计及套圈变形的电主轴角接触球轴承动刚度分析

PDF(6029 KB)

振动与冲击 ›› 2013, Vol. 32 ›› Issue (2) : 81-85.

论文

计及套圈变形的电主轴角接触球轴承动刚度分析

陈小安，刘俊峰，陈宏，周明红，单文桃

作者信息 +

Analysis on the dynamic stiffness of motorzied-spindle angular contact ball bearings considering the ferrule deformation

CHEN Xiao-an，LIU Jun-feng，CHEN Hong，ZHOU Ming-hong，SHAN Wen-tao

Author information +

文章历史 +

摘要

针对高速电主轴结构特点，应用弹性力学和滚动轴承动力学理论，建立考虑内圈弯曲变形影响的角接触球轴承动刚度分析模型，探讨不同工况下内圈的径向挠度及其对轴承动刚度的影响，最后在12MD60Y6型号电主轴上进行轴承动刚度测试。理论和实验结果表明，内圈径向挠度和轴承的轴向载荷成正比、与转速成反比，在重载条件下其值不容忽视。考虑内圈径向挠度的轴承动刚度计算结果更接近实验结果。

Abstract

According to the structural characteristics of high-speed motorized spindles, an analysis model of the dynamic stiffness for angular contact ball bearings, which takes into account the effects of the bending deformation of the inner ring, was set up by using the mechanics of elasticity and the dynamics of rolling bearings. In addition, the radial deflection of the inner ring under different operating conditions and its effect on the bearing dynamic stiffness were discussed. Finally, a test of the bearing dynamic stiffness was carried out on a 12MD60Y6 motorized spindle. The simulation and experimental results indicate that the radial deflection of the inner ring is directly proportional to the bearing axial load and inversely proportional to the rotational speed, and can not be ignored in heavy load condition. The results of the bearing dynamic stiffness considering the radial deflection of the inner ring have a better agreement with experimental values.

导出引用

陈小安;刘俊峰;陈宏;周明红;单文桃. 计及套圈变形的电主轴角接触球轴承动刚度分析[J]. 振动与冲击, 2013, 32(2): 81-85

CHEN Xiao-an;LIU Jun-feng;CHEN Hong;ZHOU Ming-hong;SHAN Wen-tao. Analysis on the dynamic stiffness of motorzied-spindle angular contact ball bearings considering the ferrule deformation[J]. Journal of Vibration and Shock, 2013, 32(2): 81-85