Unbalance response for 1000MW ultra supercritical turbine with single bearing support

PDF(1742 KB)

Journal of Vibration and Shock ›› 2014, Vol. 33 ›› Issue (14) : 201-205.

论文

Unbalance response for 1000MW ultra supercritical turbine with single bearing support

GAO Qing-shui1，DENG Xiao-wen1，ZHANG Chu1，LIU Shi1，YANG Jian-gang2

Author information +

History +

Abstract

The finite element model to calculate unbalance response for a 1000 MW ultra supercritical turbine with single bearing support was set up. Unbalance response during run up process was calculated and analyzed. Response difference between single-bearing support unit and double-bearing support unit was compared. It is pointed out that bearings at two sides of the rotor can be treated as the double supports of the rotor. Unbalance plane and unbalance mode can be analyzed from vibration of these bearings. Vibration coupling between rotors is large exists especially at rotor resonance zone. If operation speed is far away from critical speeds, the coupling effect is not distinct. Phase lag between the coupling unbalance and vibration at operation speed is usually larger than 120 degree though the 2nd critical speed is far less than the operation speed. High speed dynamic balance test was done for a 1000 MW unit in field. The calculated results were verified.

Key words

turbine / vibration / balance / rotor

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

GAO Qing-shui;DENG Xiao-wen;ZHANG Chu;LIU Shi;YANG Jian-gang. Unbalance response for 1000MW ultra supercritical turbine with single bearing support[J]. Journal of Vibration and Shock, 2014, 33(14): 201-205