A study on the transient dynamic performance of integral dropper of simple chain suspension catenary

PDF(1474 KB)

Journal of Vibration and Shock ›› 2021, Vol. 40 ›› Issue (8) : 131-136.

HU Yan1，HUANG Panpan1，MA Ran1，CHEN Guangxiong2

Author information +

History +

Abstract

The integral dropper of a catenary system of Beijing—Tianjin high-speed railway was taken as the research object, and a coupling model of the pantograph-catenary system was established using a finite element method. The integral dropper was equivalent to a nonlinear spring which can only bear tension, and the coupling of the pantograph-catenary system was realized by a penalty function method. After verified the simulation model, the transient dynamic performance of integral dropper was studied. Results show that: while the relative speed between pantograph and catenary is 300 km/h or 350 km/h, the dominant frequency of dynamic force of different integral dropper in the same span is the same, and the dominant frequency is 7.8 Hz; While the relative speed is 300 km/h, the transverse vibration amplitude of different dropper′s upper and lower node is very small, which is less than 3 mm. Both the upper node and the lower node in a same dropper have the same vertical vibration phase, and the vibration dominant frequency of different dropper′s upper node or lower node is 1.42 Hz; while the relative speed range from 250-350 km/h, 3# dropper has a longest relaxation time compared with other droppers in a same spin.

Key words

high speed railway / integral dropper / catenary / dominant frequency

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

HU Yan1，HUANG Panpan1，MA Ran1，CHEN Guangxiong2. A study on the transient dynamic performance of integral dropper of simple chain suspension catenary[J]. Journal of Vibration and Shock, 2021, 40(8): 131-136

References

［1］吴积钦. 受电弓与接触网系统［M］.成都：西南交通大学出版社, 2010.
［2］谭德强, 莫继良, 彭金方,等. 高速接触网零部件失效问题研究现状及展望［J］. 西南交通大学学报,2018,53(3):188-197.
TAN Deqiang, MO Jiliang, PENG Jinfang,et al. Research and prospect on high-speed catenary component filure［J］. Journal of Southwest Jiaotong Univeristy,2015,53(3):188-197.
［3］刘志刚, 宋洋, 刘煜铖. 电气化高速铁路接触网微风振动特性［J］. 西南交通大学学报, 2015, 50(1):1-6.
LIU Zhigang, SONG Yang, LIU Yucheng. Aeolian vibration characteristics of electrified high-speed railway catenary［J］. Journal of Southwest Jiaotong Univeristy,2015,50(1):1-6.
［4］FACCHINETTI A ,BRUNI S . Hardware-in-the-loop hybrid simulation of pantograph-catenary interaction［J］. Journal of Sound and Vibration, 2012, 331(12):2783-2797.
［5］王国梁. 接触网融冰防冰问题的分析研究［J］. 铁道工程学报, 2009, 26(8):93-95.
WANG Guoliang. Analysis and study of the deicing and anti-icing for catenary［J］.Journal of Railway Engineering Society，2009，26(8) : 93-95．
［6］王贞, 林圣, 冯玎, 等. 考虑天气状态的接触网可靠性评估方法研究［J］. 铁道学报, 2018, 40(10):53-60.
WANG Zhen, LIN Sheng, FENG Ding, et al. Research on reliability evaluation method for catenary system considering weather condition［J］. Journal of the China Railway Society,2018, 40(10):53-60.
［7］ZHANG W , MEI G , WU X , et al. Hybrid simulation of dynamics for the pantograph-catenary system［J］. Vehicle System Dynamics, 2002, 38(6):393-414.
［8］VAN O V, MASSAT J P , LAURENT C , et al. Introduction of variability into pantograph-catenary dynamic simulations［J］. Vehicle System Dynamics, 2014, 52(10):1254-1269.
［9］刘志刚, 宋洋, 刘煜铖. 电气化高速铁路接触网微风振动特性［J］. 西南交通大学学报, 2015, 50(1):1-6.
LIU Zhigang，SONG Yang，LIU Yucheng．Aeolian vibration characteristics of electrified high-speed railway catenary［J］．Journal of Southwest Jiaotong University，2015, 50(1):1-6.
［10］江亚男，张卫华，宋冬利．高速铁路接触线不平顺线谱研究［J］．铁道学报，2015，37(2) : 34-38.
JIANG Yanan，ZHANG Weihua，SONG Dongli．Study on the contact wire unevenness of high-speed railway［J］. Journal of the China Railway Society，2015，37(2) : 34-38．
［11］李瑞平, 周宁, 吕青松, 等. 横风环境中弓网动力学性能分析［J］. 振动与冲击, 2014, 33(24):39-44.
LI Ruiping, ZHOU Ning, L Qingsong, et al．Pantograph-catenary dynamic behavior under cross wind ［J］. Journal of Vibration and Shock, 2014,33( 24) : 39-44．
［12］GREGORI S, TUR M, PEDROSA A, et al. A modal coordinate catenary model for the real-time simulation of the pantograph-catenary dynamic interaction［J］. Finite Elements in Analysis and Design, 2019, 162: 1-12.
［13］ZHOU N, ZHANG W. Investigation on dynamic performance and parameter optimization design of pantograph and catenary system［J］. Finite Elements in Analysis and Design, 2011, 47(3): 288-295.
［14］LIU Z, STICHEL S, RO/NNQUIST A. Application of tuned-mass system on railway catenary to improve dynamic performance［J］. Engineering Structures, 2018, 165: 349-358.
［15］ZHU B, REN Z, XIE W, et al. Active nonlinear partial-state feedback control of contacting force for a pantograph-catenary system［J］. ISA Transactions, 2019, 91: 78-89.
［16］LEE J H， PARK T W． Development of a three dimensional catenary model using cable elements based on absolute nodal coordinate formulation［J］．Journal of Mechanical Science and Technology，2012,26(12):3933-3941.
［17］JUNG S P，KIM Y G，PAIK J S，et al．Estimation of dynamic contact force between a pantograph and catenary using the finite element method［J］．Journal of Computational and Nonlinear Dynamics，2012,7(4):041006．
［18］魏超, 彭金方, 刘曦洋, 等. CuMg0.4合金弯曲微动疲劳损伤特性研究［J］. 摩擦学学报, 2018, 38(6):69-76.
WEI Chao, PENG Jinfang, LIU Xiyang, et al. Bending fretting fatigue damage characteristics of CuMg0.4 alloy［J］.Tribology,2018, 38(6):69-76.
［19］彭培火, 陈立明, 王伟, 等. 吊弦振动频率及幅度对疲劳寿命的影响分析［J］. 铁道科学与工程学报, 2019,16(2):471-477.
PENG Peihuo, CHEN Liming, WANG Wei, et al. The effect of frequency and amplitude of dropper on its fatigue life［J］. Journal of Railway Science and Engineering, 2019,16(2):471-477.
［20］陈立明. 高速受电弓作用下接触网整体吊弦动态力研究［J］. 中国铁道科学, 2018, 39(3):88-94.
CHEN Liming. Study on dynamic force of integral dropper of catenary under action of high-speed pantograph［J］. China Railway Science, 2018, 39(3):88-94.
［21］梅桂明. 受电弓-接触网系统动力学研究［D］.成都：西南交通大学, 2011.
［22］张卫华. 高速列车耦合大系统动力学研究［J］. 中国工程科学, 2015, 17(4):42-52.
ZHANG Weihua. Study on dynamics of coupled systems in high-speed trains［J］. Engineering Sciences, 2015, 17(4):42-52.