Milling parameters optimization method based on studying cutting tool deformation

CHI Yu-lun;LI Hao-lin

Journal of Vibration and Shock ›› 2014, Vol. 33 ›› Issue (20) : 86-90.

PDF(1136 KB)
PDF(1136 KB)
Journal of Vibration and Shock ›› 2014, Vol. 33 ›› Issue (20) : 86-90.
论文

Milling parameters optimization method based on studying cutting tool deformation

  • CHI Yu-lun,LI Hao-lin
Author information +
History +

Abstract

The machine tool deformation is one of important factors which affect the workpiece surface quality. The paper proposed a method to optimize the milling parameters based on dynamic stiffness measurement and milling force model. The machine tool dynamic stiffness is obtained by step response experiment, and the milling force model coefficient is defined through orthogonal experiment. At last, the paper designed the tool online measurement and the milling force online measurement setup to verify the optimized parameters, and its validity and feasibility are proved.

Key words

milling / tool deformation / parameters optimization / experiment design

Cite this article

Download Citations
CHI Yu-lun;LI Hao-lin. Milling parameters optimization method based on studying cutting tool deformation[J]. Journal of Vibration and Shock, 2014, 33(20): 86-90
PDF(1136 KB)

660

Accesses

0

Citation

Detail

Sections
Recommended

/