An orthogonal experiment study on dynamic characteristics of a swing polishing grinding head

PDF(1807 KB)

Journal of Vibration and Shock ›› 2019, Vol. 38 ›› Issue (24) : 101-106.

YE Youdong，WANG Kai，ZHOU Zhebo

Author information +

History +

Abstract

An experimental platform of dynamic characteristics of a swinging polishing grinding head was designed and built.The vibration signals of the grinding head were measured by an acceleration sensor.Based on the factors affecting the vibration of the grinding head, orthogonal experiments were carried out based on three parameters of grinding spindle speed, grinding head pressure, and grinding block size.By analyzing and comparing the experimental data and the waterfall chart, optimum matching polishing parameters were obtained for suppressing the vibration.The experimental results provide a useful reference for the application of the swing polishing grinding head on polishing machines.

Key words

polishing grinding head / dynamic characteristics / orthogonal experiment / polishing parameters

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

YE Youdong，WANG Kai，ZHOU Zhebo. An orthogonal experiment study on dynamic characteristics of a swing polishing grinding head[J]. Journal of Vibration and Shock, 2019, 38(24): 101-106

References

[1] Ozturk A, Timucin M. Silicon carbide particle embedded magnesium oxychloride cement composite bricks for polishing of porcelain stoneware tiles[J]. Advances in Applied Ceramics, 2011, 110(7):400-408.
[2] Niederhãusern S, Bondi M, Bondioli F. Self‐Cleaning and Antibacteric Ceramic Tile Surface[J]. International Journal of Applied Ceramic Technology, 2013, 10(6):949-956.
[3] Nascimento A S B D S, Sousa F J P. Distribution of contact pressure over the surface of ceramic floor tiles during the polishing process[J]. Journal of the European Ceramic Society, 2014, 34(13):3209-3215.
[4] Siligardi C, Tagliaferri L, Lusvarghi L, et al. Preparation of innovative metallic composite glazes for porcelainized stoneware tiles[J]. Ceramics International, 2014, 40(1):1821-1828.
[5] Penteado C S G, Carvalho E V D, Lintz R C C. Reusing ceramic tile polishing waste in paving block manufacturing[J]. Journal of Cleaner Production, 2016, 112:514-520.
[6] Abdrakhimova E S. Effect on Wollastonite on the Structure of Porous Ceramic Tiles Based on Wastes From Nonferrous Metallurgy and Power Generation[J]. Glass & Ceramics, 2017:1-3.
[7] 许雄超，王世旺.基于陶瓷抛光机抛磨运动建模及试验研究[J].机械设计与制造，2008（9）:132-134.
XU Xiong-chao,WANG Shi-Wang. The modeling and experimental study upon a ceramic tile polisher[J].Machinery Design and Manufacture,2008(9)：132-134.
[8] 邵俊鹏，徐斌.新型往复式抛光机磨头创新设计及动力学分析[J].振动与冲击，2011，30（7）：31-34，70.
SHAO Jun-peng, XU Bin. Design and dynamic analysis for a new type reciprocating grinding head of a polishing machine[J].Journal of Vibration and Shock,2011,30(7):31-34,70.
[9] 迟明善，邵俊鹏，王仲文.抛光磨头摆动机构建模与运动仿真[J].哈尔滨理工大学学报，2012，17（5）：29-33.
CHI Ming-shan,SHAO Jun-peng,WANG Zhong-wen. Modeling and Motion Simulation of Polishing Head Swinging Mechanism[J]. Journal of Harbin University of Science and Technology, 2012,17(5):29-33.
[10] 邵俊鹏，徐斌.多转速抛光机创新设计及振动实验研究[J].振动与冲击，2012，31（4）：110-114.
SHAO Jun-peng, XU Bin. Creative design and vibration experimental study of multi-speed polishing machine[J].Journal of Vibration and Shock, 2012,31(4):110-114.
[11]吴南星，朱金贵，肖任贤，等. 陶瓷用抛光机磨头声-结构分析及噪声控制[J].陶瓷学报，2009（1）：101-105.
WU Nan-xing,ZHU Jin-gui,XIAO Ren-xian,etc. Sound-structure analysis and noise control of ceramic polisher’s grinding head[J]. Journal of Ceramics,2009(1)：101-105.
[12] 邵俊鹏，徐斌.抛光机磨头结构改进及其对振动的影响实验研究[J].振动与冲击，2011，30（8）：207-211.
SHAO Jun-peng, XU Bin. Structure improvement of grinding head of polishing machine and experimental study on its effect on vibration[J].Journal of Vibration and Shock, 2011,30(8):207-211.
[13] 徐斌，邵俊鹏，刘嘉.抛光机磨头磨块座振动问题求解及实验[J].中国机械工程，2011（2）：179-184.
XU Bin, SHAO Jun-peng, LIU Jia. Solving for vibration problem of grinding block holder of polishing machine grinding head and experiments[J].China Mechanical Engineering, 2011(2):179-184.
[14]汪凯，叶友东，周哲波．基于ADAMS的摆动抛光磨头动态特性仿真研究．机械传动，2017（8）：23-27
WANG Kai,YE You-dong,ZHOU Zhe-bo. Research of the dynamic characteristic of swing polishing head based on ADAMS simulation[J].Journal of Mechanical Transmission,2017(8):23-27.
[15] 陈丽芬，吴运新.利用功率谱分析抛光机磨头的故障[J] .佛山陶瓷，2006，16（1）：21-23.
CHEN Li-fen, WU Yun-xin. Failure analysis of grinding head of polishing machine by power spectrum[J]. Foshan Ceramics, 2006,16(1):21-23.
[16] 周祖兵，隋旭东，邓小明.机械振动理论在抛光磨头故障分析中的应用[J].佛山陶瓷，2010，20（12）：37-39.
ZHOU Zu-bing,SUI Xu-dong,Deng Xiao-Ming. Application of mechanical vibration theory in malfunction analysis of polishing grinding head[J].Foshan Ceramics, 2010,20(12):37-39.
[17] 邵俊鹏，徐斌.新型不等距抛光机磨头创新设计及动力学分析[J].中国陶瓷，2011（5）：50-54.
SHAO Jun-peng, XU Bin. Creative design and dynamics analysis of the new grinding head of polishing machine with unequal spacing of grinding block.China ceramics, 2011(5):50-54.