vol. 42 ›› Issue (13) : 103-110.
论文

基于杆系离散元法的结构接触碰撞行为分析

  • 许强1,2,叶继红1,2
作者信息 +

Structural contact-collision behavior analysis based on bar system discrete element method

  • XU Qiang1,2, YE Jihong1,2
Author information +
文章历史 +

摘要

该文将杆系离散元法拓展至结构的碰撞行为分析中,通过对颗粒运动轨迹修正实现模拟杆件间的碰撞响应。首先根据杆件间可能发生的接触模式建立了“点-线”接触模型,然后将“虚拟接触点对”的概念引入临界接触约束条件,详细推导了接触力的计算公式,并采用fortran语言编制了基于离散元法的结构碰撞行为分析程序。通过对典型接触碰撞算例进行模拟和分析,定量验证了本文算法的正确性和有效性。结果表明,“点-线”接触模型可以对发生接触碰撞的杆件做出及时判断,并准确计算法向排斥力和切向摩擦力;同时接触碰撞过程中存在能量耗散。

Abstract

This paper presents the structural connect-impact analysis using the member discrete element method(MDEM), and the collision response between the members is simulated by correcting the particle motion trajectory. Firstly, a point-line contact model is established based on the possible contact modes between the members, and then the concept of virtual contact point pairs is introduced into the critical contact constraint conditions, also, the formulations of the contact force are deduced in detail. The program based on the MDEM is also develop by Fortran Language to analyze structural contact-impact behaviors. The correctness and effectiveness of the algorithm are quantitatively verified through the simulation and analysis of typical numerical examples. The results show that the point-line contact model can make timely judgments on contact-impact between members and accurately calculate the normal repulsive force and tangential friction force, meanwhile, there is energy dissipation in the process of contact-impact.

关键词

杆系离散元 / 颗粒 / 接触碰撞 / 接触模型 / 碰撞力

Key words

member discrete element method / particle / contact-impact / contact model / impact force

引用本文

导出引用
许强1,2,叶继红1,2. 基于杆系离散元法的结构接触碰撞行为分析[J]. 振动与冲击, 2023, 42(13): 103-110
XU Qiang1,2, YE Jihong1,2. Structural contact-collision behavior analysis based on bar system discrete element method[J]. Journal of Vibration and Shock, 2023, 42(13): 103-110

参考文献

[1] Hughes T J R, Taylor R L, Sackman J L, et al. A finite element method for a class of contact-impact problems[J].  Computer Methods in Applied Mechanics & Engineering,  1976, 8(3): 249-276.
[2]  Chaudhary A B, Bathe K J. A solution method for static and dynamic analysis of three-dimensional contact problems with friction[J]. Computers & Structures, 1986, 6(24): 855-873.
[3] Oden J T, Kikuchi N. Finite element methods for constrained problems in elasticity[J]. International Journal for Numerical Methods in Engineering, 1982, 18(5): 701-725.
[4] Papadopoulos P, Taylor R L. A mixed formulation for the finite element solution of contact problems[J]. Computer Methods in Applied Mechanics and Engineering,  1992, 94(3): 373-389.
[5] Zhong Z, Nilsson L. Lagrange multiplier approach for evaluation of friction in explicit finite-element analysis[J]. Communications in numerical methods in engineering,  1994, 10(3): 249-255.
[6] 王震, 赵阳, 杨学林. 薄壳结构碰撞、断裂和穿透行为的向量式有限元分析[J]. 建筑结构学报, 2016, 37(6):53-59.
Wang Zhen, Zhao Yang, Yang Xuelin. Collision-contact, crack-fracture and penetration behavior analysis of thin-shell structures based on vector form intrinsic finite element[J]. Journal of Building Structures, 2016, 37(6): 53-59.
[7] 王震, 赵阳. 膜材碰撞接触分析的向量式有限元法[J]. 计算力学学报, 2014, 31(03): 378-383.
Wang Zhen, Zhao Yang. Vector form intrinsic finite element method for collision-contact analysis of membrane material[J]. Chinese Journal of Computational Mechanics, 2014, 31(03): 378-383.
[8] 喻莹,罗尧治. 基于有限质点法的结构碰撞行为分析[J]. 工程力学, 2013, 30(3): 66-72.
Yu Y, Luo Y Z. Impact analysis of structures based on finite particle method[J]. Engineering mechanics, 2013, 30(3): 66-72. 
[9] 齐念,叶继红. 基于离散元法的杆系结构几何非线性大变形分析[J]. 东南大学学报(自然科学版), 2013(05): 917-922.
Qi Nian, Ye Jihong. Geometric nonlinear analysis with large deformation of member structures by discrete element method. Journal of southeast university (Natural Science Edition), 2013, 43(5): 917-922.
[10] 顾祥林,印小晶,林峰,等. 建筑结构倒塌过程模拟与防倒塌设计[J]. 建筑结构学报. 2010, 31(6): 179-187.
Gu Xianglin, Yin Xiaojing, Lin Feng, et al. Simulation of collapse process and design method to resist ollapse for building structures[J]. Journal of Building Structures, 2010, 31 ( 6 ): 179-187.
[11] 顾祥林,黄庆华,汪小林,等. 地震中钢筋混凝土框架结构倒塌反应的试验研究与数值仿真[J]. 土木工程学报. 2012(09): 36-45.
Gu Xianglin, Huang Qinghua, Wang Xiaolin, et al. Spatial collapse responses of reinforced concrete frame structures under earthquakes: test study and numerical simulation[J]. China Civil Engineering Journal, 2012, 45(9): 36-45.
[12] 齐念,叶继红. 弹性DEM方法在杆系结构中的应用研究[J]. 工程力学. 2017, 34(07): 11-20.
Qi Nian, Ye Jihong. Application of elastic discrete element method in member structures[J]. Engineering mechanics, 2017, 34(7): 11-20.
[13] Xu Q, Ye J H. An adaptively coupled DEM–FEM algorithm for geometrical large deformation analysis of member structures[J]. Computational Particle Mechanics, 2020, 7(5): 947-959.
[14] 齐念,叶继红. 弹塑性DEM方法在杆系结构中的应用研究[J]. 振动与冲击, 2017, 30(6): 929-937.
Qi Nian, Ye Jihong. Application of discrete element method in member structures: elastoplastic analysis[J]. Journal of vibration engineering, 2017, 30(6): 929-937.
[15] 叶继红,张梅. 单层网壳结构弹塑性屈曲分析的离散单元法研究[J]. 工程力学, 2019, 36(7): 30-37.
Ye Jihong, Zhang Mei. Discrete element method for elastoplastic buckling analysis of single-layer reticulated shells[J]. Engineering mechanics, 2019, 36(7): 30-37.
[16] Ye J H, Xu L L. Member Discrete Element Method for Static and Dynamic Responses Analysis of Steel Frames with Semi-Rigid Joints[J]. Applied Sciences, 2017, 7(7): 714.
[17] 许强, 叶继红. 基于杆系离散元的半刚性连接计算方法及钢框架静/动力行为研究[J/OL].建筑结构学报,  https://doi.org/10.14006/j.jzjgxb.2021.0326.
Xu Qiang, Ye Jihong. Static and dynamic behavior analysis of semi-rigid steel frame based on member discrete element method[J/OL]. Journal of Building Structures,  https://doi.org/10.14006/j.jzjgxb.2021.0326.
[18] 许玲玲, 叶继红, 薛素铎. 大质量法在基于离散元法多点激励分析中的应用和误差修正[J]. 土木工程学报, 2016, 49(S1): 32-36.
Xu Lingling, Ye Jihong. Application and error improvement of large mass method used in DEM-based multi-support excitation analysis[J] China Civil Engineering Journal, 2016, 49(S1): 32-36.
[19] Qi N, Ye J H. Nonlinear Dynamic Analysis of Space Frame Structures by Discrete Element Method[J]. Applied Mechanics and Materials, 2014, 638-640: 1716-1719.
[20] 叶继红, 张梅. 基于杆系离散单元法的单层网壳结构屈曲行为研究[J]. 建筑结构学报, 2019, 40(3):54-61.
Ye Jihong, Zhang Mei. Buckling behavior of single-layer reticulated shells based on member discrete element method[J]. Journal of Building Structures, 2019, 40(3):54-61.
[21] Ye J H, Qi N. Combination of DEM_FEM for Progressive Collapse Simulation of Domes Under Earthquake Action[J]. steel structures, 2018, 18(1): 305-316.
[22] Xu L L, Ye J H. DEM Algorithm for Progressive Collapse Simulation of Single Layer Reticulated Domes under Multi Support Excitation[J]. Journal of earthquake engineering, 2019, 23(1): 18-45.
[23] Ye J, Qi N. Progressive collapse simulation based on DEM for single-layer reticulated domes[J]. Journal of Constructional Steel Research, 2017, 128: 721-731.
[24] 齐念. DEM/FEM耦合计算方法研究及其在网壳倒塌破坏模拟中的应用[D]. 东南大学, 2016.
Qi Nian. Coupled DEM/FEM method and its application in collapse simulation of reticulated shells[D]. Nanjing: Southeast University, 2016: 38-55. 
[25] Simo J C, Wriggers P, Schweizerhof K H, et al. Finite deformation post-buckling analysis involving inelasticity and contact constraints[J]. International Journal for Numerical Methods in Engineering, 1986, 23(5): 779-800.
[26] 张鹏飞. 结构破坏行为的数值模拟计算方法研究[D]. 浙江大学, 2016.
Zhang Pengfei. Research on numerical methods for structural failure simulation[D]. Zhejiang University, 2016: 110-112.
[27] Wriggers P, Vu Van T, Stein E. Finite element formulation of large deformation impact-contact problems with friction[J]. Computers and Structures, 1990, 37(3): 319-331.

PDF(2350 KB)

Accesses

Citation

Detail

段落导航
相关文章

/