Design and performance test of planar spring with four permanent magnet structure of vibration energy collector

CHEN Ren-wen, XU Dong-xia, REN Long, XIA Hua-kang

Journal of Vibration and Shock ›› 2016, Vol. 35 ›› Issue (24) : 66-72.

PDF(2547 KB)
PDF(2547 KB)
Journal of Vibration and Shock ›› 2016, Vol. 35 ›› Issue (24) : 66-72.

Design and performance test of planar spring with four permanent magnet structure of vibration energy collector

  • CHEN Ren-wen, XU Dong-xia, REN Long, XIA Hua-kang
Author information +
History +

Abstract

A kind of planar spring with four permanent magnet structure of vibration energy collector is designed based on the vibration and electromagnetic theories. The vibration picking system and energy conversion system of the structure are analyzed through theory and simulation. The overall design of the subsequent interface circuit is discussed and the corresponding circuits are optimized by simulation. The performance of the device is tested by experiment to verify its validity and reliability. Experiment results show that the interface circuit output voltage can reach to 9V within 0.25s. Then, the voltage comparison circuit generates a trigger signal to turn on analog switch so that the devices can work normally,which verifies the reliability of the system.
 

Key words

vibration energy harvesting / dynamic analysis / electromagnetic analysis / circuit simulation / experimental verification

Cite this article

Download Citations
CHEN Ren-wen, XU Dong-xia, REN Long, XIA Hua-kang. Design and performance test of planar spring with four permanent magnet structure of vibration energy collector[J]. Journal of Vibration and Shock, 2016, 35(24): 66-72

References

[1] 陈仁文. 新型环境能量采集技术[M]. 北京:国防工业出版社,2011.
Chen Ren-wen.New Ambient Energy Harvesting Technology, National Defence Industry Press, 2011.
[2] Stephen N G. On energy harvesting from ambient vibration[J]. Journal of sound and vibration, 2006, 293(1): 409-425.
[3] Erturk A, Renno J M, Inman D J. Piezoelectric energy harvesting from an l-shaped beam-mass structure[C]//The 15th International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics, 2008: 69280I-69280I-15.
[4] Kim S, Clark W W, Wang Q M. Piezoelectric energy harvesting using diaphragm structure[C]//Smart Structures and Materials. International Society for Optics and Photonics, 2003: 307-318.
[5] 侯志伟, 陈仁文, 刘祥建. 多方向压电振动能量收集装置及其优化设计[J]. 振动与冲击, 2012, 31(16): 33-37.
HOU Zhi-wei, CHEN Ren-wen, LIU Xiang-jian. Optimization design of multi-direction piezoelectric vibration energy harvester[J]. Journal of Vibration and Shock, 2012, 31(16): 33-37.
[6] Mitcheson P D, Miao P, Stark B H, et al. MEMS electrostatic micropower generator for low frequency operation[J]. Sensors and Actuators A: Physical, 2004, 115(2): 523-529.
[7] 唐彬, 温中泉, 温志渝, 等. 基于振动式发电机的微型驻极体研究[J]. 传感技术学报, 2008, 21(2): 305-309.
TANG Bin, WEN Zhong-quan, WEN Zhi-yu, et al. Micro Electret Research for Vibration Micro Generator[J]. Chinese Journal of Sensors and Actuators, 2008, 21(2): 305-309.
[8] 王佩红, 戴旭涵, 赵小林. 微型电磁式振动能量采集器的研究进展[J]. 振动与冲击, 2007, 26(9): 94-98.
   Wang Pei-hong, Dai Xu-han, Zhao Xiao-lin. A Survey of Micro electromagnetic Vibration Energy Harvesters[J]. Journal of Vibration and Shock, 2007, 26(9): 94-98.
[9] Bai X, Wen Y, Li P, et al. Multi-modal vibration energy harvesting utilizing spiral cantilever with magnetic coupling[J]. Sensors and Actuators A: Physical, 2014, 209: 78-86.
[10] Aboulfotoh N A, Arafa M H, Megahed S M. A self-tuning resonator for vibration energy harvesting[J]. Sensors and Actuators A: Physical, 2013, 201: 328-334.
[11] Barton D A W, Burrow S G, Clare L R. Energy harvesting from vibrations with a nonlinear oscillator[J]. Journal of Vibration and Acoustics, 2010, 132(2): 021009.
[12] 王佩红, 赵小林, 戴旭涵. 基于 MEMS 技术的微型电磁式振动能量采集器的研究[D]. 上海: 上海交通大学, 2010.
    Wang Pei-hong, Dai Xu-han, Zhao Xiao-lin. Study on the Micro Electromagnetic Vibration Energy Harvester Based on MEMS Technology[D].Shanghai: Shanghai Jiaotong University,2010.
[13] Tang L, Yang Y, Soh C K. Toward broadband vibration-based energy harvesting[J]. Journal of Intelligent Material Systems and Structures, 2010, 21(18): 1867-1897.
[14] 岳喜海, 杨进, 文玉梅, 等. 多方向宽频磁电式振动能量采集器[J]. 仪器仪表学报, 2013, 34(9): 1961-1967.
    Yue Xihai, Yang Jin, Wen Yumei, et al. Multi-directional and broadband vibration energy harvester using magnetoeletric transducer[J]. Chinese Journal of Scientific Instrument, 2013, 34(9): 1961-1967.
[15] Yang B, Lee C, Xiang W, et al. Electromagnetic energy harvesting from vibrations of multiple frequencies[J]. Journal of Micromechanics and Microengineering, 2009, 19(3): 035001.
[16] 贺兴书. 机械振动学[M]. 上海交通大学出版社, 1991.
HE Xing-shu. Mechanical Vibration Theory[M]. Shanghai Jiaotong University Press,1991.
[17]  Rao N N. Elements of engineering electromagnetics[M]. Prentice Hall, 1977.
[18] 邵玮. 电磁式振动能量采集结构的优化[D]. 南京航空航天大学, 2012.
    Shao Wei. Optimal Structure Design for Electromagnetic Vibration Energy Harvester[D]. Nanjing University of Aeronautics and Astronautics,2012.
[19] S.Priya, D.J.Inman. 能量收集技术[M]. 南京:东南大学出版社,2011.
    S.Priya, D.J.Inman. Energy Harvesting Technology[M].Nanjing: Southeast University Press,2011.
PDF(2547 KB)

583

Accesses

0

Citation

Detail

Sections
Recommended

/