Reliability sensitivity analysis of a vibration transfer path system based on stiffness degeneration

PDF(1709 KB)

Journal of Vibration and Shock ›› 2020, Vol. 39 ›› Issue (20) : 266-273.

WANG Xingang, YANG Lujie, ZHANG Xinyao, MA Ruimin

Author information +

History +

Abstract

A structural system must undergo stiffness degradation during the vibration process. By introducing the stiffness cumulative damage theory into the vibration differential equation, combined with the stochastic finite element method and the reliability theory, a mathematical model of the reliability and reliability sensitivity of the vibration transfer path system with random parameters considering stiffness degradation was obtained. The reliability and the reliability sensitivity to each random parameter of a tool holder system at the random parameter mean with the excitation frequency and time were obtained. The results show that the stiffness degradation caused the reliability and reliability sensitivity to random parameters to shift with time; the reliability sensitivity peak fluctuates with time; the peak value in the frequency domain at the initial time is not necessarily the maximum value in the time domain. The accuracy of the method was further proved by the Monte Carlo method. System stability can be enhanced by optimizing sensitive parameters; the resonance failure caused by the change of the resonance region with time can be effectively prevented.

Key words

reliability / reliability sensitivity / random parameters / stiffness degradation / transfer path

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

WANG Xingang, YANG Lujie, ZHANG Xinyao, MA Ruimin . Reliability sensitivity analysis of a vibration transfer path system based on stiffness degeneration[J]. Journal of Vibration and Shock, 2020, 39(20): 266-273

References

[1] Zio E. The Monte Carlo Simulation Method for System Reli-ability and Risk Analysis[M]. 2014.
[2] Huang L, Shuai H, Tao C, et al. The finite element method for the reliability analysis of lining structures based on Monte Carlo stochastic[J]. Cluster Computing, 2017, 20(4):1-13.
[3] Yu L, Meng L L, Liu K, et al. Chatter reliability of milling system based on first-order second-moment method[J]. International Journal of Advanced Manufacturing Technology, 2016, 87(1-4):1-9.
[4] 赵群,张义民,赵晋芳.非线性刚度振动传递路径系统灵敏度分析[J].东北大学学报(自然科学版),2009,30(8):1174-1177.
Zhao Q, Zhang Y, Zhao J. Sensitivity analysis of nonlinear stiffness vibration transfer path system[J].Journal of North-eastern University(Natural Science),2009,30(8):1174-1177.
[5] Li J, Mourelatos Z P. Time-dependent reliability estimation for dynamic problems using a niching genetic algorithm[J]. Journal of Mechanical Design, 2009, 131(7):071009.
[6] 叶欢.工程结构时变可靠性分析的随机过程模型[D].福州：福建师范大学，2015.
Ye H. Stochastic process model for time-varying reliability analysis of engineering structures [D]. Fuzhou: Fujian Normal University, 2015.
[7] 周志刚,徐芳.考虑强度退化和失效相关性的风电齿轮传动系统动态可靠性分析[J].机械工程学报,2016,52(11):80-87.
Zhou Z, Fang X U. Dynamic Reliability Analysis of Gear Transmission System of Wind Turbine Considering Strength Degradation and Dependent Failure[J]. Journal of Mechanical Engineering, 2016, 52(11):80-87.
[8] 于博洋.冲击载荷下附件传动系统动力学及疲劳特性研究[D]. 沈阳：沈阳工业大学，2017.
[9] Liu X F, Wu Z, Song M, et al. Based on the Theory of the Miner Fatigue Damage of Fuzziness Analysis and Mathemat-ical Modeling[J]. Applied Mechanics & Materials, 2013, 437:
124-128.
[10] 张义民,李鹤.机械振动学基础[M].高等教育出版社,2010.
[11] Huang X, Li Y, Zhang Y, et al. A new direct second-order reliability analysis method[J]. Applied Mathematical Modelling, 2018, 55: 68-80.
[12]赵薇.机械振动传递路径系统传递性的研究与应用[D].沈阳：东北大学, 2012.
[13]王新刚,常苗鑫,张恒,等.动力伺服刀架端齿盘分度精度可靠性灵敏度设计[J].东北大学学报(自然科学版),2017(6).
Wang X, Chang M, Zhang H, et al. Reliability and Sensitivity
Design of Indexing Accuracy of End Servo of Power Servo Tool Holder[J]. Journal of Northeastern University(Natural Science), 2017(6).