Dynamic characteristics and parametric sensitivity of engine air spring hydraulic mount

PDF(2472 KB)

Journal of Vibration and Shock ›› 2019, Vol. 38 ›› Issue (21) : 178-185.

HOU Suojun1,2YANG Wei3

Author information +

History +

Abstract

Aiming at dynamic characteristics and parametric sensitivity of automobile engine air spring hydraulic mount, the equivalent volume stiffness of the mount’s upper liquid chamber was used to replace effects of decoupling membrane and closed air chamber on the mount’s dynamic characteristics.Based on the corresponding theory of fluid mechanics, the mount’s mechanical model was established.The correctness of the model was verified with tests.Dynamic characteristics of air spring were analyzed when air chamber was opened and closed.The model was used to study effects of air spring hydraulic mount’s parameters, such as, rubber main spring’s volume stiffness, damping coefficient and equivalent piston area, equivalent volume stiffness of upper liquid chamber when air chamber is opened and closed, liquid inertia coefficient and damping one of inertial channel on the mount’s dynamic stiffness and damping angle to obtain these parameters’ sensitivities to the mount’s dynamic stiffness.It was shown that the study results are helpful for optimizing design of the mount’s dynamic characteristics, shortening its R&D period and saving its R&D costs.

Key words

automobile engine / air spring hydraulic mount / dynamic characteristics / parameter sensitivity

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

HOU Suojun1,2YANG Wei3. Dynamic characteristics and parametric sensitivity of engine air spring hydraulic mount[J]. Journal of Vibration and Shock, 2019, 38(21): 178-185

References

[1] 庞剑，谌刚，何华. 汽车噪声与振动:理论与应用[M]. 北京：北京理工大学出版社，2006
PANG Jian, CHEN Gang, HE Hua. Automobile noise and vibration: Theory and Application[M]. Beijing：Beijing Institute of Technology Press，2006.
[2] Lee Y W，Lee C W. Dynamic analysis and control of an active engine mount system[J]. Proceedings of the institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2002, 216: 921-931.
[3] Shibayama T, Ito K, Gami T, et al. Active engine mount for a large amplitude of idling vibration[C]. SAE Paper 951298.
[4] 孙林峰，樊文欣. 发动机悬置技术的发展研究[J]. 内燃机, 2010, 6(3): 19-22.
SUN Linfeng, FAN Wenxin. Research of development of the engine mount[J]. Internal Combustion Engines, 2010, 6(3): 19-22.
[5] 陈志勇. 轻型车驾驶室液压悬置性能匹配研究[D]. 吉林：吉林大学, 2011.
CHEN Zhiyong. Performance-match of hydraulic mount for light vehicle cab[D]. Jilin: Jilin University, 2011.
[6] 史文库，林逸，吕振华，等. Audi100 轿车动力总成液压悬置隔振技术研究[J].吉林工业大学学报, 1996, 26(1):10-15
SHI Wenku, LIN Yi, LV Zhenhua, et al. A Study on hydraulic engine mounting isolation characteristics for Audi100 car[J]. Journal of Jinlin University of Technology，1996, 26(1):10-15
[7] 秦民，林逸，马铁利，等. 汽车液压悬置系统动态特性研究[J]. 汽车工程, 2001,23(6): 381-384.
    QIN Min, LIN Yi, MA Tieli, et al. A Study on dynamic characteristic of hydraulic mount system[J]. Automotive Engineering, 2001,23(6): 381-384.
[8] 史文库, 侯锁军, 王雪婧, 等. 磁流变发动机悬置隔振性能与模糊PID控制[J]. 农业工程学报, 2012, 28(20):50-57.
SHI Wenku, HOU Suojun, WANG Xuejing, et al. Vibration isolation performance and fuzzy PID control method of magneto-rheological fluid engine mount[J]. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(20):50-57.
[9] 王雪婧. 磁流变半主动发动机悬置隔振性能与控制方法研究[D]. 吉林：吉林大学，2011.
WANG Xuejing.The vibration isolation performance and control method research of MRF semi-active engine mount[D]. Jilin: Jilin University，2011.
[10] MOJTABA Azadi, SAEED Behzadipour, GARRY Faulkner. Performance analysis of a semi-active mount by a new variable stiffness spring[J]. Journal of Sound and Vibration, 2011,330:2733-2746.
[11] 贺良勇. 空气弹簧式半主动液阻悬置开发及动特性研究[D]. 广东：华南理工大学，2010.
    HE Liangyong. Design method and dynamic characteristic study of an air spring type semi-active hydraulic mount[D]. Guangdong: South China University of Technology, 2010.
[12] 范让林,张祥龙. 可变解耦膜刚度半主动液阻悬置研究[J]. 机械工程学报, 2015,51(14): 108-114.
    FAN Ranglin, ZHANG Xianglong. Study on semi-active hydraulic mount with variable-stiffness decoupling membrane[J]. Journal of Mechanical Engineering, 2015,51(14): 108-114.
[13] 杨慰,史文库，马利红，等. 汽车动力总成液压悬置参数试验研究[J]. 汽车工程, 2014, 36(7): 894-898.
    YANG Wei, SHI Wenku, MA Lihong, et al. An Experimental Study on the Hydraulic Mount Parameters of Automotive Powertrain[J]. Automotive Engineering, 2014, 36(7): 894-898.
[14] 张士星. 发动机液阻悬置动特性分析与研究[D]. 重庆: 重庆大学, 2009.　
ZHANG Shixing. The optimizing technology study of engine hydraulic mount system[D]. Chongqing: Chongqing University, 2009.　
[15] 吕振华，上官文斌，梁伟，等. 液阻悬置动态特性实验方法及实测分析[J]. 中国机械工程, 2004, 15(2): 182-186.
LV Zhenhua, SHANGGUAN Wenbin, LIANG Wei, et al. Experimental methods and test evaluation for the dynamic characteristics of hydraulically damped rubber mount[J]. China Mechanical Engineering, 2004, 15(2): 182-186.
[16]林建忠, 阮晓东, 陈邦国, 等. 流体力学[M]. 北京:清华大学出版社，2005.
LIN Jianzhong, RUAN Xiaodong, CHEN Bangguo, et al. Fluid mechanics[M]. Beijing: Tsinghua University Press，2005.
[17] 范让林, 汪建忠, 吕振华. 汽车发动机悬置系统隔振性能优化[J]. 内燃机学报, 2010, 28(3): 269-274.
    FAN Ranglin, WANG Jianzhong, LV Zhenhua. Vibration isolation optimization for automotive engine mounting system[J]. Transactions of CSICE, 2010, 28(3): 269-274.