A study of bimetallic rib-reinforced plate made by explosive welding experiment and its interface

PDF(1863 KB)

Journal of Vibration and Shock ›› 2015, Vol. 34 ›› Issue (15) : 140-144.

Mianjun Duan 1, Yaohua Wang1, Hong Ran2, Jingrong Zhou 3, Rui Ma 1, Jiang Runlian 1

Author information +

History +

Abstract

In this study, an experimental set-up was designed for manufacture of a bimetallic rib-reinforced plate. There are three key sections in the fabrication process including the mold filling, the form of explosive charge and the welding parameter optimization. The bonding interfaces of the rib-reinforced plate were observed and analyzed by means of optical microscope (OM), scanning electron microscope (SEM) and mechanics testing. It is found that the welding interfaces are micro wave; and grains near the interface are lengthened, microharness of the grains is higher than other erea; the interfaces have a high strength compare with that of parent metal.

Key words

Explosive welding / bimetallic / rib-reinforced plate / interface

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

Mianjun Duan 1, Yaohua Wang1, Hong Ran2, Jingrong Zhou 3, Rui Ma 1, Jiang Runlian 1. A study of bimetallic rib-reinforced plate made by explosive welding experiment and its interface[J]. Journal of Vibration and Shock, 2015, 34(15): 140-144

References

[1] 郑哲敏, 杨振声. 爆炸加工[M]. 北京：国防工业出版社, 1981：402.
Zheng Zhemin, Yang Zhensheng. Explosive processing [M]. Beijing: National Defense Industry Press, 1981:402.
[2] 邵炳璜, 张凯. 爆炸焊接原理及其工程应用[M]. 大连: 大连理工大学出版社. 1987: 11.
Shao Binghuang, Zhang Kai. Explosive Welding Engineering Principles and Their Application [M]. Dalian: Dalian University of Technology Press, 1987: 11.
[3] Ezra AA（张铁生等译）.金属爆炸加工原理与实践[M] .北京：国防工业出版社，1981.
Ezra AA (Zhang Tiesheng translated). Explosive metal Machining Theory and Practice [M] Beijing: National Defence Industry Press, 1981.
[4] Blazynski T Z. Explosive Welding, Forming and Compaction[M]. London: Applied Science, 1983: 226.
[5] Crossland B. Explosive Welding of Metals and Its Applications [M]. Oxford: Clarendon Press. 1982: 248.
[6] 王耀华, 金属板材的爆炸焊接研究与实践[M]. 北京：国防工业出版社. 2007: 135.
Wang Yaohua. Research and Practice of Explosive Welding Sheet Metal [M] Beijing: National Defense Industry Press, 2007: 135.
[7] 郭佑雄，赵福兴，周祖容.滑移爆-轰作用下飞板的运动规律研究—双P-M 法[J].爆炸与冲击,1998,18(2):123-130.
Guo Youxiong, Zhao Fuxing, Zhou Zurong. slip explosion - The movement under the law of the role of flying bombers board - Dual PM Method [J] Explosion and Shock, 1998,18 (2) :123-130.
[8] 史长根,洪津,刘影等.爆炸焊接装药厚度可焊性窗口[J].焊接学报,2011,32(6)：61-64.
Shi changgen, Hong Jin, Liu Ying, etc. charge explosive welding thickness weldability window [J]. Welding Journal, 2011,32 (6) :61-64.
[9] 杨扬．钛/钢爆炸复合界面的微观组织结构和力学行为[J]．材料导报，1994，8（5）：33-36.
Yang Yang. Titanium microstructure and mechanical behavior / steel explosive composite interface [J]. Materials Review, 1994,8 (5) :33-36.
[10] 闫鸿浩，李晓杰，王金相等. 多层非晶态薄带爆炸焊接窗口的特殊性[J].爆炸与冲击，2003，23（增刊）：261-262.
Yan Haohao, Li Xiaojie, Wang Jingxiang, etc. Particularity explosive welding window multilayer amorphous thin strip [J]. Explosion and Shock, 2003,23 (Suppl) :261-262.
[11] K.Hokamoto,M.Fujita,H.Shimokawa,ect. A new method for explosive welding of Al/ZrO2 joint using regulated underwater shock wave [J].Mater Proce Techn, 1999, 85:175-179.
[12] 郑远谋. 爆炸焊接和爆炸复合材料的原理及应用[M]. 长沙：中南大学出版社.2007,1.
Zheng Yuanmou. Principles and Applications of explosive welding and explosive composites [M] Changsha: Central South University Press .2007,1.
[13] Mendes R, Ribeiro J.B, Loureiro A. Effect of explosive Characteristics on the explosive welding of stainless steel to carbon steel in cylindrical configuration [J]. Materials and Design, 2013, 51：182-192.
[14] 陈晓强，张可玉，周方毅等．水下爆炸焊接钢管的试验研究[J]．热加工工艺，2007，36（19）：40-41.
Chen Xiaoqiang, Zhang Keyu, Zhou Fangyi, etc. Experimental study of underwater explosion welded steel [J]. Thermal processing, 2007,36 (19) :40-41.