Effects and action mechanism of trace Sr+Sc and ultrasonic vibration on microstructure of A380 Alloy#br#

PDF(2552 KB)

Journal of Vibration and Shock ›› 2018, Vol. 37 ›› Issue (19) : 112-117.

LEI Jiping1,2,YU Jianwu1, LI Chengbo3, CHEN Jianmei2,LI Wei2, LUO Hong1

Author information +

History +

Abstract

Trace Sr+Sc and ultrasonic vibration (UV) were added in A380 alloy to implement modification processing and study effects and action mechanism of UV and trace Sr + Sc on microstructure and mechanical performance of A380 alloy.The results showed that the microstructure of A380 alloy can be refined significantly due to adding UV and trace Sr+Sc; the optimal refinement for the microstructure of A380 alloy is obtained when adding 0.15% Sr + 0.3% Sc and UV, its grain size is the smallest (about 27 μm) and its shape factor is the largest (about 0.8) with the highest hardness of 113BHN and the largest elongation of 4.7%; A380 alloy reaches the highest strength with its tensile strength of 302 MPa and its yield one of 272 MPa when adding 0.2% Sr + 0.4% Sc and UV.Through simulation analysis of ultrasonic cavitation field in melted A380 alloy, the influence mechanism of ultrasonic acoustic flow effect and cavitation one on alloy microstructure refinement and improvement of mechanical performance was explored.

Key words

Sc and Sr modification / Microstructures / Ultrasonic Vibration / Mechanical Properties

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

LEI Jiping1,2,YU Jianwu1, LI Chengbo3, CHEN Jianmei2,LI Wei2, LUO Hong1. Effects and action mechanism of trace Sr+Sc and ultrasonic vibration on microstructure of A380 Alloy#br#[J]. Journal of Vibration and Shock, 2018, 37(19): 112-117

References

[1] 陈建春.铝合金变质、细化、合金化材料及铝熔体物理净化材料的设计、工艺及应用研究[D].武汉大学,2011.
CHEN Jianchun.Preparations,Techniques and Applications of Al Alloys for Modification, Refining and Alloying,and Materials and Filtrators for Physical Parifying[D].Wuhan University,2011.
[2] 雷吉平，余剑武，李承波等. 稀土Sc和高强超声振动对A380合金的作用及机理[J]兵器材料科学与工程.2017,40(9):35-40.
LEI Jiping,YU Jianwu,LI Chengbo,et al.Effect of Sc and high-strength ultrasonic vibration on A380 alloy and its mechanism[J].Ordnance Material Science and Engineering. 2017,40(9):35-40.
[3] 苏蕙.亚稳态Al-10%Sr在A356合金中的行为及其机理研究[D].河北工业大学,2010.
SU Hui. Behavior and Mechanism of Metsatable Al-10%Sr Master Alloy in the A356[D]. Hebei University of Technology [D].2010
[4] 蔡郭生，吴龙，李新松等. Sr变质对ZL102组织和性能的影响[J].铸造技术, 2013,34(12): 1656-1658.
CAI Guosheng,WU Long,LI Xinsong,et al. Effect of Sr Modification on Structures and Properties of ZL102[J]. Foundry Technology.2013,34(12): 1656-1658
[5] SHEN Xiaocen,ZHAO Naiqin,LI Jiajun,et al. Effect of Ti/Sc atom ratio on heterogeneous nuclei, microstructure and mechanical properties of A357-0.033Sr alloys[J]. Materials Science and Engineering A, 2016, 671: 275–287.
[6] 郭晶.Bi和Sc对过共晶Al-18%Si合金微观组织与力学性能的影响[D].兰州理工大学,2011.
GUO Jing.Effect of Bi and Sc on Microstructure and Mechanical Properties of Hyper-eutectic Al-18%Si Alloy[D].Lanzhou University of Technology,2011.
[7] 张苏.La、RE、Sc变质工艺以对A356铝合金组织和性能的影响研究[D].昆明理工大学,2013,5.
ZHANG Su. The study and Effect of La, RE, Sc Modification on the Microstructure and Mechanical Properties of A356 alloy [D].Kunming University of Science and Technology,2013.
[8] 潘海成.微量钪锆复合对铝铁合金变质作用的电子理论研究[D].沈阳工业大学,2013.
PAN Haicheng.Research on Electronic Theory of Trace Scandium and Zirconium Compound Alloying for Al-Fe Alloy[D].Shenyang University of Technology, 2013.
[9] H.PUGA, J.BARBOSCA, S.COSTA, et al. PROKIC M.. Influence of indirect ultrasonic vibration on the microstructure and mechanical behavior of Al-Si-Cu alloy. Materials Science & Engineering　A 560 (2013) 589-595.
[10] 李瑞卿等. 超声铸造7085铝合金在热处理过程中的相变行为[J]. 材料工程.2016,43(6):24-30.
LI Ruiqing, LI Xiaoqian,CHEN Pinghu,et al. Phase Transformation Behavior of Ultrasonic-treated 7085 Aluminum Alloy During Heat Treatment[J]. Journal of Materials Engineering. 2016,43(6):24-30.
[11] W.KHALIFA,Y.TSUEKAWA,M.OKUMIYA. Effects of ultrasonic treatment on the Fe-intermetallic phases in ADC12 die cast alloy[J]. Journal of Materials Processing Technology 2010,210(15):2178-2187.
[12] ZHANG Daojieg, N.Laurentiu. Numerical modeling of the dispersion of ceramic nanoparticles during ultrasonic processing of aluminum-based nanocomposites[J]. J MATER RES TECHNOL. 2 0 1 4;3(4):296-302
[13] SONG Shangyu, ZHOU Xia, LI Li, et al. Numerical simulation and experimental validation of SiC nanoparticle distribution in magnesium melts during ultrasonic cavitation based processing of magnesium matrix nanocomposites[J]. Ultrasonics Sonochemistry 24 (2015) 43-54.
[14] 蒋日鹏.超声场对高强铝合金凝固过程的影响规律与作用机理研究[D].长沙：中南大学,2014.
JIANG Ripeng. Effect Rules and Function Mechanism of Ultrasonic Field on the Solidification of High Strength Aluminum Alloy[D]. Changsha: Central South University，2014.
[15] 鞠增业.7050合金大规格锭坯超声半连铸多场耦合建模与仿真及实验研究[D].中南大学,2013.
JU Zengye.Mathematical Modeling, Simulation and Experiment Study on Multi-field Coupling of 7050 Aluminum Alloy DC Continuous Casting of Large Scale Ingots with Ultrasonic Treatment[D]. Changsha: Central South University，2013.
[16] 曹凤国.超声加工[M].北京：化学工业出版社,2014,1.
CAO Fanggou. Ultrasonic Machining[M].Beijing: Chemical Iindustry Press, 2014.
[17] M.S.Plesset, R.B. Chapman, Collapse of an initially spherical vapour cavity in the neighbourhood of a solid boundary, J. Fluid Mech. 47 (2) (1971) 283-290.
[18] 冯若.超声手册[M].南京:南京大学出版社, 1999: 28.
FENG Ruo. Ultrasonics handbook [M].Nanjing: Nanjing University Press, 1999: 28.
[19] G.I.ESKIN. Principles of ultrasonic treatment application for light alloys Melts[J]. Advanced Performance Materials, 1997, 4(2): 223-232.
[20] 张敏,李晓谦,蒋日鹏,等.超声振动系统振幅分布与空化腐蚀区域研究[J].振动与冲击, 2014, 33(13): 59−62.
ZHANG Min, LI Xiaoqian, JIANG Ripeng, et al. Amplitude distribution and cavitation corrosion field of ultrasonic transducer system[J].Journal of Vibration and Shock, 2014,33(13): 59−62.
[21] L.F.MONDOLFO. Structure and properties of aluminum alloys[M]. London: Butterworths Press, 1976: 232−260.