Gearbox noise reduction by combining modal acoustic contribution and panel acoustic contributions

WANG Jin-peng1, CHANG Shan1,2, LIU Geng1, WU Li-yan1, CHANG Le-hao1

Journal of Vibration and Shock ›› 2016, Vol. 35 ›› Issue (4) : 210-216.

PDF(2581 KB)
PDF(2581 KB)
Journal of Vibration and Shock ›› 2016, Vol. 35 ›› Issue (4) : 210-216.

Gearbox noise reduction by combining modal acoustic contribution and panel acoustic contributions

  • WANG Jin-peng1, CHANG Shan1,2, LIU Geng1, WU Li-yan1, CHANG Le-hao1
Author information +
History +

Abstract

The radiated noise of gearbox with a double helical gear system is calculated using FEM/BEM and the influence of mode shapes on radiated noise is analyzed. The modal participation factors and modal acoustic contributions of each mode are calculated and the mode having maximum contribution to the radiated noise on the input and output field points is found. The reasonable arrangements of ribs and isolate masses are proposed according to the analysis of modal acoustic contributions. The results show that the flexural vibration of gearbox housing has most obvious effect on the radiated noise. When the mode having maximum acoustic contributions is found, the positions on each panel having obvious flexural vibrations can be obtained and the radiated noise on the field points at the same side with the panel can be reduced by adding ribs or isolation massed on these positions.

Key words

gearbox / mode shape / modal participation factors / modal acoustic contributions / noise

Cite this article

Download Citations
WANG Jin-peng1, CHANG Shan1,2, LIU Geng1, WU Li-yan1, CHANG Le-hao1. Gearbox noise reduction by combining modal acoustic contribution and panel acoustic contributions[J]. Journal of Vibration and Shock, 2016, 35(4): 210-216

References

[1]. Mohamed Slim Abbes, Slim Bouaziz. An acoustic -structural interaction modeling for the evaluation of a gearbox-radiated noise [J]. Mechanical Sciences, 2008, 50: 569-577.
[2]. 余兴倬, 方  新, 周  禹等. 用FEM-BEM法预测箱型振动构件的声场辐射[J]. 华中理工大学学报, 1993, 21(1): 163-168.
Yu Xingzhuo, Fang Xin, Zhou yu. Prediction of the Acoustic Field of Box Type Vibrating Bodies by FEM-BEM [J]. J. Huazhong Univ. of Sci. & Teeh, 1993, 2(1):163-168.
[3]. Kato M, Inoue K, Shibata K, et al. Evaluation of Sound Power Radiated by a Gearbox [C]. Proc. Inter Gearing’94, 1994: 69-74.
[4]. 林腾蛟, 廖勇军, 李润方等. 双环减速器辐射噪声数值仿真及试验研究[J]. 振动与冲击, 2010, 29(3): 43-47.
Lin Tengjiao, Liao Yongjun, Li Runfang. Numerical simulation and experimental study on radiation noise of double-ring gear reducer [J]. Journal of Vibration and Shock, 2010, 29(3):43-47.
[5]. Jiri Tuma. Gearbox Noise and Vibration Prediction and Control [J]. International Journal of Acoustics and Vibration, 2009, 14(2): 1-11.
[6]. S.Le Moyne, J.-L.Tebecz. Ribs effects in acoustic radiation of a gearbox—their modeling in a boundary element method [J]. Applied Acoustics, 2002, 63: 223-233.
[7]. S.Le Moyne, J.-L.Tebecz, I.Tawfiq. Acoustical influence of stiffeners on acoustic radiation of plates [J]. Mechanical Systems and Signal Processing, 19(2005):195-212.
[8]. Katsumi Inoue, Masashi Yamanaka.Masahiko Kihara. Optimum Stiffener Layout for the Reduction of Vibration and Noise of Gearbox Housing [J]. Journal of Mechanical Design, 2002, 124: 518-523.
[9]. Micah R.Shepherd, Stephen A. Hambric. An Approach for Structural-Acoustic Optimization of Ribbed Panels Using Component Mode Synthesis [J]. Proceedings of Internoise 2012/ASME NCAD Meeting, 2012: 1-6
[10]. Arup Kumar Nandy, C.S.Jog. Optimization of Vibrating Structures to Reduce Radiated Noise [J]. Sturct Multidisc Optim, 2012, 45: 717-728.
[11]. Eiichirou TANNKA,Haruo HOUJOH, et al. Vibration and Sound-Radiation Analysis for designing a Low-Noise Gearbox with a Multi-Stage Helical Gear System [J]. JSME, 2003, 46(3): 1178-1185.
[12]. 刘  更, 赵冠军, 吴立言等. 基于声学贡献度分析的振动噪声控制方法研究[J]. 械科学与技术, 2009, 28(12): 1541-1545.
Liu Geng, Zhao Guanjun, Wu Liyan, et al. A Vibration and Noise Control Method Based on Acoustic Contribution Analysis [J], Mechanical Science and Technology Aerospace Engineering, 2009, 28(12):1541-1545.
[13]. 周建星, 刘  更, 马尚君. 内激励作用下齿轮箱动态响应与振动噪声分析[J]. 振动与冲击, 2011, 30(6): 234-238.
Zhou Jianxing, Liu Geng, Ma Shangjun. Vibration and Noise Analysis of Gear Transmission System [J]. Journal of Vibration and Shock, 2011, 36(6): 234-238.
[14]. Jianxing Zhou, Wenlei Sun, Qing Tao. Gearbox Low-Noise
Design Method Based on Panel Acoustic Contribution [J]. Mathematical Problems in Engineering, 2014, 2014(1): 1~10.
[15]. 李宏坤, 郭  骋, 房世利等. 齿轮箱减振降噪优化设计方法研究[J], 振动与冲击, 2013, 32(17): 150-154.
LI Hongkun, Guo Cheng, Fang Shili, et al. Optimization design method for gearbox’s vibration and noise reduction [J]. Journal of Vibration and Shock, 2013, 32(17): 150-154.
[16]. 王文平, 项昌乐, 刘  辉. 基于FEM/BEM变速器箱体辐射噪声的研究[J]. 噪声与振动控制, 2007, 5: 107-111.
Wang Wenping, Xiang Changle, Liu Hui. Study on Radiation Noise of Gearbox Housing Based on FEM/BEM [J].
[17]. 张金梅, 刘更, 周建星等. 人字齿轮减速器振动噪声影响因素仿真分析研究[J] 振动与冲击, 2014, 33(11): 161-166.
ZHANG Jinmei, LIU Geng, ZHOU Jianxing, et al. Simulation analysis of influencing factors on vibration and noise of a herringbone gear speed-reducer [J]. Journal of Vibration and Shock, 2014, 33(11): 161-166.
PDF(2581 KB)

Accesses

Citation

Detail

Sections
Recommended

/