舰用燃气轮机支架缩比模型试验方法研究

武双双1,2,冯麟涵2,张磊2,闫明1,王腾2

振动与冲击 ›› 2023, Vol. 42 ›› Issue (9) : 106-111.

PDF(1809 KB)
PDF(1809 KB)
振动与冲击 ›› 2023, Vol. 42 ›› Issue (9) : 106-111.
论文

舰用燃气轮机支架缩比模型试验方法研究

  • 武双双1,2,冯麟涵2,张磊2,闫明1,王腾2
作者信息 +

Scaled model and test method for marine gas turbine mount system

  • WU Shuangshuang1,2, FENG Linhan2, ZHANG Lei2, YAN Ming1, WANG Teng2
Author information +
文章历史 +

摘要

关键部件冲击试验是舰用燃气轮机抗冲击设计的必要考核手段。针对某燃气轮机支架系统抗冲击试验问题,首先,采用相似理论与等效冲击相结合的方法,选取与支架系统动力特性相关的物理量并推出相似关系。其次,确定支架冲击试验材料并通过试验得到力学特性,分析其受到的载荷、固有频率及模态振型。最后,提出一种燃机支架系统的缩比试验模型及试验方法,并通过有限元模型进行模态分析和冲击仿真计算,验证了支架缩比试验模型与原模型的等效性。结果表明:缩比试验模型一阶、二阶固有频率与原模型的相对误差均在10%以内;相对位移响应误差为13.69%,绝对加速度响应误差为3.18%,相对误差均在20%内,满足工程要求。验证了支架系统缩比模型及试验方法的有效性,为燃机支架系统抗冲击试验提供技术支撑。

Abstract

The shock test of key components is a necessary means to evaluate the shock resistance design of marine gas turbine.Aiming at the shock resistance test of a gas turbine mount system,firstly,physical quantities related to the dynamic characteristics of the mount system were selected and the similarity relations were deduced by using the method of similarity theory and equivalent shock.Secondly,the shock test material was determined and the mechanical properties were obtained through the experiment.The load,natural frequency and modal shape were analyzed.Finally,a scaled test model and test method of a gas turbine mount system were proposed,and modal analysis and shock simulation were carried out by finite element model,which verified the equivalence between the scaled test model and the original.The results show that the relative errors of the first and second order natural frequencies of the scaled test model and the original are within 10%,the relative displacement response error is 13.69%,the absolute acceleration response error is 3.18%,and the relative errors are less than 20%,which meet the engineering requirements.The effectiveness of the scaled test model and test method is verified,which provides technical reference for the shock resistance test of the mount system.

关键词

支架系统 / 抗冲击试验 / 相似理论 / 等效冲击 / 缩比试验模型

Key words

mount system / shock resistance test / similarity theory / equivalent shock / scaled test model

引用本文

导出引用
武双双1,2,冯麟涵2,张磊2,闫明1,王腾2. 舰用燃气轮机支架缩比模型试验方法研究[J]. 振动与冲击, 2023, 42(9): 106-111
WU Shuangshuang1,2, FENG Linhan2, ZHANG Lei2, YAN Ming1, WANG Teng2. Scaled model and test method for marine gas turbine mount system[J]. Journal of Vibration and Shock, 2023, 42(9): 106-111

参考文献

[1] 闻雪友,任兰学,祁龙,等.舰船燃气轮机发展现状、方向及关键技术[J].推进技术,2020,41(11):2401-2407.
WEN Xueyou, REN Lanxue, QI Long, et al. De-velopment status, direction and key technologies of marine gas turbine[J]. Propulsion Technology, 2020,41(11):2401-2407.
[2] 尤国英,黄飞,吴群英.燃气轮机底架抗冲击非线性计算分析[J].热能动力工程,1996(S1):50-52.
YOU Guoying, HUANG Fei, WU Qunying. Nonl-inear calculation and analysis of shock resistanceof gas turbine bottom frame [J]. Thermal Power Engineering, 1996(S1):50-52.
[3] SHENG H, YUAN Z, YOU G, et al. Structural analysis and shock resistance calculation of a gasturbine module[C]// 3rd international marine engi-neering conference 1996:conference papers. Harbin Marine Boiler & Turbine Research Institute, Harbin,China,1996.
[4] XIE Z W, HE S H, WU X Y. Anti-shock optimi-zation of a certain gas turbine foundation by DDAM[J].Advanced Materials Research,2010,983:129-131.
[5] 尹家录,王相平,赵祥敏,等.舰船燃气轮机支撑系统结构设计及抗冲击计算分析[J].航空发动机,2011,37(03):12-14+33.
YIN Jialu, WANG Xiangping, ZHAO Xiangmin, et al. Structure design and anti-shock analysis of
the bracing system for marine gas turbine[J]. Aer-oplane Engine, 2011, 37(03):12-14+33.
[6] WANG P T, Chen G, G E. Simulation evaluationof warship gas turbine's shock resistance ability[J].Ship Science and Technology,2011.
[7] ZHANG A, ZHOU W, WANG S, et al. Dynamicresponse of the non-contact underwater explosionson naval equipment [J]. Marine Structures, 2011,24(4):396-411.
[8] 万强,吴新跃,谢最伟.某燃气轮机高压转子—涡轮抗冲击性能研究[J].机械设计与制造,2012(02):184-186.
WAN Qiang, WU Xinyue, XIE Zuiwei. Researchon anti-shock dynamical characteristics of the hi-gh pressure rotor-turbo of a turbine[J].MechanicalDesign and Manufacture,2012(02):184-186.
[9] JONES P G, CARMICHAEL S L. Auxiliary tur-bine generator set isolation system design for USnaval vessel[C]//Turbo Expo:Power for Land, Sea,and Air. American Society of Mechanical Engin-eers,2012,44717:209-215.
[10] 耿盼盼,刘永文.舰用燃气轮机抗冲击时域模拟研究[J].机械强度,2013,35(03):349-353.
GENG Panpan, LIU Yongwen.Study on time do-main simulation of ship gas turbine anti-shock[J].Mechanical Strength, 2013,35(03):349-353.
[11] 韩少燕.舰用燃机抗冲击分析方法与模型简化研究[D].大连理工大学,2015.
[12] 赵改敬.燃机抗冲击数值分析与支撑系统结构改进[D].大连理工大学,2016.
[13] 冯麟涵,汪玉,张磊.舰船设备抗冲击能力的可靠性分析[J].振动与冲击,2013,32(01):140-144.
FENG Linhan, WANG Yu, ZHANG Lei. Reliabi-lity analysis of anti-shock capability of warship e-quipment[J].Journal of Vibration and Shock, 2013,32(01):140-144.
[14] 韩璐,张明远,冯麟涵,等.基于冲击响应等效的燃机支撑结构冲击试验研究[J].振动与冲击,2020,39(18):242-247.
HAN Lu, ZHANG Mingyuan, FENG Linhan, et al. Impact test study of a gas turbine support str-ucture based on impact response equivalence[J]. Journal of Vibration and Shock, 2020,39(18):242-247.
[15] ZHAO S T, et al. Numerical investigation of dy-namic responses of ship structure and gas turbinesubjected to underwater explosion[J]. Journal of Ship Mechanics,2021,25(06):815-827.

PDF(1809 KB)

Accesses

Citation

Detail

段落导航
相关文章

/