Tests for transmission error and tooth root stress of spiral bevel gears under quasi-static condition

PDF(1548 KB)

Journal of Vibration and Shock ›› 2020, Vol. 39 ›› Issue (15) : 150-155.

WANG Cheng1, WAN Bowen2, CHEN Yanyan3, MAO Feihong1, GUO Jing1, CHEN Juan1

Author information +

History +

Abstract

开展弧齿锥齿轮的试验研究可为理论设计、制造和装配等提供基础数据，提高弧齿锥齿轮的啮合质量和使用性能。以弧齿锥齿轮为研究对象，采用功率封闭试验系统，在准静态条件下开展试验研究。对不同转速和扭矩工况的传递误差和齿根应力开展测试，并从时域和频域角度进行了对比分析。结果表明：弧齿锥齿轮的传递误差呈正弦或余弦形式波动，并以转频对应幅值为主；随着扭矩的增加，弧齿锥齿轮传递误差峰峰值呈现递增的趋势，且传递误差转频对应幅值近似呈线性比例增加；转速对传递误差峰峰值影响较小，但对传递误差转频对应幅值影响较大。随着扭矩的增加，齿根应力峰峰值呈线性比例递增；转速对齿根应力峰峰值的影响较小；从小端到大端，齿根应力的变化很大且呈现增大的趋势；齿轮啮合过程中，轮齿进入啮合时，齿根应力为拉伸方向且应力逐渐增加达到峰值，随后轮齿逐渐退出啮合，齿根应力逐渐减小直至压缩方向并达到最小值；从频域角度齿根应力以转频及其倍频为主。

Key words

弧齿锥齿轮 / 试验研究 / 传递误差 / 齿根应力

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

WANG Cheng1, WAN Bowen2, CHEN Yanyan3, MAO Feihong1, GUO Jing1, CHEN Juan1. Tests for transmission error and tooth root stress of spiral bevel gears under quasi-static condition[J]. Journal of Vibration and Shock, 2020, 39(15): 150-155

References

[1] 李特文. 齿轮啮合原理[M]. 上海:上海科学技术出版社,1984.
Litvin. Gear mesh theory[M]. Shanghai：Shanghai Science and Technology Press，1984.
[2] 王延忠. 航空弧齿锥齿轮摩擦学设计和制造[M]. 北京：科学出版社，2014.
WANG Yanzhong. Tribology design and manufacturing of aviation spiral bevel gears[M]. Beijing：Science Press，2014.
[3] Litvin F L, Fuentes A, Hayasaka K. Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gears[J]. Mechanism and Machine Theory, 2006, 41: 83-118.
[4] 曹雪梅,方宗德,许浩,朱自冰.弧齿锥齿轮的齿面主动设计及试验验证[J].机械工程学报,2008(07):209-214.
CAO Xuemei, FANG Zongde, XU Hao, etc. Function-oriented Active Tooth Surface Design of Spiral Bevel Gears and Experimental Tests [J]. Journal of mechanical engineering,2008(07):209-214.
[5] 苏进展,方宗德.弧齿锥齿轮印痕稳定性优化设计与试验[J].航空动力学报,2012,27(11):2622-2628.
SU Jinzhan, FANG Zongde. Optimization design and test of stability of contact patterns of spiral bevel gears [J]. Journal of Aerospace Power,2012,27(11):2622-2628.
[6] 曹雪梅,杨博会,邓效忠.轮齿接触分析的分解算法与试验验证[J].机械工程学报,2018,54(05):47-52.
CAO Xuemei, YANG Bohui, DENG Xiaozhong. Novel Decomposition Methodology for Tooth Contact Analysis and Experiment Tests [J]. Journal of mechanical engineering,2018, 54(05):47-52.
[7] 张卫青,郭晓东,张明德.螺旋锥齿轮端面滚齿切齿计算及接触特性控制[J].机械工程学报,2018,54(19):49-57.
ZHANG Weiqing, GUO Xiaodong, ZHANG Mingde. Machine Setting Calculation and Contact Characteristics Control Method of Face Hobbing Hypoid Gear [J]. Journal of mechanical engineering,2018,54(19):49-57.
[8] 聂少武,邓静,邓效忠,张华,曹雪梅,李聚波.弧齿锥齿轮齿面拓扑修形及加工参数计算[J].航空动力学报, 2017,32(08):2009-2016.
NIE Shaowu, DENG Jing, DENG Xiaozhong, etc. Tooth surface topology modification and processing parameters calculation for spiral bevel gears [J]. Journal of Aerospace Power, 2017,32(08):2009-2016.
[9] 刘志峰,郭春华,杨文通,蔡力钢,张志民.基于分段间隙函数的螺旋锥齿轮时变啮合参数分析[J].振动与冲击,2013,32(04):153-157+162.
LIU Zhifeng, GUO Chun-hua, YANG Wen-tong, etc.. Time-varying meshing parameters analysis for spiral bevel gear based on sub-clearance function[J]. Journal of Vibration and Shock, 2013,32(04):153-157+162.
[10] 王三民,沈允文,董海军.含间隙和时变啮合刚度的弧齿锥齿轮传动系统非线性振动特性研究[J].机械工程学报,2003(02):28-32.
WANG Sanmin, SHEN Yunwen, DONG Haijun. Nonlinear Dynamic Characteristics of a Spiral Bevel Gear System with Backlash and Time-carying Stiffness [J]. Journal of mechanical engineering,2003(02):28-32.
[11] 汪中厚,王杰,王巧玲,李刚.基于有限元法的螺旋锥齿轮传递误差研究[J].振动与冲击,2014,33 (14):165-170.
WANG Zhonghou, WANG Jie, WANG Qiaoling, etc. Transmission error of spiral bevel gear based on finite element method [J]. Journal of Vibration and Shock, 2014,33 (14):165-170.
[12] 汪中厚,王杰,马鹏程,李刚.真实齿面的螺旋锥齿轮动传递误差研究[J].振动与冲击,2014,33(15):138-143+156.
WANG Zhonghou, WANG Jie, MA Pengcheng, etc. Dynamic transmission error analysis of spiral bevel gears with actual tooth surfaces [J]. Journal of Vibration and Shock, 2014,33 (15):138-143+156.
[13] 唐进元, 彭方进. 准双曲面齿轮动态啮合性能的有限元分析研究[J].振动与冲击,2011,30(7):101-106.
TANG Jinyuan, PENG Fangjin. Finite element analysis for dynamic meshing of a pair of hypoid gears[J].Journal of Vibration and Shock, 2014,33 (15):138-143+156.
[14]Hu Z, Ding H, Peng S D, Tang Y, Tang J Y. Numerical determination to loaded tooth contact performances in consideration of misalignment for the spiral bevel gears[J]. International Journal of Mechanical Sciences,2018,151: 1-15.
[15] 杨建军,龚飞, 张华, 李天兴, 魏冰阳. 基于曲率修正的弧齿锥齿轮齿面设计[J].航空动力学报,2018,33(7):1743-1749.
YANG Jianjun, GONG Fei, ZHANG Hua, etc. Tooth Surface Design of Spiral Bevel gear Based on curvature correction[J]. Journal of Aerospace Power,2018,33(7):1743-1749.
[16] Peng S D, Ding H, Zhang G, Tang J Y, Tang Y. New determination to loaded transmission error of the spiral bevel gear considering multiple elastic deformation evaluations under different bearing supports[J]. Mechanism and Machine Theory,2019,137: 37-52.