双轴惯性直线振动机械滚动轴承单一局部损伤故障诊断

郭宝良1,赵玉秀2,史丽晨1,李玲1,段志善1

振动与冲击 ›› 2023, Vol. 42 ›› Issue (24) : 24-31.

PDF(2042 KB)
PDF(2042 KB)
振动与冲击 ›› 2023, Vol. 42 ›› Issue (24) : 24-31.
论文

双轴惯性直线振动机械滚动轴承单一局部损伤故障诊断

  • 郭宝良1,赵玉秀2,史丽晨1,李玲1,段志善1
作者信息 +

Fault diagnosis of rolling bearings with single local damage in dual-shaft inertial linear vibrating machines

  • GUO Baoliang1,ZHAO Yuxiu2,SHI Lichen1,LI Ling1,DUAN Zhishan1
Author information +
文章历史 +

摘要

针对双轴惯性直线振动机械滚动轴承单一局部损伤故障判别问题,通过分析滚动轴承运行状态和载荷分布,建立基于Hertz接触理论的内、外环局部损伤故障的冲击振动模型并进行仿真和实验验证。研究结果表明,双轴惯性直线振动机械滚动轴承载荷分布区在振动方向近180°范围内随轴的旋转而周期性变化,使内、外环局部损伤故障的冲击响应的时域幅值存在显著的调制现象,其包络谱图中故障特征频率的边频和调制频率显著。外环故障与单轴惯性振动机械、内环故障与旋转机械的包络谱有很大的相似性,但轴承的受力和设备工作原理的不同导致时域波形和故障机理却有本质区别。为有效诊断振动机械滚动轴承故障提供了理论依据。

Abstract

Aimed at the fault identification problem of rolling bearings with single local damage fault in dual-shaft inertial linear vibrating machines, the impact vibration model about local damage fault of the inner ring and the outer ring on the basis of Hertz contact theory is established by analyzing the running state and load distribution of rolling bearings, while the simulation search and corresponding experiment verification are finished. The research results show that the load distribution area of the rolling bearing in dual-shaft inertial linear vibrating machines changes periodically with the rotation of the shaft within the range of nearly 180 ° along the vibration direction, so that the time domain amplitude of the impact response to the local damage fault of the inner and outer rings has a significant modulation phenomenon, and the side frequency and modulation frequency of the fault characteristic frequency in the envelope spectrum are significant. The envelope spectrum of the outer ring fault is very similar to that of the single-axis inertial vibration machinery, and the envelope spectrum of the inner ring fault is similar to that of the rotating machinery, but the difference of the bearing force and the working principle of the equipment results in the essential difference of the time domain waveform and the fault mechanism. It provides a theoretical basis for effective diagnosis of rolling bearing faults in vibration machinery.

关键词

双轴惯性直线振动机械 / 滚动轴承 / 局部损伤 / 故障诊断

Key words

dual-shaft inertial linear vibrating machines / rolling bearing / local damage / fault diagnosis

引用本文

导出引用
郭宝良1,赵玉秀2,史丽晨1,李玲1,段志善1. 双轴惯性直线振动机械滚动轴承单一局部损伤故障诊断[J]. 振动与冲击, 2023, 42(24): 24-31
GUO Baoliang1,ZHAO Yuxiu2,SHI Lichen1,LI Ling1,DUAN Zhishan1. Fault diagnosis of rolling bearings with single local damage in dual-shaft inertial linear vibrating machines[J]. Journal of Vibration and Shock, 2023, 42(24): 24-31

参考文献

[1] 陈仁祥,唐林林,胡小林,等.不同转速下基于深度注意力迁移学习的滚动轴承故障诊断方法[J].振动与冲击, 2022, 41(12): 95-101,195.
CHEN Renxiang, TANG Linlin, HU Xiaolin, et al. A rolling bearing fault diagnosis method based on deep attention transfer learning at different rotations [J]. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(12): 95-101,195.
[2] LI X, ZHANG W, DING Q. Understanding and improving deep learning-based rolling bearing fault diagnosis with attention mechanism[J]. Signal Processing, 2019, 161: 136-154.
[3] 吴超,崔玲丽,张建宇,等. 改进MBCV法在滚动轴承故障诊断中的应用[J].振动工程学报, 2022, 35(4): 942-948.
WU Chao, CUI Lingli, ZHANG Jianyu, et al. Fault diagnosis method of rolling bearing based on improved MBCV method [J]. Journal of Vibration Engineering, 2022, 35(4): 942-948.
[4] 刘强,赵荣珍,杨泽本. K-VMD融合包络熵与SVM滚动轴承故障识别方法研究[J].噪声与振动控制,2022,42(3):92-97,121.
LIU Qiang, ZHAO Rongzhen, YANG Zeben. Research of Fault Recognition Method of Rolling Bearings Based on K-VMD Envelope Entropy and SVM[J]. NOISE AND VIBRATION CONTROL, 2022, 42(3):92-97,121.
[5] 张旭辉,张超,樊红卫,等. 快速谱峭度结合阶次分析滚动轴承故障诊断[J].振动、测试与诊断, 2021, 41(6): 1090-1095,1235.
ZHANG Xuhui, ZHANG Chao, FAN Hongwei1, et al. Improved Fault Diagnosis of Rolling Bearing by Fast Kurtogram and Order Analysis [J]. Journal of Vibration,Measurement & Diagnosis, 2021, 41(6): 1090-1095,1235.
[6] McFadden P D, Smith J D. Model for the vibration produced by a single point defect in a rolling element bearing[J]. Journal of Sound and Vibration,1984, 96(1):69-82.
[7] 杨将新,曹冲锋,曹衍龙,等. 内圈局部损伤滚动轴承系统动态特性建模及仿真[J]. 浙江大学学报, 2007, 41(4): 551-555.
YANG Jiangxin, CAO Chongfeng, Cao Yanlong, et al. Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation[J]. Journal of Zhejiang University(Engineering Science), 2007, 41(4): 551-555.
[8] QIN Y, CAO F L, WANG Y, et al. Dynamics modelling for deep groove ball bearings with local faults based on coupled and segmented displacement excitation[J]. Journal of Sound and Vibration,2019,447:1-19.
[9] LUO M L, YU G, XING W, et al. An analytical model for estimating spalled zone size of rolling element bearing based on dual-impulse time separation [J]. Journal of Sound and Vibration,2019,453:87-102.
[10] 李志农,李云龙,任帅,等. 局部点蚀故障滚动体的滚动轴承动力学模型研究[J].振动工程学报, 2020, 33(3): 597-603.
LI Zhinong, LI Yunlong, REN Shuai, et al. Research on dynamic model of rolling bearing with local pitting fault in rolling bearing elenemt [J]. Journal of Vibration Engineering, 2020, 33(3): 597-603.
[11]JIANG Y C, HUANG W T, LUO J N , et al.An improved dynamic model of defective bearings considering the three-dimensional geometric relationship between the rolling element and defect area[J] Mechanical Systems and Signal Processing,2019,129:694-716.
[12] 闻邦椿,刘树英. 振动机械的理论与动态设计方法[M].北京:机械工业出版社,2001.
WEN Bangchun, LIU Shuying. Design theory and Dynamic design method of vibration machine[M]. Beijing:China Machine Press,2001:143-146.
[13] 郭宝良,段志善,郑建校等.振动机械滚动轴承单点点蚀故障诊断研究[J].振动工程学报, 2012, 25(5): 610-618.
GUO Baoliang, DUAN Zhishan, ZHENG Jianxiao et al. Fault diagnosis of single-point pitting corrosion for rolling bearing of vibrating machine [J]. Journal of Vibration Engineering, 2012, 25(5): 610-618.
[14] T A Harris, M N Kotzalas. 滚动轴承分析(第五版)[M]. 罗继伟,马伟,等译. 北京: 机械工业出版社, 2011.
T A Harris, M N Kotzalas. Rolling Bearing Analysis(Fifth edition)[M]. Luo Jiwei,Ma Wei,et al.transfer. Beijing: China Machine Press,2011.

PDF(2042 KB)

Accesses

Citation

Detail

段落导航
相关文章

/