Vibration analysis of rock under impact load based on renormalization method

PDF(1942 KB)

Journal of Vibration and Shock ›› 2016, Vol. 35 ›› Issue (16) : 49-54.

Li Wei1, Ji Zhaosheng1，DONG Zhiyu2,LI Zhoulun1,LI Yue1

Author information +

History +

Abstract

Rotary percussion drilling is currently most used efficient rock breaking technology in deep hard formations drilling and the effect is remarkable. Based on vibration theory and the consideration of the gravity of rack, the mathematical model of rock vibration under impact load was established. Renormalization method was used to get the solution and MATLAB software was used to analyze the influence of various parameters on the vibration of the rock. Finally, laboratory experiments were conducted to verify the analytical results. Research shows: The movement of rack under drill bit’s impact is mutual interference vibration between two harmonic vibration. The vibration amplitude of rock as well as the vibration velocity becomes larger with the decrease of rock density, the decrease of rock stiffness and the increase of the impact force. There is an inherent frequency of rock. Vibration of rock becomes more intense with the decrease of the difference between impact frequency and the inherent frequency. When high impact frequency equals to the inherent frequency, the vibration amplitude and vibration velocity reach the largest and this is resonance. For revealing the crushing mechanism of rock under dynamic load and guiding the design of impact tools, analysis of the response of rock under impact loads is of great significance.

Key words

Rotary percussion drilling / Rock vibration / Amplitude-frequency characteristics / Resonance

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

Li Wei1, Ji Zhaosheng1，DONG Zhiyu2,LI Zhoulun1,LI Yue1. Vibration analysis of rock under impact load based on renormalization method[J]. Journal of Vibration and Shock, 2016, 35(16): 49-54

References

[1] 常德玉，李根生，沈忠厚，等. 深井超深井井底应力场[J]. 石油学报，2011，32(4)：697-703．
CHANG De-yu, LI Gen-sheng, SHEN Zhong-hou, et al. The stress field of bottom hole in deep and ultra-deepwells[J]. Acta Petrolei Sinica, 2011, 32(4): 697-703．
[2] 祝效华，汤历平，童华. 高频扭转冲击钻进的减振与提速机理研究[J]. 振动与冲击，2012，31(20)：75-78.
Zhu Xiaohua, Tang Liping, Tong Hua. Rock breaking mechanism of a high frequency torsional impact drilling[J]. Journal of Vibration and Shock, 2012, 31(21): 75-78.
[3] Li Wei, Yan Tie, Li Siqi, et al. Rock Fragmentation Mechanisms and an Experimental Study of Drilling tools during High-frequency Harmonic Vibration[J]. Petroleum Science, 2013, 10(2): 205-211.
[4] Romulo R. Aguiar, Hans I. Weber. Development of a vibroimpact device for the resonance hammer drilling[J]. Proceedings of the XII International Symposium on Dynamic Problems of Mechanics, 2007.
[5] 熊继有，钱声华，严仁俊，等. 钻井高效破岩新进展[J]. 天然气工业，2004，24(04)：27-29.
XIONG Ji-you, QIAN Sheng-hua, YAN Ren-jun, et al. New progress of high efficiency of drilling[J]. Natural gas industry, 2004, 24(04): 27-29.
[6] 雷鹏，倪红坚，王瑞和，等．自激振荡式旋转冲击钻井工具水力元件性能分析与优化[J]．振动与冲击，2014，33(19)：175-180+198.
LEI Peng, NI Hong-jian, WANG Rui-he, et al. Performance analysis and optimization for hydraulic components of self-oscillating rotary impact drilling tool[J]. Journal of vibration and shock, 2014, 33(19): 175-180+198.
[7] Li Siqi, Yan Tie, Li Wei, et al. Modeling of vibration response of rock by harmonic impact[J]. Journal of Natural Gas Science and Engineering, 2015, 23: 90-96.
[8] 文平，陈波，雷巨鹏，等．液动冲击旋转钻井技术在玉门青西油田的应用[J]．天然气工业，2004，24(09)：64-67+9.
WEN Ping, CHEN Po, LEI Ju-peng, et al. Application of hydraulic impact rotary drilling technology in Qingxi Oilfield[J]. Natural gas industry, 2004, 24(09): 64-67+9
[9] 姚晔，徐宝富，陆敏恂. 低频大振幅液压冲击器的建模和分析方法[J]. 同济大学学报，1999，27(6)：741-744.
YAO Ye, XU Bao-fu, LU Min-xun. Modeling and analytic method of low frequency and large amplitude hydraulic shocker[J]. Journal of Tongji University, 1999, 27(6): 741-744.
[10] Marian Wiercigroch, Anton M. Krivtsov, Jerzy Wojewoda. Vibrational energy transfer via modulated impacts for percussive drilling[J]. Journal of Theoretical and applied mechanics, 2008, 46(3): 715-726.
[11] 金解放，李夕兵，王观石，等．循环冲击载荷作用下砂岩破坏模式及其机理[J]．中南大学学报民（自然科学版），2012，43(4)：1453-1460.
JIN Jie-fang, LI Xi-bing, WANG Guan-shi, et al. Failure modes and mechanisms of sandstone under cyclic impact loadings[J]. Journal of Central South University, 2012, 43(4): 1453-1460.
[12] 宋义敏，杨小彬，金璐，等．冲击载荷作用下岩石I型裂纹动态断裂试验研究[J]．振动与冲击，2014，33（11）:49-53.
SONG Yi-min, YANG Xiao-bin, JIN Lu, et al. Dynamic fracture test for rock I-type crack under impact load[J]. Journal of vibration and shock, 2014, 33(11): 49-53.
[13] 李玮，闫铁，张志超，等. 高频振动钻具冲击下岩石响应机理及破岩试验分析[J]. 石油钻探技术，2013，41(06)：25-28.
LI Wei, YAN Tie, ZHANG Zhic-hao, et al. Rock response mechanism and rock breaking test analysis for impact of high frequency vibration drilling tool[J]. Petroleum Drilling Techniques, 2013, 41(6): 25-28．
[14] 赵伏军，李夕兵，冯涛，等. 动静载荷耦合作用下岩石破碎理论分析及试验研究[J]. 岩石力学与工程学报，2005，24(08)：1315-1320.
ZHAO Fu-jun, LI Xi-bing, FENG TAO, et al. Theoretical analysis and experimental study on the fracture of the rock under static and dynamic loads[J]. Chinese journal of rock mechanics and engineering, 2005, 24(08): 1315-1320
[15] 陶兴华，张建龙，曾义金. 石油旋冲钻井技术研究及应用[J]. 石油钻采工艺，1998，20(02)：27-30+112.
TAO Xing-hua, ZHANG Jian-long, ZENG Yi-jin. Study and Application of Rotary Percussion Drilling Technology[J]. Oil Drilling & Production Technology, 1998, 20(02): 27-30+112.
[16] 柴立和. 重整化方法及其应用的研究进展[J]. 现代物理知识，2005，17(02)：32-35.
CHAI Li-he. Progress in reforming method and its applications[J]. Modern Physics, 2005, 17(02): 32-35.