Transverse vibration characteristics of a roll with symmetric clearance

PDF(1170 KB)

Journal of Vibration and Shock ›› 2018, Vol. 37 ›› Issue (10) : 110-116.

SHI Jianguo1，MENG Hui1,2，MAO Jun1

Author information +

History +

Abstract

Based on the Hertz contact theory, the model for the transverse impact vibration of a roll with symmetric clearance was established, and the time domain waveform, picture diagram, poincare map of the system were analysed under the conditions of different roll speed and rolling content, different clearance and guide installation stiffness by using the 4th and 5th order RungeKutta method. The nonlinear vibration characteristics of the roll and plate were investigated. The results show that: when the frequency ratio Ω=3, gap d=0.04 mm, nondimensional parameter T=13, and guide installation stiffness k 2=8×104 N/mm, the system state transforms from vibroimpact into viscous vibration. The rolling content and clearance have larger effects on the nonlinearity of system. The larger the rolling content and clearance, the more obvious of the system viscous movement； the roll speed and guide installation stiffness have weaker effects on the nonlinearity of system；The system is always in chaotic motion state in the adjustable ranges of parameters.

Key words

roll / transverse vibration / clearance / vibro-impact system / chaotic motion

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

SHI Jianguo1，MENG Hui1,2，MAO Jun1. Transverse vibration characteristics of a roll with symmetric clearance[J]. Journal of Vibration and Shock, 2018, 37(10): 110-116

References

[1]洪慎章.叶片辊锻工艺[J].热加工工艺,1980,(08):17-27.
Hong zhenzhang. Blade roll forging technology [J].HOT WORKING TECHNOLOGY, 1980,(08): 17-27.
[2] 姜忠立,赵燕,李云峰. 钛合金叶片冷轧工艺注意的几个问题[A],第四届中国航空学会青年科技论坛文集[C].北京:航空工业出版社,2010(11):678-682
Jiang Zhongli, Zhao Yan, Li Yunfeng. Problem that Should be Paid Attention to in Cold-Rolled Process of Titanium Blade[A],The fourth China aviation society youth science and Technology Forum [C]. Aviation Industry Press,2010(11):678-682.
[3] 姜绍西，黎明叶片无余量辊轧攻关成效显著[N]中国航空报,2009-11-27(003).
Jiang Shaoxi, No allowance rolling blade of Liming tackling achievement significantly [N]. China Aviation News,2009-11-27(003).
[4] ConeKM, ZadoksR I. A numerical study ofan impactoscillatorwith the addition ofdry friction[J]. Journal ofSound andVibra-tion, 1995, 188 (5): 659-683.
[5]Pilipchuk V N. Impact modes in discrete vibration sys-tem with rigid barriers. International Journal of Non-linear Mechanics, 2001; 36:999-1012
[6] 丁旺才,张有强,谢建华.含对称间隙的摩擦振子非线性动力学分析[J]. 摩擦学学报,2008,28(2):155-161
DING Wang-cai1, ZHANG You-qiang1, XIE Jian-hua. Analysis ofNonlinear Dynam ics ofDry Friction Oscillators with Symmetric Clearance[J]. TRIBOLOGY, 2008,28(2):155-161
[7] 赵文礼,周晓军.二自由度含间隙碰撞振动系统的分岔与混沌[J]. 浙江大学学报(工学版). 2006,40(8):1435-1439
ZHAO Wen-li1,ZHOU Xiao-jun. Bifurcation and chaos of impact vibration systemwith two degrees of freedom and clearance[J]. Journal of Zhejiang University(Engineering Science) .2006,40(8):1435-1439.
[8]余本高,谢建华,徐慧东.一类两自由度干摩擦系统倍化分岔与混沌的数值模拟[J]. 力学季刊,2009,30（9）：97-81
YU Ben-song,XIE jian-hua,XU hui-dong. The Numerical Simulation of Period Doubling Bifurcation and Chaos in a Two Degree of Freedom Dry Friction System. CHINESE QUARTERLY OF MECHANICS, 2009,30（9）：97-81
[9]刘中华　黄志龙　朱位秋, 二自由度碰撞振动系统的随机响应[J]. 振动工程学报.2002,15(3):257-282.
Liu Zhonghua,Huang Zhilong,Zhu Weiqiu. Stochastic Response of Two-Degree-of-Freedom Vibro-Impact System[J]. Journal of Vibration Engineering. 2002,15(3):257-282.
[10]卢绪祥,刘正强,黄树红. 含间隙碰撞振动系统的非线性振动特性[J], 动力工程学报, 2012,32(5):388-392
LU Xu-xiang,ＬIU Zheng-qiang,HUANG Shu-hong,LI lu-ping. Nolinear vibration characteristics of a vibro-impact system with clearance[J], Journal of Chinese society of power engineering, 2012, 32(5): 388-392
[11]谢建华,文桂林,肖建, 两自由度碰撞振动系统分叉参数的确定. 振动工程学报,2001,14(3):249-254.
Xie Jianhua,Wen Guilin, Xiao Jian. Criteria of Bifurcation Parameters of Vibro-Impact Systemwith Two-Degree-of-Freedom. Journal of Vibration Engineering, ,2001,14(3):249-254.
[12] Valentin L. Contact Mechanics and Friction. Physical Principles and Applications[M], Springer-Verlag, 2010,205-262
[13]侯福祥,张杰,曹建国,史小路. 带钢冷轧机振动问题的研究进展及评述[J]. 钢铁研究学报,2007,(10):6-10+39
HOU Fu-xiang, ZHANG Jie, CAO Jian-guo, SHI Xiao-lu. Review of Chatter Studies in Cold Rolling[J]. Journal of Iron and Steel Research, 2007,(10):6-10+39
[14]闫晓强. 热连轧机机电液耦合振动控制[J]. 机械工程学报,2011,(17):61-65
YAN Xiaoqiang. Machinery-electric-hydraulic Coupling Vibration Control of Hot Continuous Rolling Mills[J]. JOURNAL OF MECHANICAL ENGINEERING,2011,(17):61-65
[15]郜志英,臧勇,曾令强. 轧机颤振建模及理论研究进展[J]. 机械工程学报,2015,(16):87-105+112
GAO Zhiying, ZANG Yong,ZENG Lingqiang. Review of Modelling and Theoretical Studies on Chatter in the Rolling Mills[J]. JOURNAL OF MECHANICAL ENGINEERING,2015,(16):87-105+112
[16]毛君,张坤,孟辉,李深亮. 叶片辊轧机辊系在准周期激励作用下的振动特性分析[J]. 锻压技术,2015,(08):135-139
Mao Jun,Zhang Kun,Meng Hui,Li Shenliang. Analysis on vibration characteristic of blade rolling mill rollunder quasi-periodic excitation[J]. Forging ＆ Stamping Technology, 2015,(08):135-139
[17]尚雯,杜群贵.单面瓦楞机光辊机构动力学分析[J].振动与冲击, 2017,36(2): 77-82.
SHANG Wen,DU Qun-gui.Dynamic on the pressure roll mechanism of the single-sided corrugating machine[J].Journal of Vibration and Shock,2017,36(2): 77-82.