Factors affecting bolt loosening during material loosening period under impact loading

PDF(1441 KB)

Journal of Vibration and Shock ›› 2020, Vol. 39 ›› Issue (22) : 35-40.

WANG Kaiping，ZHANG Mingyuan，YAN Ming，WANG Peng，SU Donghai

Author information +

History +

Abstract

The loosening process of bolts is divided into two stages: material loosening period and structural loosening period.Looseness during material loosening period is mainly caused by plastic deformation.In order to study the factors affecting the bolt looseness during the loosening of material under impact load, an accurate bolting model was established.Then the Yamamoto method and Sopwith method were used to verify the validity of the model.Finally, a finite element simulation analysis was carried out to study the influences of the impact load magnitude, the initial pre-tightening force, the friction coefficient between the threaded mating surfaces and the initial gap of thread on the bolt loosening during material loosening period under impact load.The results show that the smaller the impact load magnitude and the smaller the initial gap of thread during loosening period, the less likely the bolt looseness will occur; there is an initial preload value or range, and there is also a friction coefficient value or range between the thread meshing surfaces to make the bolt loose the least likely to happen.

Key words

bolt loosening / material loosening period / impact load / amplitude / initial preload / friction coefficient / initial gap of thread

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

WANG Kaiping，ZHANG Mingyuan，YAN Ming，WANG Peng，SU Donghai. Factors affecting bolt loosening during material loosening period under impact loading[J]. Journal of Vibration and Shock, 2020, 39(22): 35-40

References

[1] 周文强，肖黎，屈文忠.基于经验模式分解的框架结构螺栓松动检测实验研究[J].振动与冲击，2016,35(08):201-206.
ZHOU Wen-qiang,XIAO Li,QU Wen-zhong.Experimental Study on Bolt Loosening Detection of Frame Structure Based on Empirical Mode Decomposition[J].Journal of Vibration and Shock,2016,35(08):201-206.
[2] 吴冠男，徐超.基于混沌超声波激励的螺栓联接松动检测研究[J].振动与冲击，2018,37(09):208-213.
WU Guan-nan,XU Chao.Study on the Loose Connection Detection of Bolt Connection Based on Chaotic Ultrasonic Excitation[J].Journal of Vibration and Shock,2018,37(09):208-213.
[3] 何先龙，佘天莉，徐兵，等.基于塔筒振动特性识别风机塔螺栓松动的研究[J].振动与冲击，2016,35(14):112-118.
HE Xian-long,QU Tian-li,XU Bing, et al.Research on the Looseness of Fan Tower Bolts Based on Tower Vibration Characteristics[J].Journal of Vibration and Shock,2016,35(14):112-118.
[4] 李小彭，李加胜，安镰锤，等.扭矩对钢轨接头螺栓疲劳寿命影响分析[J].中国工程机械学报，2016,14(02):104-108.
LI Xiao-peng,LI Jia-sheng,AN Lian-chui, et al.Analysis of the influence of torque on the fatigue life of rail joint bolts[J].Chinese Journal of Construction Machinery,2016,14(02):104-108.
[5] 侯世远，廖日东.螺纹联接松动过程的研究现状与发展趋势[J].强度与环境，2014,41(02):39-52.
Hou Shi-yuan,Liao Ri-dong.Research Status and Development Trend of Threaded Loosening Process[J].Strength and Environment,2014,41(02):39-52.
[6] Jiang Y and Chang J. Mechanical properties of bolted joints[R].Report No 1 Prepared for Ford motor company, August, 2000.
[7] Jiang Y, Chang J, Lee C, and Xu B. Experimental study of the torque-tension relation for bolted joints [J].International journal of materials and product technology, 2001, 16: 417-429.
[8] Jiang Y and Zhang M. Experimental investigation on self-loosening behavior of bolted joints under cyclic transverse loading [R].Report No 4 Prepared for Ford motor compan3，October, 2002.
[9] Jiang Y, Zhang M, Park, T W, and Lee, C H. An experimental investigation on self-loosening of bolted joints [C]. ASME PVP2003一1868.
[10] Jiang Y, and Zhang M. A study of early stage self -loosening of bolted joints[J]. ASME, Journal of mechanical design, 2003, 125: 518-526.
[11] Nassar S A andganganala M. Effect of load eccentricity on the behavior of a bolted joint with a yielded fastener [C]. ASME 2009 Pressure Vessels and Piping Conference.[S.l.]:ASME, 2009.
[12] Nassar S A and Matin P H. Clamp load loss due to fastener elongation beyond its elastic limit [J].ASME, Journal of pressure vessel technology, 2006, 128: 379-387.
[13] ESNA Division, America Corporation. Maintaining the tightness of threaded fasteners[Z],Union,NJ,USA, 1976.
[14] 侯世远. 螺纹联接松动机理研究[D].北京理工大学,2015.
HOU Shi-yuan. Research on loosening mechanism of threaded joints [D]. Beijing Institute of Technology, 2015.
[15] 于泽通，刘建华，张朝前，等.轴向交变载荷作用下螺栓联接结构的松动试验研究[J].摩擦学学报,2015,35(06):732-736.
YU Ze-tong,LIU Jian-hua,ZHANG Chao-qian,et al.Study on loosening test of bolted joint structure under axial alternating load[J].Tribology,2015,35(06):732-736.
[16] 王崴，徐浩，马跃，等.振动工况下螺栓联接自松弛机理研究[J].振动与冲击，2014,33(22):198-202.
WANG Wei,XU Hao,MA Yue,et al.Study on self-relaxation mechanism of bolted joints under vibration conditions[J].Journal of Vibration and Shock,2014,33(22):198-202.
[17] Dimitris Vartziotis,Joachim Wipper,Manolis Papadrakakis. Improving mesh quality and finite element solution accuracy bygETMe smoothing in solving the Poisson equation[J]. Finite Elements inAnalysis & Design,2013,66.
[18] 李海峰，吴冀川，刘健波，等.有限元网格剖分与网格质量判定指标[J].中国机械工程，2012,23(03):368-377.
LI Hai-feng, WU Yi-chuan, LIU Jian-bo, et al. Finite element meshing and grid quality judgment index[J]. China Mechanical Engineering, 2012, 23(03): 368-377.
[19] 山本晃. 螺纹联接的理论与计算[M].郭可谦，等译.上海科学技术文献出版社，1984.
YAMAMOTO Akira. Theory and calculation of threaded joints [M]. guo Keqian, et al. Shanghai Science and Technology Literature Publishing House, 1984.
[20] SOPWITH Dg.The distribution of load in screw threads[J].Proceedings of the Institution of Mechanical Engineers，1948, 159:373-383.
[21] 陈海平，曾攀，方刚，等.螺纹副承载的分布规律[J].机械工程学报，2010,46(09):171-178.
CHEN Hai-ping,ZENG Pan,FANG Gang, et al.Distribution law of thread secondary bearing[J].Chinese Journal of Mechanical Engineering,2010,46(09):171-178.