Influence of the Force Load on the Resonance Frequency and Resonance Impedance of the Ultrasonic Cutting Acoustic System

Ji Huawei Yu Wenze Hu Xiaoping

Journal of Vibration and Shock ›› 2016, Vol. 35 ›› Issue (23) : 136-141.

PDF(961 KB)
PDF(961 KB)
Journal of Vibration and Shock ›› 2016, Vol. 35 ›› Issue (23) : 136-141.

Influence of the Force Load on the Resonance Frequency and Resonance Impedance of the Ultrasonic Cutting Acoustic System

  •   Ji Huawei   Yu Wenze  Hu Xiaoping
Author information +
History +

Abstract

The ultrasonic cutting system will be out of harmony, insufficient harmony, or non-resonance when the force is loaded on, it has serious impact on the machining process and the machining quality of the workpiece. In this paper, the impedance and the resonance frequency of the force loaded acoustic system were studied. By using terminal network method, Input / output characteristics of ultrasonic horn, piezoelectric ceramics and end cover were studied, the integral design equation of the acoustic system was presented, and the impedance, frequency equation and the relationship among load, current and amplitude of the acoustic system were obtained. In order to get influence law of force on impedance and resonant frequency, a digital push pull meter was applied to load a single direction force to the acoustic system, the relationship among the impedance, resonant frequency and force was tested by experiments. Experimental results show that the impedance of the system is increased after three directions are loaded on. With the increase in loaded force, the impedance of ultrasonic cutting system loaded Y and Z direction force increases faster than that of the X direction, the increase in resonant frequency of ultrasonic cutting system loaded X and Z direction force is much more than that of Y direction, we should reduce the force of the sensitive direction in practical application. The research results of this paper can provide theoretical guidance for the actual processing.

Key words

ultrasonic cutting system / loaded force / load model / impedance / resonance frequency

Cite this article

Download Citations
Ji Huawei Yu Wenze Hu Xiaoping. Influence of the Force Load on the Resonance Frequency and Resonance Impedance of the Ultrasonic Cutting Acoustic System[J]. Journal of Vibration and Shock, 2016, 35(23): 136-141

References

[1] 高军,崔巍. 超声切割技术在复合材料加工领域的应用[J]. 航空制造技术,2008,(04):50-52.
   Gao Jun,Cui wei. Ultrasonic cutting technology applying in the field of composite material processing [J]. Aeronautial Manufacturing Technology,2008,(04):50-52.
[2] 贺西平,高杰. 超声变幅杆设计方法研究[J]. 声学技术, 2006.25(01):82-86.
   He Xiping, Gao Jie. A review of ultrasonic solid horn design[J]. Technical acoustics, 2006,25(01):82-86.
[3] 黄德中. 超声波振动器四端网络设计[J]. 振动与冲击, 2005,24(05): 110-111.
   Huang Dezhong. Design of ultrasonic vibrator using four-end network method[J]. Journal of Vibration And Shock.2005,24(05):110-111.
[4] 曾凡冲. 超声换能器的设计理论研究[D]. 北方工业大学, 2013.
   Zeng Fanchong. The study on the design theory of ultrasonic thansducer[D]. North China University of Technology, 2013.
[5] 赵福令,冯冬菊,郭东明等. 超声变幅杆的四端网络法设计[J]. 声学学报, 2002,27(06): 554-558.
   Zhao Fuling, Feng Dongju. Design of horn using four-endnetwork method[J]. Acta Acustica. 2002,27(06):554-558.
[6] Kei Harada, Hiroyuki. Effect of dynamic response and displacement/stress amplitude on oltrasonic vibration cutting[J]. Journal of materials processing technology, 2009,209:4490-4495.
[7] Li Zhang, Jingyan Dong, Paul H.Cohen. Material-insensitive feature depth control and machining force reductionby ultrasonic vibration in AFM-Based nanomachining[J]. IEEE transactions on nanotechnology, 2013,12(5):743-750.
[8] Efim Sh.Statnikov, Oleg V.Korolkov, Vladimir N.Vityazev. Physics and mechanism of ultrasonic impact[J]. Ultrasonics, 2006,44:533-538.
[9] X.J,Zhu, J.Q.Wang, Q.Cheng, Z.M.Lu. Research on dynamic grinding force in ultrasonic honing chatter[J]. Key Engineering Material,2011,487:433-437.
[10] 张云电,喻家英,王纯. 珩磨负载对超声珩磨振动系统谐振频率的影响[J].声学学报,1994,14(05):367-371.
   Zhang Yundian, Yu Jiaying, Wang Chun. Influence of honing load on resonance frequency of ultrasonic honing vibration system[J]. Acta Acustica,1994,14(05):367-371.
 [11] 李 华,任 坤,殷 振,等.纵弯转换球面超声振动聚焦系统谐振特性研究[J].振动与冲击,2015,34(6):183-188.
LI Hua, REN Kun, YIN Zhen,et al.Resonance features of a new ultrasonic vibration focusing system based on longitudinal-flexural vibration conversion[J].Journal of Vibration and Shock,2015,34(6):183-188.
[12] 赵波,刘折,靳宇晖. 负载对超声加工声学系统特性的影响[J]. 航空精密制造技术. 2012,48(01): 10-13.
Zhao bo, Liu Zhe,Jin Yuhui. Study on influence of load on acoustic system characteristics of ultrasonic machining[J]. Aviation Precision Manufacturing Technology. 2012,48(01):10-13.
[13]尹晓春,谢欣平,田阿利. 考虑负载影响的阶梯形超声变幅杆动力特性[J]. 振动与冲击. 2012,31(04): 157-161.
   Yi Xiaochun, Xie Xinping, Tian Eli. Dynamical performance of ultrasonic stepped horn with consideration of lo ding effect[J]. Journal of Vibration And Shock. 2012,31(04):157-161.
[14]于伟,阎长罡,李伟. 抗性负载的余弦形复合变幅杆设计及动力学特性研究[J]. 机床与液压. 2011,39(13): 13-16.
   Yu Wei, Yan Changgang, Li Wei. Design and dynamical analysis on a cylindrical and cosine composite horn with reactive load[J]. Machine Tool &Hydraulics. 2011,39(13):13-16.
[15]林书玉,姚文苇.阻性负载超声变幅杆振动特性研究[J]. 声学技术. 2006,25(05): 494-498.
   Lin Shuyu, Yao Wenwei. Characteristics of ultrasonic  horn with resistance load[J]. Technical Acoustics.2006, 25(05):494-498.
PDF(961 KB)

524

Accesses

0

Citation

Detail

Sections
Recommended

/