Missile warheads with a high speed often explode ahead of time due to damage when attacking and penetrating underground targets to greatly weaken their damage to targets and even affect the whole strategic situation. Here, aiming at this problem to be solved urgently, damage characteristics of RDX-based PBX explosive in missile warheads were studied under high G-value loading. Based on the first-stage light gas cannon, a series of tests were conducted to study damage characteristics of PBX explosive specimens under tri-axial impact loading. Combining with numerical simulation, Griffith crystal particles’ micro-crack fracture strength and the scanning electronic microscope (SEM), the damage mode of PBX explosive specimens was studied and characterized. The quantitative relationship between specimens’ density after tests and impact loading was also explored. The results showed that the shear strength between crystal particle surface and binder is about 0.3 Mpa, so shear de-bonding phenomena occur under smaller impact loads; with increase in three-axial impact load pressure, crystal particle twin zone, particle fragmentation and melted meso-damage mode gradually appear; the modified Boltzmann relationship between specimens’ density after tests and impact load pressure is basically consistent to test results; the prediction results of Griffith crystal particles’ micro-crack fracture strength agree well with the measurement and analysis results of SEM, they provide an important basis for studying the meso-damage mechanism of PBX explosive.
Key words
impact /
PBX explosive /
meso-damage /
numerical simulation
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
[1] Gargano A, Pingkarawat K, Blacklock M, et al. Comparative assessment of the explosive blast performance of carbon and glass fibre-polymer composites used in naval ship structures [J]. Composite Structures, 2017,171(7): 306-316.
[2] Boronski Dariusz, Kotyk Maciej, Mackowiak Pawel, et al. Mechanical properties of explosively welded AA2519-AA1050-Ti6Al4V layered material at ambient and cryogenic conditions [J]. Materials & Design, 2017,133(5): 390-403.
[3] Hussein Ahmed K, Elbeih Ahmed, Zeman Svatopluk. Thermal decomposition kinetics and explosive properties of a mixture basedoncis-1,3,4,6-tetranitrooctahydroimidazo-[4,5-d]imidazole and 3-nitro-1,2, 4-triazol-5-one (BCHMX/NTO) [J]. Thermochimica Acta, 2017,655(9): 292-301.
[4] Abid Muhammad, Hou Xiaomeng, Zheng Wenzhong, et al. High temperature and residual properties of reactive powder concrete - A review [J]. Construction and Building Materials, 2017,147(8): 339-351.
[5] Baker Wade A, Untaroiu Costin D, Crawford Dawn M, et al. Mechanical characterization and finite element implementation of the soft materials used in a novel anthropometric test device for simulating underbody blast loading [J]. Journal of The Mechanical Behavior of Biomedical Materials, 2017,74(10): 358-364.
[6] WU Yanqing, HUANG Fenglei. A micromechanical model for predicting combined damage of particles and interface debonding in PBX explosives [J]. Mechanics of materials, 2009,41(1): 27-47.
[7] LI Junling, FU Hua, TAN Duowang, et al. Fracture Behaviour Investigation into a Polymer-Bonded Explosive [J]. Strain,2012,48(6): 463-473.
[8] 李俊玲，傅华，谭多望等. PBX炸药的拉伸断裂损伤分析[J]. 爆炸与冲击, 2011,31(6): 624-628.
LI Jun-ling, FU Hua, TAN Duo-wang et al. Fracture damage analysis of PBX [J].Explosion and Shock Waves, 2011,31(6): 624-628.
[9] 陈鹏万. 高聚物粘结炸药的力学行为及变形破坏机理[J]. 含能材料,2000,8(4): 161-164.
CHEN Peng-wan. Mechanical behaviour and deformation and failure mechanisms of polymer bonded explosives [J]. Chinese Journal of Energetic Material, 2000,8(4): 161-164.
[10] P. J. Gould, D. Porter, I. G. Cullis, Edps. Predicting the Damage/Failure Transition in Polymer-Bonded Explosives [C]. DYMAT 2009 - 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading. Brussels：DYMAT, 2009：1629-1633.
[11] K. Ellis, C. Lepparid, H. Radesk. Mechanical Properties and Damage Evaluation of a Uk pbx [J]. Journal of Materials Science,2005，40(23)：6241-6248.
[12] D. W. Nicholson. On the Detachment of a Rigid Inclusion from an Elastic Matrix [J]. Journal of Adhesion,1979,10(3): 255-260.
[13] 陈鹏万. 含能材料损伤理论及应用[M]. 北京: 北京理工大学出版社, 2006：100-150.
CHEN Peng-wan. Damage theory and application of energetic materials [M]. Beijing: Beijing Polytechnic University Press, 2006：100-150.
{{custom_fnGroup.title_en}}
Footnotes
{{custom_fn.content}}
PDF(2313 KB)
