Impact failure analysis of parachute lock roller beams

PDF(1038 KB)

Journal of Vibration and Shock ›› 2018, Vol. 37 ›› Issue (6) : 202-206.

LIU Jijun1，GUO Jun1，LIU Xiaochuan1,ZHOU Junming2

Author information +

History +

Abstract

The roller beam is one of the main loadbearing members of parachute locks. In the rocketsled tests of a parachute lock, the roller beam failure led to fail in opening the drag chute. According to the failure analysis, the mode of roller beam failure under impact is shear failure. In the paper, the roller beam impact shear failure mechanism was analyzed and it is shown that the parachute lock obtains an initial impact velocity under the action of the initial impulse of extraction parachute, and then collides with the roller beam, which causes the roller beam shear failure. The initial impact velocity and the equivalent mass of the motion mechanism were obtained by modelling the dynamics of the parachute lock, and the roller beam was modelled as a circular crosssection beam clamped at both ends under uniform impact load. The rigidplastic material model was used, and the thickness coefficient of the shear failure and the bendingshear interaction were taken into account. The threshold impact velocity of roller beam failure was derived based on the bendingshear theory. The effect of the mass ratio of the sleeve to the roller beam on the roller beam failure was discussed. Some improvements for structure design were proposed.

Key words

parachute lock / rigid plastic / threshold velocity / elementary failure criterion / shear failure

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

LIU Jijun1，GUO Jun1，LIU Xiaochuan1,ZHOU Junming2. Impact failure analysis of parachute lock roller beams[J]. Journal of Vibration and Shock, 2018, 37(6): 202-206

References

[1] 余莉，明晓，胡斌. 降落伞开伞过程的试验研究[J]. 南京航空航天大学学报，2006,38(2)：176-180
Yu Li, Ming Xiao, Hu Bin. Experimental investigation in parachute opening process[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2006,38(2)：176-180
[2] 王从磊，孙建红，喻东明. 阻力伞拉直过程的影响因素分析[J]. 南京航空航天大学学报，2013,45(2)：196-201
Wang Conglei, Sun Jianhong, Yu Dongming. Analysis of effect factors on deployment of drag parachute[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2013,45(2)：196-201
[3] 余莉，张鑫华，李水生. 降落伞伞衣载荷的性能试验[J]. 北京航空航天大学学报，2007,33(10)：1178 -1181
Yu Li, Zhang Xinhua, Li Shuisheng. Experimental on canopy payload performance parachute[J]. Journal of Beijing University of Aeronautics & Astronautics, 2007,33(10)：1178 -1181
[4] 完颜振海，冯顺山，董永香，周彤. 超音速伞弹流场特性数值分析[J]. 兵工学报，2011,32(5)：520 -525
WanYan Zhenhai, Feng Shunshan, Dong Yongxiang, Zhou Tong. Numerical Analysis of flow field characteristics of supersonic submunition with parachute[J]. Acta Armamentarii, 2011,32(5)：520 -525
[5] Kenji Takizawa, Tayfun E. Tezduyar, et al. Special methods for aerodynamic-moment calculations from parachute FSI modelling[J]. Computational Mechanics,2015,55(6):219-226.
[6] 沈文波，季享文，基于图像视觉作动控制的寿命试验台研制[J]. 计算机测量与控制，2015.23(17)，2434-2437
Shen Wenbo, Ji Xiangwen. Development of life test device based on image visual motion controlling[J]. Computer Measurement & Control, 2015.23(17)，2434-2437
[7] 苏新兵，王建平，周瑞祥，某型飞机新型阻力伞锁机构改进设计[J]. 液压与气动，2008(2) ：11-13
Su Xinbing, Wang Jianping, Zhou Ruixiang. Ameliorated design of new decelerated umbrella furnishment for a certain airplane[J]. Chinese Hydraulics & Penumatics, 2008(2) ：11-13
[8] 余同希，邱信明，冲击动力学[M]. 北京：清华大学出版社，2011.
Yu Tongxi, Qiu Xinming, Impact Dynamics[M]. Tsinghua university Press, Beijing, 2011.
[9] Yu TX, Chen FL. Failure modes and criteria of plastic structures under intense dynamic loading:A review[J]. Matals and Materials,1998(4): 219-226.
[10] Menkes SB, Opat HJ. Broken beams[J]. Exp Mech, 1973(13): 480-486.
[11] Jones N. Plastic failure of ductile beams loaded dynamically [J]. Trans ASME J Eng Ind，1976，98(B1):131-137.
[12] Yu TX, Chen FL, A further study of plastic shear failure of impulsively loaded champed beams[J]. Int. J. Impact Engng., 2000(24):613-629