Tests and numerical simulation of wind-induced flying projectile impacting building float glass

PDF(1396 KB)

Journal of Vibration and Shock ›› 2022, Vol. 41 ›› Issue (1) : 24-30.

CHEN Sheng, HUANG Peng, GU Ming

Author information +

History +

Abstract

Laboratory tests and numerical simulations were used to study the impact damage of windborne debris on residential float glass. Firstly, failure test was carried out to evaluate the performance of float glass impacted by steel ball, and then a finite element model was constructed using LS-DYNA. The reliability of the model was verified by comparing the results of tests and numerical simulations. Finally, the impact effects of impact position, impact attitude and shape of the plate-like debris were analyzed based on the verified model. The results show that residential float glass is very vulnerable to debris impact, and the JH-2 constitutive model with a failure criterion of SIGP1=75 MPa for the float glass could closely simulate the failure of glass under impact loadings. The impact position of debris has little effect on the impact results, but the influence of impact attitude and shape of the debris cannot be ignored.

Key words

windborne debris / float glass / impact damage / numerical simulation

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

CHEN Sheng, HUANG Peng, GU Ming. Tests and numerical simulation of wind-induced flying projectile impacting building float glass[J]. Journal of Vibration and Shock, 2022, 41(1): 24-30

References

[1] MINOR J E. Lessons learned from failures of the building envelope in windstorms[J]. Journal of Architectural Engineering, 2005, 11(1): 10-13.
[2] 黄鹏, 陈胜, 黄舜杰. 背风墙面开孔的低矮房屋风致内压响应研究[J]. 振动与冲击, 2020, 39(15): 41-47.
HUANG Peng, CHEN Sheng, HUANG Shunjie. Wind-induced internal pressure response of low-rise buildings with leeward wall opening. Journal of Vibration and Shock, 2020, 39(15): 41-47.
[3] LIN N, VANMARCKE E. Windborne debris risk analysis - Part I. Introduction and methodology[J]. Wind and Structures, 2010, 13(2): 191-206.
[4] HUANG P, WANG F, FU A, et al. Numerical simulation of 3-D probabilistic trajectory of plate-type wind-borne debris[J]. Wind and Structures, 2016, 22(1): 17-41.
[5] HOLMES J D. Trajectories of spheres in strong winds with application to wind-borne debris[J]. Journal of Wind Engineering & Industrial Aerodynamics, 2004, 92(1):9-22.
[6] LIN N, HOLMES J D, LETCHFORD C W. Trajectories of wind-borne debris in horizontal winds and applications to impact testing[J]. Journal of Structural Engineering, 2007, 133(2): 274-282.
[7] LAM N T K, GAD E F, NURHUDA I, et al. Impact resistance of annealed glass panels[J]. Journal of Performance of Constructed Facilities, 2011, 25(5): 422-432.
[8] PYTTEL T, LIEBERTZ H, CAI J. Failure criterion for laminated glass under impact loading and its application in finite element simulation[J]. International Journal of Impact Engineering, 2011, 38(4): 252-263.
[9] BS EN 12600, Glass in building- pendulum test- impact test method and classification for flat glass[S]. London: British Standards Institution (BSI), 2002.
[10] 建筑用安全玻璃第2部分:钢化玻璃: GB 15763.2-2005[S]. 北京: 中国标准出版社, 2005.
Safety glazing materials in building—Part 2: Tempered glass: GB 15763.2-2005[S]. Beijing: Standards Press of China, 2005.
[11] 刘兵, 陈小伟. 平头弹穿透间隙式双层靶的穿甲模式[J]. 爆炸与冲击, 2016, 36(1): 24.
LIU Bing, CHEN Xiaowei. Perforation modes of double-layered plates with air space struck by a blunt rigid projectile[J]. Explosion and Shock Waves, 2016, 36(1): 24.
[12] 易伟建, 史先达. 钢筋混凝土剪力墙在冲击荷载作用下的数值模拟分析[J]. 振动与冲击, 2019, 38(13): 102-110.
YI Weijian, SHI Xianda. Numerical simulation analysis for RC shear walls under impact load. Journal of Vibration and Shock, 2019, 38(13): 102-110.
[13] TIMMEL M, KOLLING S, OSTERRIEDER P, et al. A finite element model for impact simulation with laminated glass[J]. International Journal of Impact Engineering, 2007, 34(8): 1465-1478.
[14] 刘奇, 刘军勇, 苗强, 等. 行人头冲击载荷下风挡玻璃的模拟和试验验证[J]. 汽车安全与节能学报, 2011, 2(2): 128-133.
LIU Qi, LIU Junyong, MIAO Qiang, et al. Simulation and test validation of windscreen subject to pedestrian head impact[J]. Journal of Automotive Safety and Energy, 2011, 2(2): 128-133.
[15] ZHANG X, HAO H, MA G. Laboratory test and numerical simulation of laminated glass window vulnerability to debris impact[J]. International Journal of Impact Engineering, 2013, 55: 49-62.
[16] 陈佳. 钢化玻璃安全性能的理论分析与实验研究[D]. 杭州: 浙江大学, 2014.
CHEN Jia. Theoretical analysis and experimental study on safety performance of tempered glass[D]. Hangzhou: Zhejiang University, 2014.
[17] CRONIN D S, BUI K, KAUFMANN C, et al. Implementation and validation of the Johnson-Holmquist ceramic material model in LS-Dyna[C] // Proc. 4th Eur. LS-DYNA Users Conf, 2003, 1: 47-60.
[18] JOHNSON G R, HOLMQUIST T J. Response of boron carbide subjected to large strains, high strain rates, and high pressures[J]. Journal of Applied Physics, 1999, 85(12): 8060-8073.
[19] HOLMQUIST T J, JOHNSON G R, LOPATIN C M, et al. High strain rate properties and constitutive modeling of glass[R]. Albuquerque: Sandia National Labs, 1995.
[20] HOLMQUIST T J, TEMPLETON D W, BISHNOI K D. Constitutive modeling of aluminum nitride for large strain, high-strain rate, and high-pressure applications[J]. International Journal of Impact Engineering, 2001, 25(3): 211-231.
[21] WILLS J A B, LEE B E, WYATT T A. A model of wind-borne debris damage[J]. Journal of Wind Engineering & Industrial Aerodynamics, 2002, 90(4): 555-565.