Vibration analysis of the roller linear guide with the rail displacement fluctuation error

Liu Zhi-feng1,Cai Li-gang1, Li Dan-dan1,Zhao Yong-sheng1, Ma Tong-min1

Journal of Vibration and Shock ›› 2016, Vol. 35 ›› Issue (23) : 23-28.

PDF(1118 KB)
PDF(1118 KB)
Journal of Vibration and Shock ›› 2016, Vol. 35 ›› Issue (23) : 23-28.

Vibration analysis of the roller linear guide with the rail displacement fluctuation error

  • Liu Zhi-feng1,Cai Li-gang1, Li Dan-dan1,Zhao Yong-sheng1, Ma Tong-min1
Author information +
History +

Abstract

The rail displacement fluctuation error with time-varying stiffness and damping in the vertical direction was considered a displacement excitation of a linear guide in the process of movement, and vibration analysis of the roller linear guide under the rail displacement excitation was studied. First, investigate the dynamic characteristics of the roller linear guide: the vertical stiffness was calculated according to Hertz contact theory, and the damping characteristics under different frequencies was identified based on hysteresis loop test of a linear guide unit. Then a generalized time-varying stiffness and damping dynamic model of the roller linear guide was formulated. Introduce the incremental harmonic balance method (IHB) of nonlinear vibration theory to analyze the vibration progress. The numerical simulation was used to confirm the feasibility of the approach.

Key words

 roller linear guide / displacement fluctuation error / nonlinear vibration / damping / the incremental harmonic balance method

Cite this article

Download Citations
Liu Zhi-feng1,Cai Li-gang1, Li Dan-dan1,Zhao Yong-sheng1, Ma Tong-min1. Vibration analysis of the roller linear guide with the rail displacement fluctuation error[J]. Journal of Vibration and Shock, 2016, 35(23): 23-28

References

[1] Otsuka J,Masuda T.The influence of nonlinear spring behavior of rolling elements on ultra-precision positioning control systems[J].Nanotechnology, 1988, (9):85-92.
[2] 周传宏,孙健利,杨叔子.滚动直线导轨副的振动模型研究[J].机械设计, 1999, (2):21-24.
ZHOU Chuan-hong, SUN Jian-li, YANG Shu-zi..A study on the vibration model of rolling linear guiding pairs [J].Jixie Sheji, 1999, (2):21-24.
[3]毛宽民,李斌,谢波,等.滚动直线导轨副可动结合部动力学建模[J].华中科技大学学报, 2008, 36(8):85-88.
MAO Kuan-min, LI Bin, XIE Bo, et al.Dynamic modeling of the movable joint on rolling linear guide[J].Journal of Huazhong University of Science & Technology, 2008, 36(8):85-88.
[4]孙伟,鲁明,汪博,等. 基于拉格朗日方程的直线滚动导轨系统解析建模[J].计算机集成制造系统, 2012, 18(4):781-786
SUN Wei, LU Ming, WANG Bo, et al.Analytical modeling of linear rolling guide systems based on Lagrange equation[J].Computer Integrated Manufacturing Systems, 2012, 18(4):781-786.
[5]罗继伟,罗天宇.滚动轴承分析计算与应用[M].北京:机械工业出版社, 2009.
LUO Ji-wei, LUO Tian-yu. Analysis and application of rolling bearing[M], BEIJING:china machine press,2009.
[6] 孙伟,鲁明,汪博,等.直线滚动导轨动力学特性分析方法研究[J].制造技术与机床, 2011, (3):48-52.
SUN Wei, LU Ming, WANG Bo, et al.Research on analysis method of dynamic characteristics for liner rolling guide [J].Manufacturing Technology & Machine Tool, 2011, (3):48-52.
[7] Lau S L, Zhang W S.Nonlinear vibrations of piecewise-linear system by incremental harmonics balance method[J].ASME Journal of Applied Mechanics, 1992, (59):153-160.
[8]Xu L,Lu M W,Cao Q.Nonlinear vibrations of dynamical systems with a general form of piecewise-linear viscous damping by incremental harmonic balance method[J].Physical Letters A, 2002, 301(1-2):65-73.
[9] 陈数辉.强非线性振动系统的定量分析方法[M]. 北京:科学出版社, 2006.
CHEN Shu-hui.Quantitative analysis of strongly nonlinear vibration system [M]. Bei Jing: Science Press, 2006.
[10]Gyungho K, Chun H P, Eiji S, Seung W K.Prediction and compensation of motion accuracy in a linear motion bearing table[J].Precision Engineering, 2011, 35(3):393-399.
[11]李磊,张建润,刘洪伟.直线滚动导轨副动态特性分析[J].振动与冲击., 2012, 31(18):111-114.
LI Lei, ZHANG Jian-run, LIU Hong-wei.Dynamic characteristics of a linear motion guide[J].Journal of vibration and shock, 2012, 31(18):111-114.
[12]张广鹏,史文浩,黄玉美.机床导轨结合部的动态特性解析方法及其应用[J].机械工程学报, 2002, 38(10):114-117.
ZHANG Guang-peng,SHI Wen-hao,HUANG Yu-mei.Analysis method of dynamic behaviors of guideway joint and its application in machine tools design[J].Chinese Journal of Mechanical Engineering, 2002, 38(10):114-117.
[13]陈学前,杜强,冯加权.螺栓连接非线性振动特性研究[J].振动与冲击, 2009, 28(7):196-198.
CHEN Xue-qian,DU Qiang,FENG Jia-quan.Nonlinear vibrational characteristic of bolt-joints[J].Journal of Vibration and Shock, 2009, 28(7):196-198.
PDF(1118 KB)

476

Accesses

0

Citation

Detail

Sections
Recommended

/