Fault diagnosis of rolling bearings based on multipoint kurtosis spectrums and the maximum correlated kurtosis deconvolution method

LIU Wenpeng1,LIAO Yingying2,YANG Shaopu1,LIU Yongqiang1,GU Xiaohui1

Journal of Vibration and Shock ›› 2019, Vol. 38 ›› Issue (2) : 146-151.

PDF(1792 KB)
PDF(1792 KB)
Journal of Vibration and Shock ›› 2019, Vol. 38 ›› Issue (2) : 146-151.

Fault diagnosis of rolling bearings based on multipoint kurtosis spectrums and the maximum correlated kurtosis deconvolution method

  • LIU Wenpeng1,LIAO Yingying2,YANG Shaopu1,LIU Yongqiang1,GU Xiaohui1
Author information +
History +

Abstract

Considering the shortcoming of the maximum correlated kurtosis deconvolution(MCKD) method of being necessary to foreknow the precise fault feature period of rolling element bearings,a new fault diagnosis method was proposed for rolling element bearings based on the MCKD combined with the multipoint kurtosis spectrum(Mkurt spectrum).First,sampled signals were processed by the multipoint kurtosis spectrum method,through comparing the multipoint kurtosis of output signals from the deconvolution with different periods to modify the anticipated fault feature period.Next,the optimized fault feature period was put into the MCKD algorithm to strengthen the cyclical fault impact characteristics in the original signals.Then,the fault type was identified through the envelope demodulation.The analysis on the simulation signals,outer ring fault signals of a 6205 bearing and multi-fault railway wagon wheel set bearing signals show that the method proposed can realize the fault diagnosis of rolling element bearings effectively,even on the condition without the knowledge of accurate speed,which is of a high value of engineering application.

Key words

 rolling elemrnt bearing / fault diagnosis / Mkurt spectrum / MCKD / multi-fault

Cite this article

Download Citations
LIU Wenpeng1,LIAO Yingying2,YANG Shaopu1,LIU Yongqiang1,GU Xiaohui1. Fault diagnosis of rolling bearings based on multipoint kurtosis spectrums and the maximum correlated kurtosis deconvolution method[J]. Journal of Vibration and Shock, 2019, 38(2): 146-151

References

[1] Gu X, Yang S, Liu Y, et al. Rolling element bearing faults diagnosis based on kurtogram and frequency domain correlated kurtosis[J]. Measurement Science and Technology, 2016, 27(12): 125019.
[2] Wiggins R A. Minimum Entropy Deconvolution[J]. Geoexploration, 1978, 9(16): 21-35.
[3] 姚炽伟,樊新海,黄梦. 基于MED的滚动轴承故障特征提取方法及应用[J]. 装甲兵工程学院学报,2013,27(3): 35-38.
YAO Zhi-wei, FAN Xin-hai, HUANG Meng. The rolling bearing fault feature extraction method based on MED and its application[J]. Journal of armored force engineering institute, 2013,27(3): 35-38.
[4] H. Endo, R.B. Randall. Application of a minimum entropy deconvolution filter to enhance autoregressive model based gear tooth fault detection technique[J]. Mechanical Systems and Signal Processing, 2007, 21(2): 906–919.
[5] 张龙,胡俊锋,熊国良. 基于MED和SK的滚动轴承循环冲击特征增强[J].振动、测试与诊断,2017, 37(1): 97-101.
ZHANG Long, HU Jun-feng, XIONG Guo-liang.Cyclic shock enhancement by the combination of minimum entropy deconvolution and spectral kurtosis[J]. Journal of Vibration, Measurement and Diagnosis, 2017, 37(1): 97-101.
[6] 王宏超,陈进,董广明.基于最小熵解卷积与稀疏分解的滚动轴承微弱故障特征提取[J].机械工程学报,2013, 49(1): 88-94.
WANG Hong-chao, CHEN Jin, DONG Guang-ming. Fault diagnosis method for rolling bearing’s weak fault based on minimum entropy deconvolution and sparse decomposition[J]. Journal of Mechanical Engineering, 2013, 49(1): 88-94.
[7] McDonald G L, ZHAO Qing, ZUO Ming J. Maximum correlated kurtosis deconvolution and application on gear tooth chip fault detection[J]. Mechanical Systems and Signal Processing, 2012, 33: 237-255.
[8] 武兵,贾锋,熊晓燕.基于最大相关峭度反褶积的轴承故障诊断方法[J]. 振动、测试与诊断,2014, 34(3): 570-575.
WU Bing, JIA Feng, XIONG Xiao-yang. Bearing Fault Diagnosis based on maximum correlated kurtosis deconvolutin[J]. Journal of Vibration, Measurement and Diagnosis, 2014, 34(3): 570-575.
[9] 钟先友,赵春华,陈宝家,等. 基于MCKD和重分配小波尺度谱的旋转机械复合故障诊断研究[J]. 振动与冲击,2015, 34(7): 156-161.
ZHONG Xian-you, ZHAO Chun-hua, CHEN Bao-jia, et al. Rotating machinery fault diagnosis based on maximum correlation kurtosis deconvolution and reassigned wavelet scalogram[J].Journal of Vibration and Shock, 2015, 34(7): 156-161.
[10] ZHOU Hai-tao, CHEN Jin, DONG Guang-ming. Application of maximum correlated kurtosis deconvolution on rolling element bearing fault diagnosis[J].Engineering Asset Management-Systems, Professional Practices and Certification, 2015, 159-172.
[11] MIAO Yong-hao, ZHAO Ming, LIN Jing, et al. Application of an improved maximum correlated kurtosis deconvolution method for fault diagnosis of rolling element bearings[J].Mechanical Systems and Signal Processing, 2017, 92: 173-195.
[12] McDonald G L, ZHAO Qing. Multipoint Optimal Minimum Entropy Deconvolution and Convolution Fix: Application to vibration fault detection[J].Mechanical Systems and Signal Processing, 2017, 82: 461-477.
[13] 张晓涛,唐力伟,王平,等. 最小周期相关熵解卷积结合窄带解调的轴承复合故障诊断研究[J]. 振动工程学报,2015, 28(4): 666-672.
ZHANG Xiao-tao, TANG Li-wei, WANG Ping, et al. The research of bearing multi-fault diagnosis based on minimum period correlated entropy deconvolution and narrowband demodulation[J]. Journal of vibration Engineering, 2015, 28(4): 666-672.
PDF(1792 KB)

Accesses

Citation

Detail

Sections
Recommended

/