Dynamic modeling of micro-endmill based on Timoshenko beam theory

FANG Ze-ping;WANG Xi-bin;LIU Zhi-bing;CHEN Ming;XU Zong-wei

Journal of Vibration and Shock ›› 2014, Vol. 33 ›› Issue (23) : 111-115.

PDF(1708 KB)
PDF(1708 KB)
Journal of Vibration and Shock ›› 2014, Vol. 33 ›› Issue (23) : 111-115.
论文

Dynamic modeling of micro-endmill based on Timoshenko beam theory

  • FANG Ze-ping1,WANG Xi-bin1,LIU Zhi-bing1,CHEN Ming2,XU Zong-wei3
Author information +
History +

Abstract

A dynamic model for the over-hang part of the micro-endmill is proposed, which comprehensively considered the shear deformations and rotary inertia effect arising from the nature of the micro-endmill by using the theory of Timoshenko beam. The convergence behavior of the built model is analysed, and its accuracy is verified by experiment, and the applicability of the model is proved by comparing with the calculated results from finite element method and the Euler beam theory. Based on the developed model, the effect of the tool tip diameter, tip section aspect ratio and semi-taper angle on the natural frequencies of micro-endmill are studied. The proposed model enables better parametric design and optimization of micro-endmill for excellent dynamic performance.

Key words

Micro-endmill / Dynamic modeling / Timoshenko beam / Natural frequency

Cite this article

Download Citations
FANG Ze-ping;WANG Xi-bin;LIU Zhi-bing;CHEN Ming;XU Zong-wei. Dynamic modeling of micro-endmill based on Timoshenko beam theory[J]. Journal of Vibration and Shock, 2014, 33(23): 111-115
PDF(1708 KB)

Accesses

Citation

Detail

Sections
Recommended

/