Modified Polynomial Model of Magnetorheological Damper and Model Verification

ZHOU Tieming;CHEN Enwei;LU Yimin;LIU Zhengshi;CHEN Wuwei

Journal of Vibration and Shock ›› 2014, Vol. 33 ›› Issue (7) : 221-226.

PDF(2576 KB)
PDF(2576 KB)
Journal of Vibration and Shock ›› 2014, Vol. 33 ›› Issue (7) : 221-226.
论文

Modified Polynomial Model of Magnetorheological Damper and Model Verification

  • ZHOU Tieming, CHEN Enwei,LU Yimin, LIU Zhengshi, CHEN Wuwei
Author information +
History +

Abstract

In order to better use the magnetorheological damper in the semi-active vibration control of magnetorheological damper coupling system, an accurate dynamic model of magnetorheological damper need to be established. Existing polynomial model of magnetorheological damper can fit the damping force-velocity curve accurately, but high-order polynomial fitting will lead to Runge phenomenon and violently oscillation at both ends of the fitting curve. To eliminate the Runge phenomenon, a piecewise cubic polynomial model is proposed in this paper and its parameters are identified by least square method. Compared with the experimental data, the piecewise cubic polynomial model can fit the damping force-velocity moer accurately and eliminate the Runge phenomenon.

Key words

Magnetorheological Damper / Polynomial Model / Least Square Method / Parameter identification

Cite this article

Download Citations
ZHOU Tieming;CHEN Enwei;LU Yimin;LIU Zhengshi;CHEN Wuwei. Modified Polynomial Model of Magnetorheological Damper and Model Verification[J]. Journal of Vibration and Shock, 2014, 33(7): 221-226
PDF(2576 KB)

690

Accesses

0

Citation

Detail

Sections
Recommended

/