A new method to identify the dynamic characteristics of bolted joints

LI Ling;CAI An-jiang;CAI Li-gang;RUAN Xiao-guang;GUO Tie-neng

Journal of Vibration and Shock ›› 2014, Vol. 33 ›› Issue (14) : 15-19.

PDF(1798 KB)
PDF(1798 KB)
Journal of Vibration and Shock ›› 2014, Vol. 33 ›› Issue (14) : 15-19.
论文

A new method to identify the dynamic characteristics of bolted joints

  • LI Ling1,2,CAI An-jiang1,CAI Li-gang 2,RUAN Xiao-guang1,GUO Tie-neng2
Author information +
History +

Abstract

General method is directly used the measured frequency response functions (FRFs) to identify the characteristics of bolted joints. However, the system’s ill-posed problems arise from the measurement error, the noise effect and the measurement at the mechanical joints may be obstructed by joining mechanisms. A new identification method with FRFs is developed to avoid the ill-posed problem. Firstly, the whole structure composed of substructures and bolted joints finite element model is established, the value range of equivalent stiffness and equivalent damping are obtained by the relationship between the parameters of bolted joints and the normalized frequency. The averages of the value range of equivalent stiffness and equivalent damping are used for the initial value of the bolted joints model, using the minimal FRFs calculation error of experiment and simulation as the objective. Finally, the equivalent stiffness and equivalent damping of bolted joints are obtained. From the results of simulation, experiment and Ref [16], results show that the proposed method can significantly improve the accuracy of identification.

Key words

bolted joints / parameters identification / frequency response function / ill-posed problem

Cite this article

Download Citations
LI Ling;CAI An-jiang;CAI Li-gang;RUAN Xiao-guang;GUO Tie-neng. A new method to identify the dynamic characteristics of bolted joints[J]. Journal of Vibration and Shock, 2014, 33(14): 15-19
PDF(1798 KB)

Accesses

Citation

Detail

Sections
Recommended

/