Speech intelligibility auto body panel contribution analysis and optimization

ZENG Falin1, LIU Yachen2, HU Feng2

Journal of Vibration and Shock ›› 2021, Vol. 40 ›› Issue (7) : 68-74.

PDF(1744 KB)
PDF(1744 KB)
Journal of Vibration and Shock ›› 2021, Vol. 40 ›› Issue (7) : 68-74.

Speech intelligibility auto body panel contribution analysis and optimization

  • ZENG Falin1, LIU Yachen2, HU Feng2
Author information +
History +

Abstract

As an important part of studying influence of auto body vibration on its interior noise, the analysis of auto body panel contribution is usually realized using acoustic transfer vector (ATV) simulation. Here, in order to further explore effects of vehicle body vibration on its interior speech intelligibility, objective parameters of speech intelligibility were compared with subjective evaluation scores to take the speech intelligibility index (SII) under unsteady acceleration condition as the evaluation index, and ATV simulation method was used to find out the panel having the maximum impact on speech intelligibility. The analysis results showed that the body roof panel has the maximum effect on speech intelligibility. Aiming at the analysis results, the method of combining genetic algorithm and ATV inverse operation simulation was used to perform targeted body roof damping and verify it. The results showed that the optimized design based on contribution of speech intelligibility of body panel can effectively improve the interior speech clarity under the unsteady full throttle acceleration condition, and improve the interior sound quality.

Key words

auto body panel contribution
/ acoustic transfer vector (ATV) calculation / speech intelligibility;speech intelligibility index (SII) / genetic algorithm

Cite this article

Download Citations
ZENG Falin1, LIU Yachen2, HU Feng2. Speech intelligibility auto body panel contribution analysis and optimization[J]. Journal of Vibration and Shock, 2021, 40(7): 68-74

References

[1]ABDEL ALIM O, MOKHTAR M A, EZZ-EI-ARAB M A.  Speech enhancement in the communication between  vehicles[C]//IEEE 39th Vehicular Technology Conference. San Francisco: IEEE, 1989.
[2]ONUSIC H, BAPTISTA E L,HAGE M M.Using SIL/PSIL  to estimate speech intelligibility in vehicles[C]//
SAE International SAE Brasil 2005 Congress and Exhibit. New York: SAE Technical, 2005.
[3]LU J, PYPER J. New windshield improves vehicle  interior cabin noise and articulation index[J]. Sound and Vibration, 2003, 37(12): 6-12.
[4]谭刚平.车内语音清晰度分析评价及其主动控制技术研究[D].长春:吉林大学,2013.
[5]PARIZET E. Influence of speech important function upon articulation index computation in cars[J]. Noise Control Engineering Journal, 1992, 38(2): 73-79.
[6]KAWAHARA H. Speech representation and transformation using adaptive in-terpolation of weighted spectrum: vocoder revisited[C]//IEEE International Conference on Acoustics, Speech and Signal Processing. Anaheim:
ICASSP, 1997.
[7]ZELTLER A, ZELLER P. Psychoacoustic modeling of soundattributes[C]//SAE 2006 World Congress & Exhibition.New York: SAE Technical,2006.
[8]HOELDRICH R,PFLUEGER M. A generalized psychoacoustical model of modulation parameters (roughness) for objective vehicle noise quality evaluation[C]// SAE Noise and Vibration Conference and Exposition. New York: SAE Technical,1999.
[9]马天飞,高刚,王登峰,等.基于声固耦合模型的车内低频结构噪声响应分析[J].机械工程学报,2011,47(15):76-82.
MA Tianfei,GAO Gang,WANG Dengfeng,et al.Analysis of noise response of low frequency structure in vehicle based on acoustic-solid coupling model[J].Chinese Journal of Mechanical Engineering,2011,47(15):76-82.
[10]周岐坤.某皮卡车身结构NVH性能仿真分析与控制[D].镇江:江苏大学,2016.
[11]汪伟,辛勇.车架有限元建模及模态分析[J].机械设计与制造,2009(11):53-54.
WANG Wei,XIN Yong.Finite element modeling and modal analysis of frame[J].Machinery Design & Manufacture,2009(11):53-54.
[12]SAMARDZIC N, NOVAK C. In-vehicle speech  intelligibility for different driving conditions using the speech transmission index [J]. Noise Control Engineering Journal, 2011, 59(4): 397-407.
[13]KARAN N,GAL R, BERTRAND D, et al. Speech intelligibility improvement in car noise environment by voice transformation[J].Speech Communication,2017,91:17-27.
[14]SAMARDZIC N, NOVAK C.In-vehicle application  of common speech intelligibility metrics [J]. International Journal of Vehicle Noise and Vibration, 2011, 4(7): 328-346.
[15]声学语言清晰度指数的计算方法:GB/T 15485—1995[S].北京:国家技术监督局.
[16]孙苏民.排气噪声声品质预测及控制技术研究[D].镇江:江苏大学,2018.
[17]石宏娟,樊文欣,郭常立,等.基于ATV的内燃机机体结构辐射噪声预测技术研究[J]. 机械设计与制造,2009(10):123-125.
SHI Hongjuan,FAN Wenxin,GUO Changli,et al. Study on radiation noise prediction technology of internal combustion engine structure based on ATV[J]. Mechanical Design and Manufacturing, 2009(10):123-125.
[18]曾发林,孙苏民.基于GA-BP 模型的消声器声品质预测与控制技术研究[J]. 机械设计与制造,2018(增刊2):35-39.
ZENG Falin,SUN Sumin.Study on sound quality prediction and control technology of muffler based on GA-BP model[J]. Mechanical Design & Manufacturing, 2018(Sup 2):35-39.
[19]王振宇.车身结构自由阻尼材料优化与局部振动控制[D]. 长春:吉林大学,2015.
PDF(1744 KB)

Accesses

Citation

Detail

Sections
Recommended

/