Research on the Design Methods of Specimens Damped Both SidesUsed in the Measurement of Viscoelastic Damping Material’s Mechanics Parameters

WANG Chao;LÜZhen-hua

Journal of Vibration and Shock ›› 2014, Vol. 33 ›› Issue (5) : 102-108.

PDF(1818 KB)
PDF(1818 KB)
Journal of Vibration and Shock ›› 2014, Vol. 33 ›› Issue (5) : 102-108.
论文

Research on the Design Methods of Specimens Damped Both SidesUsed in the Measurement of Viscoelastic Damping Material’s Mechanics Parameters

  • WANG Chao, LÜ Zhen-hua
Author information +
History +

Abstract

The specimens with supplemental structural damping at both sides are frequently used in the measurement of viscoelastic material’s mechanics parameters through flexural resonating cantilever beam method(FRCBM). Appropriate design of specimens decides the accuracy of experimental results. Though sensitivity analysis, influence coefficient was proposed and used in the analysis of experimental results which were affected by the measurement accuracy of thickness ratio, resonance frequency ratio, density ratio and loss factor of the specimen, and some significant technical specifications were proposed to help design the specimens. Finally, the applicability of the specimens damped both sides used in the measurement of mechanics parameters through FRCBM was analyzed.


Key words

viscoelastic material / specimen design / influence coefficient / sensitivity analysis / structural damping

Cite this article

Download Citations
WANG Chao;LÜZhen-hua. Research on the Design Methods of Specimens Damped Both SidesUsed in the Measurement of Viscoelastic Damping Material’s Mechanics Parameters[J]. Journal of Vibration and Shock, 2014, 33(5): 102-108
PDF(1818 KB)

835

Accesses

0

Citation

Detail

Sections
Recommended

/