Composite environmental test technique of multi-axial vibration and shock

PDF(1393 KB)

Journal of Vibration and Shock ›› 2019, Vol. 38 ›› Issue (3) : 237-243.

ZOU Xueli, LI Hongmin, WANG Haiyan

Author information +

History +

Abstract

To study multi-mechanics composite environmental test technique for multi-axis vibration and shock, through deeply studying test system’s construction, test control scheme and decoupling vibration and shock signals, the signal separation technique was put forward, and the signal separator was designed.The signal separator was taken as an important link of a closed-loop control system to realize decoupling of vibration and shock signals.The separation accuracy of the signal separator reached the expected effect to realize the real-time decoupling and real-time control of vibration and shock signals, and improve the control accuracy of multi-axis shock tests.Through test verification, it was shown that the proposed method is feasible and valuable for practical application.

Key words

Multi-axis Vibration, Multi-axis shock / Multi-mechanics test technique / combined experiment test technique.

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

ZOU Xueli, LI Hongmin, WANG Haiyan. Composite environmental test technique of multi-axial vibration and shock[J]. Journal of Vibration and Shock, 2019, 38(3): 237-243

References

[1] 李舜酩,雷衍斌.基于负熵的转子混叠振动信号盲识别[J].中国机械工程,2009,20(4):437-441.
Li Shunming, Lei Yanbin. Blind Identification of Rotors’Mixed Vibration Signals Based on Negative Entropy Arithmetic. China Mechanical Engineering, 2009,20(4):437-441.
[2] 冶继民,张贤达,朱孝龙.信源数目未知和动态变化时的盲信号分离[J].中国科学(E辑),2005, 35(12):1277-1287.
[3] 雷衍斌.航空发动机振动信号分离技术研究[D].工学硕士学位论文，2010.
Lei Yanbin. Research on Separation Technology of Aero-Engine Vibration Signals[D]. A Dissertation for the Degree of M.Eng,2010.
[4] 李宁,史铁林.基于功率谱密度的盲信号源数估计[J].数据采集与处理,2008,23(1):1-7.
Li Ning, Shi Tielin. Estimation of Blind Source Number Based on Power Spectral Density[J]. Journal of Data Acquisition &Processing, 2008, 23(1): 1-7.
[5] 易长平，赵明生，崔正荣.基于独立分量分析的爆破振动信号分离仿真试验[J].爆破，2010，27(1): 31-36.
YI Chang-ping, ZHAO Ming-sheng, CUI Zheng-rong. Simulation Experiment of Separation of Blasting Vibration Signal based on ICA Method[J]. BLASTING,2010,27(1):31-36.
[6] 胥永刚，李强，王正英，王太勇.基于独立分量分析的机械故障信息提取[J].天津大学学报，2006, 39(9)：1066-1071.
XU Yong-gang,LI Qiang,WANG Zheng-ying,WANG Tai-yong. Fault Information Extraction of Mechanical Equipment Based on Independent Component Analysis[J].Journal of Tianjin University,2006,39(9)：1066-1071.
[7] 胡博. 基于偏相干分析法的工频干扰消除方法研究[D].工学硕士学位论文，2006.
HuBo.The Removal Power Interefrence Based on Partial Coherence Analysis[D].A Dissertation for the Degree of M.Eng, 2006.
[8] 赵海澜，王鸿振.偏相干分析识别噪声源的计算[J].噪声与振动控制，2005,5:31-33.
ZHAO Hai-lan,WANG Hong-zhen. Calculation of Identifying Noise Source Based on Partial Coherence Analysis[J]. Noise and Vibration Control,2005,5:31—33.
[9] 章林柯，江涌，何琳.乔列斯基分解应用于偏相干问题的可行性研究[J].船舶力学，2011,15(5)：556-562.
ZHANG Lin-ke,JIANG Yong,HE Lin. Study on the Feasibility of Applying Cholesky Decomposition to Partial Coherence[J]. Journal of Ship Mechanics, 2011,15(5)：556-562.
[10] 宋晶.利用偏相干函数法识别汽车整车噪声源的研究[D].工学硕士学位论文，2006.
SONG Jing. Study of Identifying Vehicle Noise Source with Partial Coherence Function[D].A Dissertation for the Degree of M.Eng,2006.
[11] 吴旭东，左曙光，芦勇. 偏相干分析在燃料电池轿车噪声源识别中的应用[J].噪声与振动控制，2008,3：81-84.
WU Xu-dong, ZUO Shu-guang, LU Yong. Identifying Noise Source Based on Application to Partial Coherence Analysis in Fuel Cell Car[J]. Noise and Vibration Control, 2008,3：81-84.
[12] 吴旭东，左曙光，杨宪武.基于偏相干分析的轮胎六分力信号识别[J].振动、测试与诊断，2011,31(6)：685-689.
WU Xu-dong, ZUO Shu-guang, YANG Xian-wu. Signal Identification in Six-Component Test on Tire Based on Partial Coherence Analysis[J]. Journal of Vibration,Measurement & Diagnosis,2011,31(6)：685- 689.
[13] 陈茉莉，李舜酩. 信号源识别的相干函数法[J].中国机械工程，2007,18(1):95-100.
Chen Moli, Li Shunming. Coherence Functions Method for Signal Source Identification[J]. China Mechanical Engineering，2007,18(1):95-100.
[14] 练宏俊，卢耀祖，陈卫，刘钊.基于偏相干分析法的装载机司机室噪声源识别[J].同　济大学学报，2001,29(11):1313-1316.
LIAN Hong-jun, LU Yao-zu, CHEN Wei, LIU Zhao. Identification of Loader Cab’s Noise Sources Based on Partial Coherence Analysis Method[J]. Journal of Tongji University, 2001,29(11):1313-1316.
[15] 刘阳，李传日.多输入多输出系统的相干性的问题分析[J].装备环境工程，2009,6(1):35-42.
LIU Yang,LI Chuan-ri. Analysis of the Coherence of Multiple Input/Multiple Output System[J].Equipment Environmental Engineering, 2009,6(1):35-42.