Research on Sensor Placement Optimization Method in Environmental Vibration Test

PDF(1473 KB)

Journal of Vibration and Shock ›› 2013, Vol. 32 ›› Issue (8) : 158-161.

论文

Research on Sensor Placement Optimization Method in Environmental Vibration Test

LI Qi-zhi[1] [2],CHEN Guo-ping[1] WANG Kai[3]

Author information +

History +

Abstract

In order to obtain the optimal acceleration sensor location, on the basis of electric vibration multipoint control principle and the characteristics of fixture transfer function, the sensor placement optimization calculation model was established. A fixture was taken for example to establish the finite element model and NASTRAN software was used to get the transfer function, then an optimal sensor location was obtained according to the optimization model previously mentioned. Finally, the response of connection site between fixture and test sample was measured by fixture vibration test. The test results indicated that the mean square deviation of response coming from optimization method was significantly smaller than that coming from the traditional method. It was proved that the optimization method is practical and feasible, and the optimization method can provide theory and practice guidance for sensor placement and vibration fixture design in environmental vibration test.

Key words

environmental vibration test / feedback control / acceleration sensor / optimal layout

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

LI Qi-zhi[] [];CHEN Guo-ping[] WANG Kai[]. Research on Sensor Placement Optimization Method in Environmental Vibration Test[J]. Journal of Vibration and Shock, 2013, 32(8): 158-161